ASTM-D3757 2016
$29.79
D3757-16 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
Published By | Publication Date | Number of Pages |
ASTM | 2016 | 2 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
ASTM D3757-16
Active Standard: Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
ASTM D3757
Scope
1.1 This is a guide for preparing specifications for solvent-based floor polishes (liquid or paste) that are intended for use on all wood and solvent-resistant floors.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Keywords
floor polishes; floor wax; liquid wax; paste wax; solvent based polish; solvent based wax ;
ICS Code
ICS Number Code 71.100.99 (Other products of the chemical industry)
DOI: 10.1520/D3757-16
Standard Title | D3757-16 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes |
---|---|
Published Code | ASTM |
Publication Date | 2016 |
Pages Count | 2 |
ICS Codes | 71.100.99 - Other products of the chemical industry |
This document does not provide a preview.
Related products
-
ASTM-D3557 2012
D3557-12 Standard Test Methods for Cadmium in Water Published By Publication Date Number of Pages…
-
ASTM-D3755 2014
D3755-14 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating…
-
ASTM-D7357 2012
D7357-07(2012) Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete Published By Publication Date Number of…
-
ASTM-D3756 2018(Redline)
D3756-18 Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid…
-
ASTM-D3752 2011
D3752-98(2011) Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix Published By…
-
ASTM-D3557 2012(Redline)
D3557-12 Standard Test Methods for Cadmium in Water (Redline) Published By Publication Date Number of…
-
ASTM-D3757 2016(Redline)
D3757-16 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes (Redline) Published By Publication Date…
-
ASTM-D3753 2019(Redline)
D3753-19 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells (Redline) Published By Publication Date…
-
ASTM-D3775 2012(Redline)
D3775-12 Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics (Redline)…
-
ASTM-D3787 2011
D3787-07(2011) Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test Published By…
-
ASTM-D3257 2012
D3257-06(2012) Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography Published By Publication…
-
ASTM-D7757 2012
D7757-12 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive…
-
ASTM-D3557 2017(Redline)
D3557-17 Standard Test Methods for Cadmium in Water (Redline) Published By Publication Date Number of…
-
ASTM-D3957 2006
D3957-06 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings Published…
-
ASTM-D3754 2014
D3754-14 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe Published By Publication…
-
ASTM-D3787 2016(Redline)
D3787-16 Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test (Redline) Published…
-
ASTM-D3737 2018
D3737-18e1 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) Published By…
-
ASTM-D3737 2018
D3737-18 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) Published By…
-
ASTM-D3754 2014(Redline)
D3754-14 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe (Redline) Published By…
-
ASTM-D3753 2019
D3753-19 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells Published By Publication Date Number…
-
ASTM-D5757 2011
D5757-11 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air…
-
ASTM-D3737 2006
D3737-06 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) Published By…
-
ASTM-D3775 2012
D3775-12 Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics Published…
-
ASTM-D3758 2010
D3758-95(2010) Standard Practice for Evaluation of Spray-Buff Products on Test Floors Published By Publication Date…
-
ASTM-D3759 2011
D3759/D3759M-05(2011) Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape Published By Publication…
-
ASTM-D3752 2006
D3752-98(2006) Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix Published By…
-
ASTM-D3757 2010
D3757-89(2010) Standard Guide for Preparing Specifications for Solvent-based Floor Polishes Published By Publication Date Number…
-
ASTM-D3787 2016
D3787-16 Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test Published By…
-
ASTM-D3775 2017
D3775-17e1 Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics Published…
-
ASTM-D3577 2019(Redline)
D3577-19 Standard Specification for Rubber Surgical Gloves (Redline) Published By Publication Date Number of Pages…
-
ASTM-D3577 2015
D3577-09(2015) Standard Specification for Rubber Surgical Gloves Published By Publication Date Number of Pages ASTM…
-
ASTM-D7757 2017
D7757-17 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive…
-
ASTM-D375/D375M 2017
D375/D375M-95(2017) Standard Specification for Asbestos Roving Published By Publication Date Number of Pages ASTM 2017…
-
ASTM-D3754 2019
D3754-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe Published By Publication…
-
ASTM-D3754 2011
D3754-11 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe Published By Publication…
-
ASTM-D3752 2019
D3752-98(2019) Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix Published By…
-
ASTM-D3577 2019
D3577-19 Standard Specification for Rubber Surgical Gloves Published By Publication Date Number of Pages ASTM…
-
ASTM-D3753 2012
D3753-12 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells Published By Publication Date Number of…
-
ASTM-D3756 2018
D3756-18 Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid…
-
ASTM-D7357 2019
D7357-07(2019) Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete Published By Publication Date Number of…