AS 1079.5:2003
$33.80
Packaging of items (sterile) for patient care – Single-use, non-woven wrapping materials – For goods undergoing sterilization in health care facilities
| Published By | Publication Date | Number of Pages |
| AS | 2003-11-10 | 20 |
Specifies requirements for single-use non-woven materials made of natural or man-made (synthetic) fibres or their blends intended for use as non-reusable wraps for goods undergoing sterilization in health care facilities.
Scope
This Standard specifies requirements for single-use non-woven materials made of natural or man-made (synthetic) fibres or their blends intended for use as non-reusable wraps for goods undergoing sterilization in health care facilities.
NOTES:
1 It is not intended that this Standard inhibit the innovative usage of new non-woven materials, provided that any materials used comply with the requirements of the Standard.
2 Wraps made of paper are dealt with in AS 1079.2.
3 Products meeting this Standard may be suitable for use in the medical device industry.
Related products
-
ISO 17095:2013
Céramiques techniques — Méthode d’essai pour la résistance de l’interface des matériaux céramiques à températures…
-
AS 1473.5:2001
Wood processing machinery – Safety – Finishing machinery – Moulding machines and routers with rotating…
-
AS 5079.1:2003 (R2014)
Filing cabinets – Lateral filing cabinets (ANSI BIFMA X5.2-1997, MOD) Published By Publication Date Number…
-
AS/NZS 60079.5:2007
Explosive atmospheres – Equipment protection by powdered filling ‘q’ Published By Publication Date Number of…
-
AS 1679.1:2005
Reusable all-glass or metal-and-glass syringes for medical use – Dimensions Published By Publication Date Number…
-
IEEE 1671.5-2008
IEEE Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via XML:Exchanging…
-
ISO 10725:2000
Acceptance sampling plans and procedures for the inspection of bulk materials Published By Publication Date…
-
AS 5079.2:2003 (R2014)
Filing cabinets – Vertical filing cabinets (ANSI BIFMA X5.3-1997, MOD) Published By Publication Date Number…
-
ISO 17925:2004
Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area…
-
ISO 17995:2005
Water quality — Detection and enumeration of thermotolerant Campylobacter species Published By Publication Date Number…
-
ISO 10695:2000
Water quality — Determination of selected organic nitrogen and phosphorus compounds — Gas chromatographic methods…
-
IEEE 1076.1-2007
IEEE Standard VHDL Analog and Mixed-Signal Extensions Published By Publication Date Number of Pages IEEE…
-
IEEE 1076.6 2004
IEEE Standard for VHDL Register Transfer Level (RTL) Synthesis Published By Publication Date Number of…
-
AS 1807.5:2000
Cleanrooms, workstations, safety cabinets and pharmaceutical isolators – Methods of test – Determination of work…
-
AS 1679.2:2005
Reusable all-glass or metal-and-glass syringes for medical use – Design, performance requirements and tests Published…
-
AS ISO 10993.5:2002
Biological evaluation of medical devices – Tests for in vitro cytotoxicity Published By Publication Date…
-
ISA 107.1-2013
Industry Standard File Format for Revolution-Based, Tip Timing Data Published By Publication Date Number of…
-
HB 207.5:2005
Environmental management – Integrating environmental aspects into design and development of electrotechnical products Published By…
-
IEEE 1076.6-2004
IEEE Standard for VHDL Register Transfer Level (RTL) Synthesis Published By Publication Date Number of…
-
AS/NZS 1359.5:2004
Rotating electrical machines – General requirements – Three-phase cage induction motors – High efficiency and…
-
IEEE 1076.6 2000
IEEE Standard for VHDL Register Transfer Level Synthesis Published By Publication Date Number of Pages…
-
ISO 16795:2004
Énergie nucléaire — Dosage de Gd2O3 dans des pastilles combustibles au gadolinium par spectrométrie à…
-
IEEE 1671.5 2008:2012 Edition
IEEE Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via…
-
AS 5079.3:2003 (R2014)
Filing cabinets – Mobile pedestals (ANSI BIFMA X5.5-1998, MOD) Published By Publication Date Number of…
-
IEEE 3079.3-2023
IEEE Standard for a Framework for Evaluating the Quality of Digital Humans (Approved Draft) Published…
-
AS 1049.1:2008
Telecommunication cables – Insulation, sheath and jacket – Materials Published By Publication Date Number of…
-
IEEE 3079.3-2023
IEEE Standard for a Framework for Evaluating the Quality of Digital Humans (Approved Draft) Published…
-
AS 4049.5:2007 (R2018)
Paints and related materials – Pavement marking materials – Performance assessment of pavement markings Published…
-
NZS 1170.5:2004
Structural design actions – Part 5: Earthquake actions – New Zealand Published By Publication Date…
-
IEEE 1671.5-2008
IEEE Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via XML:Exchanging…
-
AS 1049.2:2008
Telecommunication cables – Insulation, sheath and jacket – Test methods Published By Publication Date Number…
-
AS 2879.5:2004 (R2016)
Alumina – Determination of angle of flow Published By Publication Date Number of Pages AS…
-
AS ISO 11979.5:2003
Opthalmic implants – Intraocular lenses – Biocompatibility Published By Publication Date Number of Pages AS…
-
IEEE 1076.4 2001
IEEE Standard VITAL ASIC (Application Specific Integrated Circuit) Modeling Specification Published By Publication Date Number…
-
IEEE 1076.4-2000
IEEE Standard VITAL ASIC (Application Specific Integrated Circuit) Modeling Specification Published By Publication Date Number…
-
BS EN 12795:2003
Road transport and traffic telematics. Dedicated short range communication (DSRC). DSRC data link layer. Medium…
-
ISO 10775:2013
Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method Published…
-
ISO 10975:2009
Tracteurs et matériels agricoles — Systèmes d’autoguidage pour tracteurs commandés par opérateur et pour machines…
-
ISO 10985:2009
Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test…
-
AS/NZS 1359.5:2000
Rotating electrical machines – General requirements – Three-phase cage induction motors – High efficiency and…
