AS 3500.4:1994
$57.20
National Plumbing and Drainage Code – Hot water supply systems
| Published By | Publication Date | Number of Pages |
| AS | 1994-09-19 | 100 |
Specifies uniform requirements for the installation of water heaters and hot water reticulation. Account has been taken of the current regulations of the water, gas and electricity supply authorities and local government bodies in each State and Territory of Australia.
Scope
This Standard sets out the requirements for the installation of piping and apparatus for single and multiple domestic-type water heaters, from and including the isolating valve on the cold water inlet and the reticulation of hot water. This Standard applies to the installation of the following types of water heaters which comply with Clause 4.2.1 or Clause 5.3.1:
(a) Electric storage water heaters with a rated delivery of up to 630 L per heater.
(b) Other types of storage water heaters with a capacity of up to 700 L per heater.
(c) Solar water heaters with a capacity of up to 700 L per heater.
(d) Heat exchange water heaters in accordance with AS 1361.
(e) Instantaneous water heaters.
(f) Other water heaters authorized by the relevant regulatory authority.
NOTE: The reference to AS 1361 in Item (d) is made to positively identify the particular type of heat exchange water heater to which this Standard applies.
This Standard applies to hot water systems using potable water only and does not apply to space heating or swimming pool heating.
Illustrations used in this Standard are diagrammatic only and have been chosen without prejudice.
1.2
Related products
-
AS/NZS 3905.4:1995
Quality system guidelines – Guide to quality system Standards AS/NZS ISO 9001:1994 and AS/NZS ISOā¦
-
AS 3564.4:1993
Automotive repairs – Terminology – Power steering Published By Publication Date Number of Pages ASā¦
-
ESDU 95004:1995
Vapour Pressures and Critical Points of Liquids: Glycol Ethers (Alkyl Cellosolves and Carbitols Etc.) Publishedā¦
-
Rul PL.17:2002
Rulings to plumbing and piping systems Standards – Installation (Ruling to AS 3500.4-1994) Published Byā¦
-
AS/NZS 3750.4:1994 (R2013)
Paints for steel structures – Bitumen paint Published By Publication Date Number of Pages ASā¦
-
Rul PL.10:2002
Rulings to plumbing and piping systems Standards – Minimum thickness for thermal insulation (Ruling toā¦
-
AS 3587.4:1998
Ferroalloys – Chemical analysis – Determination of carbon content – Infrared method Published By Publicationā¦
-
AS/NZS 3500.0:1995
National Plumbing and Drainage Code – Glossary of terms Published By Publication Date Number ofā¦
-
Rul PL.23:2002
Rulings to plumbing and piping systems Standards – Tundish drain lines (Ruling to AS 3500.4-1994)ā¦
-
ASTM-D5004 1999
D5004-89(1999) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement Publishedā¦
-
BS EN 150014:1997:1995 Edition
Harmonized system of quality assessment for electronic components. Blank detail specification: Thyristor diodes, transient overvoltageā¦
-
AS/NZS 2350.4:1999
Methods of testing portland and blended cements – Setting time of portland and blended cementsā¦
-
AS/NZS 4502.4:1997
Methods for evaluating clothing for protection against heat and fire – Evaluation of the behaviourā¦
-
ISO 15004:1997
Ophthalmic instruments ā Fundamental requirements and test methods Published By Publication Date Number of Pagesā¦
-
Rul PL.19:2002
Rulings to plumbing and piping systems Standards – Layout and size (Ruling to AS 3500.4-1994)ā¦
-
AS 3586.4:1995
Ferroalloys – Sampling – Determination of quality variation, precision and bias Published By Publication Dateā¦
-
Rul PL.25:2002
Rulings to plumbing and piping systems Standards – Table 4.1 (Ruling to AS 3500.4-1994) Publishedā¦
-
AS 3500.4.1:1997
National Plumbing and Drainage – Hot water supply systems – Performance requirements Published By Publicationā¦
-
Rul PL.21:2002
Rulings to plumbing and piping systems Standards – Size and material (Ruling to AS 3500.4-1994)ā¦
-
AS 3550.7:1993 (R2017)
Waters – The construction and use of the Secchi disc Published By Publication Date Numberā¦
-
AS 3500.1:1992
National Plumbing and Drainage Code – Water supply Published By Publication Date Number of Pagesā¦
-
Rul PL.16:2002
Rulings to plumbing and piping systems Standards – Sanitary fixtures delivery temperature (Ruling to ASā¦
-
AS 3730.4:1992
Guide to the properties of paints for buildings – Solvent-borne – Interior – Flat Publishedā¦
-
UNE-EN 50094/A1:1994:1995 Edition
Access control system for the mac/packet family: eurocrypt. Published By Publication Date Number of Pagesā¦
-
BS EN 45004:1995
General criteria for the operation of various types of bodies performing inspection Published By Publicationā¦
-
AS 1530.4:1997
Methods for fire tests on building materials, components and structures – Fire-resistance tests of elementsā¦
-
Rul PL.24:2002
Rulings to plumbing and piping systems Standards – Thermostatic mixing valves (Ruling to AS 3500.4-1994)ā¦
-
UNE-EN 150004:1991:1996 Edition
BDS: bipolar transistors for switching applications. Published By Publication Date Number of Pages AENOR 1996-11-01ā¦
-
BS 6200-3.40.4:1997
Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methodsā¦
-
AS 3550.4:1990
Waters – Determination of solids – Gravimetric method Published By Publication Date Number of Pagesā¦
-
AS 3583.4:1991 (R2016)
Methods of test for supplementary cementitious materials for use with portland cement – Determination ofā¦
-
BS EN 150004:1993:1976 Edition
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: bipolar transistorsā¦
-
AS 3830.4:1998
Ferroalloys – Specifications – Ferrosilicomanganese Published By Publication Date Number of Pages AS 1998-08-05 9
-
Rul PL.18:2002
Rulings to plumbing and piping systems Standards – Unconcealed storage water containers (Ruling to ASā¦
-
Rul PL.3:2002
Rulings to plumbing and piping systems Standards – Terminal fittings (Ruling to AS 3500.4-1994) Publishedā¦
-
AS 3508.4:1992
Printed board assemblies – Acceptability of printed boards and soldered joints – Pictorial representation Publishedā¦
-
AS 3904.4:1994
Quality management and quality system elements – Guidelines for quality improvement Published By Publication Dateā¦
-
Rul PL.22:2002
Rulings to plumbing and piping systems Standards – Size and material and installation (Ruling toā¦
-
AS 3558.4:1999 (R2016)
Methods of testing plastics and composite materials sanitary plumbing fixtures – Determination of resistance toā¦
-
AS 3550.3:1992
Waters – Determination of alkalinity – Acidimetric titration method Published By Publication Date Number ofā¦
