AS 4276.9:2019
$33.80
Water microbiology – Enterococci in water by membrane filtration using membrane – Enterococcus indoxyl-ß-D-glucoside agar (mEI)
Published By | Publication Date | Number of Pages |
AS | 2019-03-07 | 19 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
The objective of this Standard is to specify a method for the detection and enumeration of enterococci, also known as intestinal enterococci, in water by membrane filtration.
Scope
This Standard sets out a method for enumerating enterococci bacteria in water by membrane filtration.
NOTE 1 This method may not be suitable for isolation of strains of Streptococcus bovis and Streptococcus equinus that do not grow at 41 °C ± 0.5 °C.
NOTE 2 Membrane filtration is not suitable for turbid water samples.
NOTE 3 A flow diagram of the procedure is shown in Appendix A.
WARNING — THE SELECTIVE MEDIUM (mEI) USED IN THIS METHOD CONTAINS SODIUM AZIDE AND CYCLOHEXIMIDE. CAUTION SHALL BE EXERCISED DURING THE PREPARATION, USE, AND DISPOSAL OF THIS MEDIUM TO PREVENT INHALATION OR CONTACT.
Published Code | AS |
---|---|
Published By | Australia Standards |
Publication Date | 2019-03-07 |
Pages Count | 19 |
Language | English |
Edition | 1 |
File Size | 634.9 KB |
ISBN | 9781760723934 |
ICS Codes | 07.100.20 - Microbiology of water |
Related products
-
ASTM-F2769 2018(Redline)
F2769-18 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and…
-
ASTM-E2769 2015
E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled…
-
SAE AMS 4276B:2018
Aluminum Alloy, Sheet 4.4Cu – 1.5Mg – 0.60Mn (2024-O) Annealed, Fine Grained Published By Publication…
-
AS 4276.15:2014
Water microbiology – Examination for Vibrio cholerae Published By Publication Date Number of Pages AS…
-
ASTM-F2769 2010(Redline)
F2769-10 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and…
-
AS 4276.21:2019
Water microbiology – Examination for coliforms and Escherichia coli – Determination of most probable number…
-
ASTM-E2769 2011
E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled…
-
AS/NZS 4266.1:2017
Reconstituted wood-based panels – Methods of testing – Base panels Published By Publication Date Number…
-
AS 4276.5:2019
Water microbiology – Coliforms, Escherichia coli and thermotolerant coliforms – Membrane filtration method Published By…
-
ASTM-F2769 2009
F2769-09 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and…
-
AS 4276.22:2019
Water microbiology – Water quality – Enumeration of Escherichia coli and coliform bacteria – Membrane…
-
SAE AIR 4276A:2011
Survey Results: Computerization or Reliability, Maintainability & Supportability (RM&S) in Design Published By Publication Date…
-
ASTM-F2769 2016(Redline)
F2769-16 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and…
-
AS 4276.23:2016
Water microbiology – Soils, sediments, sludges, slurries and bio-solids – Procedures for sample preparation Published…
-
ASTM-F2769 2014
F2769-14 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and…
-
ASTM-E2769 2013(Redline)
E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled…
-
ISO 22769:2009
Oil of Australian sandalwood [Santalum spicatum (R.Br.) A.DC.] Published By Publication Date Number of Pages…
-
ASTM-E2769 2018(Redline)
E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled…
-
AS 4276.14:2014
Water microbiology – Detection of Salmonella spp. (ISO 19250:2010, MOD) Published By Publication Date Number…
-
ASTM-F2769 2018
F2769-18 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and…
-
AS 4176.1:2010
Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold water plumbing…
-
ASTM-E2769 2018
E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled…
-
IEC 62769-2:2015
Intégration des appareils de terrain (FDI) – Partie 2: Client FDI Published By Publication Date…
-
AS 4276.19:2014
Water microbiology – Examination for thermophilic Campylobacter spp. – Membrane filtration Published By Publication Date…
-
SAE AS 27649/1:2017
Bearing, Ball, Airframe, Antifriction, Intermediate Duty Corrosion Resistant Nitrogen Steel (CREN) Published By Publication Date…
-
ASTM-F2769 2010
F2769-10 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and…
-
BS ISO 22769:2009 2010
Oil of Australian sandalwood (Santalum spicatum (R.Br.) A.DC.) Published By Publication Date Number of Pages…
-
AS 4176.8:2010
Multilayer pipes for pressure applications – Multilayer pipe systems for consumer gas installations with a…
-
ASTM-F2769 2016
F2769-16 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and…
-
AS 4176.2:2010
Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold water plumbing…
-
AS/NZS 4266.2:2017
Reconstituted wood-based panels – Methods of testing – Decorative overlaid panels Published By Publication Date…
-
AS 4176.3:2010
Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold water plumbing…
-
AS 4176.5:2010
Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold water plumbing…
-
ASTM-E2769 2016(Redline)
E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled…
-
ASTM-E2769 2013
E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled…
-
AS/NZS ISO 7176.9:2013
Wheelchairs – Climatic tests for electric wheelchairs Published By Publication Date Number of Pages AS…
-
AS 4176.7:2010
Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold water plumbing…
-
ASTM-E2769 2016
E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled…
-
IEC 62769-7:2015
Field Device Integration (FDI) – Part 7: FDI Communication Devices Published By Publication Date Number…
-
IEC 62769-6:2015
Intégration des appareils de terrain (FDI) – Partie 6: Mapping de technologies FDI Published By…