BS EN 12269-1:2000
$86.31
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the “beam test” – Short term test
| Published By | Publication Date | Number of Pages |
| BSI | 2000 | 12 |
This European Standard specifies a method of determining the bond behaviour between reinforcing bars and autoclaved aerated concrete (AAC) in prefabricated reinforced components according to prEN 12602. The test method is conceived to obtain values for the short term bond strength, tbm, with different combinations of concrete type, bar shape and corrosion protection system.Measurement of tensile force in reinforcement at point of flexural failure in a specially prepared composite specimen.
Related products
-
BS EN 12269-2:2003:2004 Edition
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the “beam…
-
BS EN 12259-4:2000:2002 Edition
Fixed firefighting systems. Components for sprinkler and water spray systems – Water motor alarms Published…
-
BS EN ISO 12209-2:2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air – Threaded connections…
-
BS 8621:2004:2007 Edition
Thief resistant lock assembly. Keyless egress Published By Publication Date Number of Pages BSI 2007…
-
BS EN 12268:2003+A1:2010
Food processing machinery. Band saw machines. Safety and hygiene requirements Published By Publication Date Number…
-
BS EN 12209:2003:2006 Edition
Building hardware. Locks and latches. Mechanically operated locks, latches and locking plates. Requirements and test…
-
BS EN 12267:2003+A1:2010
Food processing machinery. Circular saw machines. Safety and hygiene requirements Published By Publication Date Number…
-
BS EN 12629-8:2002+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Machines and…
-
BS EN 15269-1:2010
Extended application of test results for fire resistance and/or smoke control for door, shutter and…
-
BS EN 12629-4:2001+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Concrete roof…
-
BS EN 12229:2007
Surfaces for sports areas. Procedure for the preparation of synthetic turf and needle-punch test pieces…
-
BS EN 12259-3:2000:2006 Edition
Fixed firefighting systems. Components for sprinkler and water spray systems – Dry alarm valve assemblies…
-
BS EN 12229:2000
Surfaces for sports areas. Procedure for the preparation of synthetic turf and textile pieces Published…
-
BS EN ISO 12209:2013+A1:2016:2018 Edition
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air Published By Publication…
-
BS EN 12269-2:2010
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam…
-
BS EN 12266-1:2003
Industrial valves. Testing of valves – Pressure tests, test procedures and acceptance criteria. Mandatory requirements…
-
BS EN 12569:1999:2001 Edition
Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests Published By Publication…
-
BS EN 12629-6:2004+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Stationary and…
-
BS EN 12629-5-2:2003+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Pipe making…
-
BS EN 12629-5-4:2003+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Concrete pipe…
-
BS EN 12629-7:2004+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Stationary and…
-
BS EN 12629-1:2000+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Common requirements…
-
BS EN 12369-1:2001
Wood-based panels. Characteristic values for structural design – OSB, particleboards and fireboards Published By Publication…
-
BS 9251:2021
Fire sprinkler systems for domestic and residential occupancies. Code of practice Published By Publication Date…
-
BS 3621:2004:2007 Edition
Thief resistant lock assembly. Key egress Published By Publication Date Number of Pages BSI 2007…
-
BS EN 12629-5-1:2003+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Pipe making…
-
BS EN 12259-3:2000:2006 Edition
Fixed firefighting systems. Components for sprinkler and water spray systems – Dry alarm valve assemblies…
-
BS 5266-10:2008
Guide to the design and provision of emergency lighting to reduce the risks from hazards…
-
BS 341-1:1962
Transportable gas container valves – Valves with taper stems (excluding valves used for breathing and…
-
BS EN 15269-20:2009
Extended application of test results for fire resistance and/ or smoke control for door, shutter…
-
BS EN 12261:2002:2006 Edition
Gas meters. Turbine gas meters Published By Publication Date Number of Pages BSI 2006 56
-
BS EN 12266-2:2002:2003 Edition
Industrial valves. Testing of valves – Tests, test procedures and acceptance criteria. Supplementary requirements Published…
-
BS EN 12629-5-3:2003+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Pipe prestressing…
-
BS EN 12629-3:2002+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Slide and…
-
BS EN ISO 12209-3:2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air – Adaptor for…
-
BS EN ISO 12569:2001
Thermal insulation in buildings. Determination of air change in buildings. Tracer gas dilution method Published…
-
BS EN 12629-2:2002+A1:2010
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety – Block making…
-
BS ISO 11269-2:2005:2009 Edition
Soil quality. Determination of the effects of pollutants on soil flora – Effects of chemicals…
-
BS EN ISO 12209-1:2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air – Yoke type…
-
BS 6323-1:1982
Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes –…
