AS 1357.1:2004
$61.75
Valves primarily for use in heated water systems – Protection valves
| Published By | Publication Date | Number of Pages |
| AS | 2004-04-16 | 93 |
Sets out requirements for the design, construction, testing and performance of the following types of valves within the range of DN 15 to DN 50; a. Temperature-pressure relief valves; b. Expansion control valves; c. Non-return valves; d. Temperature relief valves; e. Combination high pressure expansion non-return valves.
Scope
This Standard sets out requirements for the design, construction, testing and performance of the following types of valves, within the range of DN 15 to DN 50:
(a) Temperature/pressure-relief valves.
(b) Expansion-control valves.
(c) Non-return valves.
(d) Temperature-relief valves.
(e) Combination high-pressure expansion non-return valves (HPNR).
The valves specified in this Standard are primarily intended for use in warm and hot water systems that are required to operate at—
(a) continuous operating temperatures not exceeding 85°C;
(b) temperatures under emergency conditions, not exceeding 99°C; and
(c) continuous working pressure not exceeding 1400 kPa.
NOTE: For valves used with water heaters, which are intended to operate at temperatures above 99°C (e.g. hot water boilers), see AS 1271.
Means for demonstrating compliance with this Standard are given in Appendix A.
Related products
-
AS/NZS 1359.5:2000
Rotating electrical machines – General requirements – Three-phase cage induction motors – High efficiency and…
-
AS 3572.1:2002
Plastics – Glass filament reinforced plastics (GRP) – Methods of test – Preparation of glass…
-
IEEE 1450.1-2005
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for Semiconductor…
-
AS/NZS 1859.1:2004
Reconstituted wood-based panels – Specifications – Particleboard Published By Publication Date Number of Pages AS…
-
AS 4457.1:2007
Earth-moving machinery – Off-the-road wheels, rims and tyres – Maintenance and repair – Wheel assemblies…
-
AS 1154.1:2009 (R2019)
Insulator and conductor fittings for overhead power lines – Performance, material, general requirements and dimensions…
-
ISO/TS 13571:2002
Life-threatening components of fire — Guidelines for the estimation of time available for escape using…
-
AS 1324.1:2001
Air filters for use in general ventilation and airconditioning – Application, performance and construction Published…
-
IEEE 1364.1-2002
IEEE Standard for Verilog Register Transfer Level Synthesis Published By Publication Date Number of Pages…
-
NZS 5257.1:2004
Gas industry audit protocol Published By Publication Date Number of Pages SNZ 2004-06-30 32
-
IEEE 1547.1 2005
IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems Published…
-
SAE AS 13572A:2014
Springs, Helical, Compression and Extension Published By Publication Date Number of Pages SAE 2014-08-12 17
-
AS 4350.1:2005
Heavy mineral sand concentrates – Physical testing – Size analysis Published By Publication Date Number…
-
AS 1807.1:2000
Cleanrooms, workstations, safety cabinets and pharmaceutical isolators – Methods of test Determination of air velocity…
-
ISEA Z358.1 2014
ANSI/ISEA Z358.1-2014: American National Standard for Emergency Eyewash and Shower Equipment Published By Publication Date…
-
IEEE 1363.1-2008
IEEE Standard Specification for Public Key Cryptographic Techniques Based on Hard Problems over Lattices Published…
-
AS/NZS 4357.3:2006
Structural laminated veneer lumber (LVL) – Determination of structural properties – Evaluation methods Published By…
-
AS 2337.1:2004 (R2016)
Gas cylinder test stations – General requirements, inspection and tests – Gas cylinders Published By…
-
AS/NZS 4157.1:2000
Information technology – Telecommunications and information exchange between systems – X.25 DTE conformance testing –…
-
IEEE 1597.1-2008
IEEE Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations Published By Publication Date…
-
AS/NZS 1337.0:2014
Personal eye protection – Part 0: Eye and face protection – Vocabulary Published By Publication…
-
AS 1357.2:2005 (R2015)
Valves primarily for use in heated water systems – Control valves Published By Publication Date…
-
IEEE 1597.1 2009
IEEE Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations Published By Publication Date…
-
AS/NZS 1359.5:2004
Rotating electrical machines – General requirements – Three-phase cage induction motors – High efficiency and…
-
AS 2327.1:2003
Composite structures – Simply supported beams Published By Publication Date Number of Pages AS 2003-08-18…
-
AS 1735.1:2003
Lifts, escalators and moving walks – General requirements Published By Publication Date Number of Pages…
-
IEEE 1394.1-2004
IEEE Standard for High Performance Serial Bus Bridges Published By Publication Date Number of Pages…
-
BS EN 13561:2004+A1:2008:2009 Edition
External blinds. Performance requirements including safety Published By Publication Date Number of Pages BSI 2009…
-
AS/NZS 1554.1:2014
Structural steel welding – Welding of steel structures Published By Publication Date Number of Pages…
-
AS/NZS 4357.1:2005 (R2016)
Structural laminated veneer lumber – Method of test for measurement of dimensions and shape Published…
-
BS EN 13571:2002:2004 Edition
Footwear. Test methods for uppers, lining and insocks. Tear strength Published By Publication Date Number…
-
AS ISO 13584.1:2004 (R2016)
Industrial automation systems and integration – Parts library – Overview and fundamental principles Published By…
-
IEEE 1597.1-2008
IEEE Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations Published By Publication Date…
-
AS 3571.1:2009
Plastics piping systems – Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin –…
-
AS/NZS 1167.1:2005
Welding and brazing – Filler metals – Filler metal for brazing and braze welding Published…
-
IEEE 1175.1 2003
IEEE Guide for CASE Tool Interconnections – Classification and Description Published By Publication Date Number…
-
AS 1237.1:2002 (R2015)
Plain washers for metric bolts, screws and nuts for general purposes – General plan Published…
-
IEEE 1450.1-2005
IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for Semiconductor…
-
AS 1627.1:2003 (R2017)
Metal finishing – Preparation and pretreatment of surfaces – Removal of oil, grease and related…
-
IEEE 1451.1 2000
IEEE Standard for a Smart Transducer Interface for Sensors and Actuators – Network Capable Application…
