ASME B29.1 2011 R2016
$98.04
ASME B29.1 Precision Power Transmission Roller Chains, Attachments, and Sprockets
| Published By | Publication Date | Number of Pages |
| ASME | 2011 | 84 |
This Standard is a revision of the B29.1 portion of ASME B29.100-2002 and its establishment as a separate Standard. B29.1 Precision Power Transmission Roller Chains, Attachments and Sprockets: This Standard covers transmission roller chains, attachments, and sprockets. A roller chain is a series of alternately assembled roller links and pin links in which the pins articulate inside the bushings and the rollers are free to turn on the bushings. Pins and bushings are press fit in their respective link plates. Roller chains may be single-strand, having one row of roller links, or multiple strand, having more than one row of roller links. Tables are also provided for (a) General chain dimensions; (b) Maximum width over regular pin; (c) Dimensional limits for interchangeable chain links; (d) Straight- and bent-link plate extension dimensions; (e) Sprocket-tooth section profile dimensions of commercial and precision sprockets; (f) Extended pin dimensions; (g) Maximum eccentricity and face runout tolerances for commercial and precision sprockets; (h) Sprocket flange thickness; (i) Seating curve dimensions and tolerances; (j) Minus tolerances on caliper diameters of commercial and precision sprockets; (k) Pitch diameter, outside diameter and measuring dimension factor for chain of unity pitch; and (l) Whole depth of topping hob cut WD for each pitch and range. The Nonmandatory Appendices have been revised.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 5 | CONTENTS |
| 7 | FOREWORD |
| 9 | COMMITTEE ROSTER |
| 10 | CORRESPONDENCE WITH THE B29 COMMITTEE |
| 11 | 1 ROLLER CHAIN |
| 12 | 2 ATTACHMENTS |
| 13 | 3 SPROCKETS |
| 27 | Table 3 Dimensional Limits for Interchangeable Chain Links, in. |
| 28 | Table 3M Dimensional Limits for Interchangeable Chain Links, mm |
| 34 | Table 8 Maximum Eccentricity and Face Runout Tolerances for Commercial Sprockets ( Measured as Total Indicator Reading), in. Table 8M Maximum Eccentricity and Face Runout Tolerances for Commercial Sprockets ( Measured as Total Indicator Reading), mm Table 9 Maximum Eccentricity and Face Runout Tolerances for Precision Sprockets ( Measured as Total Indicator Reading), in. Table 9M Maximum Eccentricity and Face Runout Tolerances for Precision Sprockets ( Measured as Total Indicator Reading), mm |
| 35 | Table 10 Sprocket Flange Thickness, in. Table 10M Sprocket Flange Thickness, mm |
| 36 | Table 11 Seating Curve Dimensions and Tolerances, in. Table 11M Seating Curve Dimensions and Tolerances, mm |
| 37 | Table 12 Minus Tolerances on the Caliper Diameters of Commercial Sprockets for Various Numbers of Teeth, in. Table 12M Minus Tolerances on the Caliper Diameters of Commercial Sprockets for Various Numbers of Teeth, mm |
| 38 | Table 13 Minus Tolerances on the Caliper Diameters of Precision Sprockets for Various Numbers of Teeth, in. Table 13M Minus Tolerances on the Caliper Diameters of Precision Sprockets for Various Numbers of Teeth, mm |
| 39 | Table 14 Pitch Diameter, Outside Diameter, and Measuring Dimension Factor for Chain of Unity Pitch |
| 42 | Table 15 Whole Depth of Topping Hob Cut, WD, for Each Pitch and Range, in. |
| 43 | Table 15M Whole Depth of Topping Hob Cut, WD, for Each Pitch and Range, mm |
| 45 | NONMANDATORY APPENDICES NONMANDATORY APPENDIX A SUPPLEMENTARY INFORMATION ON CHAIN SELECTION1 A- 1 DESIGN FACTORS A- 2 SERVICE FACTORS A- 3 MULTIPLE STRAND FACTORS A- 4 LUBRICATION |
| 46 | A- 5 SPROCKETS A- 6 CENTER DISTANCE A- 7 ALIGNMENT A- 8 HORSEPOWER RATINGS TABLES |
| 47 | Table A- 1 Service Factors Table A- 2 Multiple- Strand Factors Table A- 3 Lubricant Viscosity |
| 48 | Table A- 4 Horsepower Ratings, Single Strand Roller Chain No. 25 ( 0.250 in. Pitch) |
| 49 | Table A- 5 Horsepower Ratings, Single Strand Roller Chain No. 35 ( 0.375 in. Pitch) |
| 50 | Table A- 6 Horsepower Ratings, Single Strand Roller Chain No. 40 ( 0.500 in. Pitch) |
| 51 | Table A- 7 Horsepower Ratings, Single Strand Roller Chain No. 41 ( 0.500 in. Pitch) |
| 52 | Table A- 8 Horsepower Ratings, Single Strand Roller Chain No. 50 ( 0.625 in. Pitch) |
| 53 | Table A- 9 Horsepower Ratings, Single Strand Roller Chain No. 60 ( 0.750 in. Pitch) |
| 54 | Table A- 10 Horsepower Ratings, Single Strand Roller Chain No. 60H ( 0.750 in. Pitch) |
| 55 | Table A- 11 Horsepower Ratings, Single Strand Roller Chain No. 80 ( 1.000 in. Pitch) |
| 56 | Table A- 12 Horsepower Ratings, Single Strand Roller Chain No. 80H ( 1.000 in. Pitch) |
| 57 | Table A- 13 Horsepower Ratings, Single Strand Roller Chain No. 100 ( 1.250 in. Pitch) |
| 58 | Table A- 14 Horsepower Ratings, Single Strand Roller Chain No. 100H ( 1.250 in. Pitch) |
| 59 | Table A- 15 Horsepower Ratings, Single Strand Roller Chain No. 120 ( 1.500 in. Pitch) |
| 60 | Table A- 16 Horsepower Ratings, Single Strand Roller Chain No. 120H ( 1.500 in. Pitch) |
| 61 | Table A- 17 Horsepower Ratings, Single Strand Roller Chain No. 140 ( 1.750 in. Pitch) |
| 62 | Table A- 18 Horsepower Ratings, Single Strand Roller Chain No. 140H ( 1.750 in. Pitch) |
| 63 | Table A- 19 Horsepower Ratings, Single Strand Roller Chain No. 160 ( 2.000 in. Pitch) |
| 64 | Table A- 20 Horsepower Ratings, Single Strand Roller Chain No. 160H ( 2.000 in. Pitch) |
| 65 | Table A- 21 Horsepower Ratings, Single Strand Roller Chain No. 180 ( 2.250 in. Pitch) |
| 66 | Table A- 22 Horsepower Ratings, Single Strand Roller Chain No. 180H ( 2.250 in. Pitch) |
| 67 | Table A- 23 Horsepower Ratings, Single Strand Roller Chain No. 200 ( 2.500 in. Pitch) |
| 68 | Table A- 24 Horsepower Ratings, Single Strand Roller Chain No. 200H ( 2.500 in. Pitch) |
| 69 | Table A- 25 Horsepower Ratings, Single Strand Roller Chain No. 240 ( 3.000 in. Pitch) |
| 70 | Table A- 26 Horsepower Ratings, Single Strand Roller Chain No. 240H ( 3.000 in. Pitch) |
| 71 | NONMANDATORY APPENDIX B SUPPLEMENTARY INFORMATION ON EQUATIONS FOR POWER RATINGS1 B- 1 TERMS AND DEFINITIONS B- 2 GRAPH OF POWER RATINGS B- 3 EQUATION FOR POWER LIMITED BY LINK PLATE FATIGUE B- 4 EQUATION FOR POWER LIMITED BY ROLLER– BUSHING IMPACT FATIGUE B- 5 EQUATIONS FOR POWER LIMITED BY GALLING BETWEEN PINS AND BUSHINGS B- 6 EQUATIONS FOR POWER LIMITED BY OIL BATH OR SLINGER DISC LUBRICATION |
| 72 | B- 7 EQUATIONS FOR POWER LIMITED BY MANUAL OR DRIP LUBRICATION |
| 74 | NONMANDATORY APPENDIX C SUPPLEMENTARY INFORMATION ON SPROCKET CUTTING TOOLS1 C- 1 STANDARD ROLLER CHAIN SPROCKET CUTTER DESIGNS C- 2 SPACE CUTTERS C- 3 HOBS C- 4 SHAPER CUTTERS |
| 78 | Table C- 2 Recommended Space Cutter Sizes for Roller Chain Sprockets, in. |
| 79 | Table C- 2M Recommended Space Cutter Sizes for Roller Chain Sprockets, mm |
| 80 | Table C- 3 Recommended Hob Sizes for Roller Chain Sprockets, in. Table C- 3M Recommended Hob Sizes for Roller Chain Sprockets, mm |
Related products
-
ASME B29.100 2011 R2016
ASME B29.100 Double-Pitch Roller Chains, Attachments, and Sprockets Published By Publication Date Number of Pages…
