ISO 1392:1977
$13.00
Determination of crystallizing point — General method
| Published By | Publication Date | Number of Pages |
| ISO | 1977-02 | 6 |
The method is applicable in the range from about -50 °C to about +250 °C. the determination can be carried out directly on the sample as received, or on the dried sample, or on both. In which of these conditions the sample is to be tested will be stated in the specific test method for each material. The principle is based on cooling the liquid or liquefied sample and observation of the temperature during crystallization under defined conditions. Samples with a higher water content, e.g. pastes, shall be dried before in every case. – Replaces ISO Recommendation R 1392-1970.
Related products
-
ISO 1390-4:1977
Maleic anhydride for industrial use — Methods of test — Part 4: Determination of maleic…
-
ISO 1992-1:1974
Commercial refrigerated cabinets — Methods of test — Part 1: Calculation of linear dimensions, areas…
-
BS EN ISO 13920:1997
Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position Published…
-
BS 5598-4:1979
Methods of sampling and test for halogenated hydrocarbons – Determination of acidity, titrimetric method Published…
-
BS 4116-3:1992
Conveyor chains, their attachments and associated chain wheels – Specification of attachments (metric series) Published…
-
ISO 1390-2:1977
Maleic anhydride for industrial use — Methods of test — Part 2: Measurement of colour…
-
ISO 1394:1977
Liquid halogenated hydrocarbons for industrial use — Determination of cloud point Published By Publication Date…
-
ISO 1992-8:1978
Commercial refrigerated cabinets — Test methods — Part 8: Test for accidental mechanical contact Published…
-
ISO 1992-4:1974
Commercial refrigerated cabinets — Methods of test — Part 4: Defrosting test Published By Publication…
-
BS 4116-1:1992
Conveyor chains, their attachments and associated chain wheels – Specification for chains (metric series) Published…
-
IEEE/ISO/IEC 9945 2009
IEEE/ISO/IEC International Standard – Information technology Portable Operating System Interface (POSIX(TM)) Base Specifications, Issue 7…
-
ISO 1997:1992
Granulated cork and cork powder — Classification, properties and packing Published By Publication Date Number…
-
ISO 1391-2:1976
Paraformaldehyde for industrial use — Methods of test — Part 2: Determination of ash Published…
-
BS EN 13044-3:2011
Intermodal Loading Units. Marking – Markings of semi-trailers related to rail operation Published By Publication…
-
ISO 1992-2:1973/Amd 1:1979
Commercial refrigerated cabinets — Methods of test — Part 2: General test conditions — Amendment…
-
BS 1142:1989
Specification for fibre building boards Published By Publication Date Number of Pages BSI 1989 46
-
ISO 1391-4:1976
Paraformaldehyde for industrial use — Methods of test — Part 4: Determination of water-insoluble matter…
-
BS EN ISO 13920:1997
Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position Published…
-
BS 5706:1979
Methods for the determination of thiosulphate and other residual chemicals in processed photographic films, plates…
-
BS 949-1:1992:2008 Edition
Screwing taps – Specification of general dimensions Published By Publication Date Number of Pages BSI…
-
ISO 1391-1:1976
Paraformaldehyde for industrial use — Methods of test — Part 1: General Published By Publication…
-
ISO 1390-6:1977
Maleic anhydride for industrial use — Methods of test — Part 6: Determination of iron…
-
ISO 1390-1:1977
Maleic anhydride for industrial use — Methods of test — Part 1: General Published By…
-
ISO 1390-5:1977
Maleic anhydride for industrial use — Methods of test — Part 5: Determination of ash…
-
BS 2782:1970:1987 Edition
Methods of testing plastics Published By Publication Date Number of Pages BSI 1987 46
-
ISO 1992-3:1973
Commercial refrigerated cabinets — Methods of test — Part 3: Temperature test Published By Publication…
-
ISO 1390-3:1977
Maleic anhydride for industrial use — Methods of test — Part 3: Determination of free…
-
ISO 1395:1977
Short pitch transmission precision bush chains and chain wheels Published By Publication Date Number of…
-
BS 308-2:1985
Engineering drawing practice – Recommendations for dimensioning and tolerancing of size Published By Publication Date…
-
BS 5598-5:1979
Methods of sampling and test for halogenated hydrocarbons – Determination of cloud point Published By…
-
ISO 1797-2:1992
Dental rotary instruments — Shanks — Part 2: Shanks made of plastics Published By Publication…
-
ISO 1992-5:1974
Commercial refrigerated cabinets — Methods of test — Part 5: Water vapour condensation test Published…
-
BS ISO 1997:1992:1993 Edition
Granulated cork and cork powder. Classification, properties and packing Published By Publication Date Number of…
-
ISO 1391-3:1976
Paraformaldehyde for industrial use — Methods of test — Part 3: Determination of iron content…
-
ISO 1692:1976
Sodium and potassium silicates for industrial use — Determination of total alkalinity — Titrimetric method…
-
ISO 13902:1997
Steel and iron — Determination of high sulfur content — Infrared absorption method after combustion…
-
ISO 1592:1977
Urea for industrial use — Determination of nitrogen content — Titrimetric method after distillation Published…
-
ISO 1992-3:1973/Amd 1:1980
Commercial refrigerated cabinets — Methods of test — Part 3: Temperature test — Amendment 1…
-
ISO 1393:1977
Liquid halogenated hydrocarbons for industrial use — Determination of acidity — Titrimetric method Published By…
-
ISO 1992-2:1973
Commercial refrigerated cabinets — Methods of test — Part 2: General test conditions Published By…
