BSI 20/30403657 DC 2020
$13.70
BS EN 12184. Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
Published By | Publication Date | Number of Pages |
BSI | 2020 | 67 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This document specifies requirements and test methods for electrically powered wheelchairs, with a maximum speed not exceeding 20 km/h, intended to carry one person of mass not greater than 300 kg, including:
-
electrically powered scooters with three or more wheels,
-
manual wheelchairs with an add-on drive system,
-
handrim-activated power-assisted wheelchairs,
-
electrically powered stand-up wheelchairs,
-
balancing wheelchairs,
-
wheelchairs with a pivot drive wheel unit, and
-
assistant-guided wheelchairs.
This document does not apply to custom-made electrically powered wheelchairs or electrically powered wheelchairs intended for use in sports.
This document also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment.
Status | Definitive |
---|---|
Pages | 67 |
Publication Date | 2020-09-10 |
Standard Number | 20/30403657 DC |
Title | BS EN 12184. Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods |
Identical National Standard Of | prEN 12184 |
Descriptors | Motor cycles, Vehicle lights, Inclined, Stability testing, Braking systems, Grades (quality), Noise (environmental), Wheelchairs, Medical equipment, Angles (geometry), Velocity, Electrically-operated devices, Feet (anatomy), Instructions for use, Electrical testing, Water-resistance tests, Weight (mass), Seating, Battery chargers, Corrosion, Mechanical testing, Electrical safety, Vehicle reflectors, Control equipment, Aids for the disabled, Dimensions, Handbooks, Testing conditions, Design, Position, Control devices, Acoustic testing, Performance, Ergonomics, Performance testing, Test dummies |
Publisher | BSI |
Committee | CH/173 |
ICS Codes | 11.180.10 - Aids and adaptation for moving |
Related products
-
BSI 20/30401652 DC:2020 Edition
BS ISO 13493. Meat and meat products. Determination of chloramphenicol content. Reference method Published By…
-
BSI 20/30403654 DC 2020
BS EN 14894. LPG equipment and accessories. Cylinder and drum marking Published By Publication Date…
-
BSI 20/30403626 DC 2020
BS EN 482. Workplace exposure. Procedures for the determination of the concentration of chemical agents.…
-
BSI 21/30430654 DC:2021 Edition
BS EN IEC 61196-4-1. Coaxial communication cables – Part 4-1. Blank detail specification for radiating…
-
BSI 20/30401697 DC:2020 Edition
BS EN ISO 6346 AMD4. Freight containers. Coding, identification and marking Published By Publication Date…
-
BSI 20/30403497 DC 2020
BS ISO 12856-1. Railway applications. Polymeric composite sleepers bearers and transoms – Part 1. Material…
-
BSI 20/30403620 DC 2020
BS EN 1493. Vehicle lifts Published By Publication Date Number of Pages BSI 2020 91
-
BSI 21/30403058 DC:2021 Edition
BS ISO 21629-2. Bamboo floorings – Part 2. Outdoor use Published By Publication Date Number…
-
BSI 20/30403957 DC 2020
BS EN IEC 60974-12. Arc welding equipment – Part 12. Coupling devices for welding cables…
-
BSI 20/30403665 DC 2020
BS EN IEC 60700-3. Thyristor valves for high voltage direct current (HVDC) power transmission –…
-
BSI 20/30430757 DC 2020
BS EN 50122-1. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit –…
-
BSI 20/30403965 DC 2020
BS EN IEC 60404-12. Magnetic materials – Part 12. Methods of test for the assessment…
-
BSI 20/30403660 DC 2020
BS EN 12183. Manual wheelchairs. Requirements and test methods Published By Publication Date Number of…
-
BSI 20/30406557 DC 2020
BS EN ISO 20765. Natural gas. Calculation of thermodynamic properties – Part 5. Calculation of…
-
BSI 20/30403636 DC 2020
BS EN 746-2. Industrial thermoprocessing equipment – Part 2. Safety requirements for combustion and fuel…
-
BSI 20/30409057 DC 2020
BS EN 16647 AMD1. Fireplaces for liquid fuels. Decorative appliances producing a flame using alcohol…
-
BSI 20/30401658 DC:2020 Edition
BS ISO 4134. Meat and meat products. Determination of L-(+)-glutamic acid content. Reference method Published…
-
BSI 20/30403853 DC 2020
BS EN ISO 898-3 AMD1. Mechanical properties of fasteners made of carbon steel and alloy…
-
BSI 20/30402687 DC 2020
BS EN ISO 14287. Plain bearings. Pad materials for tilting pad bearings Published By Publication…
-
BSI 20/30403623 DC 2020
BS EN 15269-3. Extended application of test results for fire resistance and/or smoke control for…
-
BSI 20/30406573 DC 2020
BS ISO 16287. Plain bearings. Thermoplastic bushes. Dimensions and tolerances Published By Publication Date Number…
-
BSI 21/30404367 DC:2021 Edition
BS EN ISO 5467-1. Dentistry. Mobile dental units and patient chairs – Part 1. General…
-
BSI 20/30403669 DC 2020
BS IEC 62590-1. Railway applications. Fixed installations. Electronic Power Converters – Part 1. General requirements…
-
BSI 20/30406653 DC 2020
BS EN 62604-2. Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed…
-
BSI 22/30406567 DC 2022
BS ISO/IEC 15444-17. Information technology. JPEG 2000 image coding system – Part 17. Extensions for…
-
BSI 20/30400647 DC 2020
BS ISO 23512. Plastics. Joining of thermoplastic moulded components. Specification of variables for thermal joining…
-
BSI 20/30403517 DC:2020 Edition
BS EN IEC 63203-402-2 ED1. Wearable electronic devices and technologies – Part 402-2. Performance Measurement…
-
BSI 20/30402757 DC 2020
BS EN ISO 21219-1. Intelligent transport systems. Traffic and travel information (TTI) via transport protocol…
-
BSI 20/30403649 DC 2020
BS EN 17508. Plastics. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors.…
-
BSI 20/30408367 DC 2020
BS EN ISO/IEC 20008-2 AMD1. Information technology. Security techniques. Anonymous digital signatures – Part 2.…
-
BSI 20/30409857 DC 2020
BS ISO 15222. Truck and bus tyres. Method for measuring relative wet grip performance. Loaded…
-
BSI 21/30430957 DC:2021 Edition
BS ISO 18951-1. Imaging materials. Scratch resistance of photographic prints – Part 1. General test…
-
BSI 20/30406576 DC 2020
BS EN ISO 15841 AMD1. Dentistry. Wires for use in orthodontics Published By Publication Date…
-
BSI 20/30400675 DC 2020
BS ISO/IEC 18181-1. Information technology. JPEG XL Image Coding System – Part 1. Core coding…
-
BSI 20/30403750 DC 2020
BS ISO 17442-1. Financial services. Legal entity identifier (LEI) – Part 1. Assignment Published By…
-
BSI 20/30403352 DC 2020
BS EN IEC 63145-22-20. Eyewear display – Part 22-20. Measurement methods for AR type. Image…
-
BSI 20/30401557 DC:2020 Edition
BS ISO 21626-2. Bamboo charcoal – Part 2. Fuel applications Published By Publication Date Number…
-
BSI 20/30403697 DC 2020
BS EN ISO 10140-1. Acoustics. Laboratory measurement of sound insulation of building elements – Part…
-
BSI 20/30403055 DC 2020
BS ISO 21629-1. Bamboo floorings – Part 1. Indoor use Published By Publication Date Number…
-
BSI 23/30423657 DC 2023
BS EN IEC 60068-3-14. Environmental testing – Part 3-14. Supporting documentation and guidance. Developing a…