ASTM-C185:2002 Edition
$35.75
C185-02 Standard Test Method for Air Content of Hydraulic Cement Mortar
Published By | Publication Date | Number of Pages |
ASTM | 2002 | 3 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This test method covers the determination of the air content of hydraulic cement mortar under the conditions hereinafter specified.
1.2 The values stated in SI units are to be regarded as the standard.
1.3 Values in SI shall be obtained by measurement in SI units or by appropriate conversion, using the Rules for Conversion and Rounding in IEEE/ASTM SI 10, of measurements made in other units.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.5 Warning Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.
Standard Title | C185-02 Standard Test Method for Air Content of Hydraulic Cement Mortar |
---|---|
Published Code | ASTM |
Publication Date | 2002 |
Pages Count | 3 |
ICS Codes | 91.100.10 - Cement. Gypsum. Lime. Mortar |
This document does not provide a preview.
Related products
-
ASTM-C1852:2020 Edition
C1852-20 Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives Published By…
-
ASTM-C1859:2017 Edition
C1859-17a Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall…
-
ASTM-C1858:2017 Edition
C1858-17a Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type…
-
ASTM-C1850:2017 Edition
C1850-17 Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use…
-
ASTM-C185:2008 Edition
C185-08 Standard Test Method for Air Content of Hydraulic Cement Mortar Published By Publication Date…
-
ASTM-C1859:2023 Edition(Redline)
C1859-23 Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind…
-
ASTM-C185:2015 Edition(Redline)
C185-15a Standard Test Method for Air Content of Hydraulic Cement Mortar (Redline) Published By Publication…
-
ASTM-C1859:2019 Edition(Redline)
C1859-19 Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind…
-
ASTM-C185:2015 Edition
C185-15 Standard Test Method for Air Content of Hydraulic Cement Mortar Published By Publication Date…
-
ASTM-C1859:2021 Edition(Redline)
C1859-21 Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind…
-
ASTM-C185:2001 Edition
C185-01 Standard Test Method for Air Content of Hydraulic Cement Mortar Published By Publication Date…
-
ASTM-C1859:2018 Edition(Redline)
C1859-18 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall…
-
ASTM-C185:2015 Edition
C185-15a Standard Test Method for Air Content of Hydraulic Cement Mortar Published By Publication Date…
-
ASTM-C1853:2017 Edition
C1853-17 Standard Test Method for The Determination of Carbon (Total) Content in Mixed Oxide ((U,…
-
ASTM-C1859:2017 Edition(Redline)
C1859-17a Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall…
-
ASTM-C1857/C1857M:2019 Edition
C1857/C1857M-19 Standard Test Method for Evaluating the Adhesion (Pull-Off) Strength of Concrete Repair and Overlay…
-
ASTM-C1858:2017 Edition(Redline)
C1858-17a Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type…
-
ASTM-C1858:2021 Edition
C1858-17a(2021) Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type…
-
ASTM-C1850:2021 Edition
C1850-17(2021) Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use…
-
ASTM-C1859:2021 Edition
C1859-21 Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind…
-
ASTM-C1858/C1858M:2024 Edition(Redline)
C1858/C1858M-24 Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type…
-
ASTM-C1852:2020 Edition(Redline)
C1852-20 Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives (Redline) Published…
-
ASTM-C1855:2018 Edition
C1855-18 Standard Test Method for Determination of Uranium and Plutonium Concentration in Aqueous Solutions Using…
-
ASTM-C1859:2018 Edition
C1859-18 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall…
-
ASTM-C185:2020 Edition
C185-20 Standard Test Method for Air Content of Hydraulic Cement Mortar Published By Publication Date…
-
ASTM-C1858/C1858M:2024 Edition
C1858/C1858M-24 Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type…
-
ASTM-C1859:2023 Edition
C1859-23 Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind…
-
ASTM-C1859:2019 Edition
C1859-19 Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind…
-
ASTM-C185:2008 Edition(Redline)
C185-08 Standard Test Method for Air Content of Hydraulic Cement Mortar (Redline) Published By Publication…
-
ASTM-C185:2020 Edition(Redline)
C185-20 Standard Test Method for Air Content of Hydraulic Cement Mortar (Redline) Published By Publication…
-
ASTM-C1858:2017 Edition
C1858-17 Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems…
-
ASTM-C1851:2023 Edition
C1851-18(2023) Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference…
-
ASTM-C1851:2018 Edition
C1851-18 Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference…
-
ASTM-C1854:2017 Edition
C1854-17 Standard Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide…
-
ASTM-C1856/C1856M:2017 Edition
C1856/C1856M-17 Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete Published By Publication…
-
ASTM-C185:1999 Edition
C185-99 Standard Test Method for Air Content of Hydraulic Cement Mortar Published By Publication Date…
-
ASTM-C185:2019 Edition
C185-19 Standard Test Method for Air Content of Hydraulic Cement Mortar Published By Publication Date…
-
ASTM-C1859:2017 Edition
C1859-17 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall…
-
ASTM-C185:2019 Edition(Redline)
C185-19 Standard Test Method for Air Content of Hydraulic Cement Mortar (Redline) Published By Publication…
-
ASTM-C1852:2017 Edition
C1852-17 Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives Published By…