ASTM-B177:2011 Edition
$40.63
B177/B177M-11 Standard Guide for Engineering Chromium Electroplating
| Published By | Publication Date | Number of Pages |
| ASTM | 2011 | 6 |
1.1 This guide provides information about the deposition of chromium on steel for engineering uses. This is sometimes called functional or hard chromium and is usually applied directly to the basis metal and is usually thicker than decorative deposits.
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3 This guide is not intended as a standardized procedure, but as a guide for obtaining smooth, adherent coatings of chromium of a desired thickness while retaining the required physical and mechanical properties of the base metals. Specified chromium electrodeposits on ferrous surfaces are defined in Specification B650 .
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents |
| 2 | Substrates Racks and Anodes |
| 3 | Cleaning Deoxidizing and Etching |
| 4 | Chromium Electroplating |
| 5 | Treatments of Chromium Coatings Repair of Chromium Electrodeposits on Steel Substrates Test Methods Keywords |
Related products
-
ASTM-B127:2009 Edition
B127-05(2009) Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip Published By Publication…
-
ASTM-C177:2019 Edition
C177-19 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means…
-
ASTM-B177/B177M:2021 Edition
B177/B177M-11(2021) Standard Guide for Engineering Chromium Electroplating Published By Publication Date Number of Pages ASTM…
-
ASTM-B107:2012 Edition
B107/B107M-12 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire Published By Publication…
-
ASTM-A177:1984 Edition
A177-84 Specification for High-Strength Stainless and Chromium-Nickel Steel Sheet and Strip Published By Publication Date…
-
ASTM-B174:2017 Edition
B174-17 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors Published By Publication Date Number…
-
ASTM-B167:2001 Edition
B167-01 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)*…
-
ASTM-B173:2010 Edition
B173-10 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors Published By…
-
ASTM-B177:2006 Edition
B177-01(2006)e1 Standard Guide for Engineering Chromium Electroplating Published By Publication Date Number of Pages ASTM…
-
ASTM-B177:1993 Edition
B177-93 Standard Guide for Engineering Chromium Electroplating Published By Publication Date Number of Pages ASTM…
-
ASTM-C177:2013 Edition
C177-13 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means…
-
ASTM-B173:2001 Edition
B173-01 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors Published By…
-
ASTM-B176:2017 Edition(Redline)
B176-17 Standard Specification for Copper-Alloy Die Castings (Redline) Published By Publication Date Number of Pages…
-
ASTM-B717:2023 Edition(Redline)
B717-23 Standard Specification for Refined Ruthenium (Redline) Published By Publication Date Number of Pages ASTM…
-
ASTM-B172:2015 Edition
B172-10(2015) Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors Published By…
-
ASTM-B172:2001 Edition
B172-01 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors Published By…
-
ASTM-B127:2005 Edition
B127-05 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip Published By Publication…
-
ASTM-B147:1972 Edition
B147-72 Specification for High-Strength Yellow Brass (Manganese Bronze) and Leaded High-Strength Yellow Brass (Leaded Manganese…
-
ASTM-B176:2014 Edition
B176-14 Standard Specification for Copper-Alloy Die Castings Published By Publication Date Number of Pages ASTM…
-
ASTM-C177:2010 Edition
C177-10 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means…
-
ASTM-B177:2001 Edition
B177-01 Standard Guide for Engineering Chromium Electroplating Published By Publication Date Number of Pages ASTM…
-
ASTM-E177:2020 Edition
E177-20 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods…
-
ASTM-B170:2010 Edition
B170-99(2010)e1 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes Published By Publication Date Number of Pages…
-
ASTM-B167:2023 Edition
B167-23 Standard Specification for Nickel-Chromium-Aluminum Alloys, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy…
-
ASTM-B177/B177M:2017 Edition
B177/B177M-11(2017) Standard Guide for Engineering Chromium Electroplating Published By Publication Date Number of Pages ASTM…
-
ASTM-B187:2003 Edition
B187/B187M-03 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar,…
-
ASTM-B173:2017 Edition
B173-17 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors Published By…
-
ASTM-B170:2024 Edition(Redline)
B170-24 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes (Redline) Published By Publication Date Number of…
-
ASTM-B187:2011 Edition(Redline)
B187/B187M-11 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar,…
-
ASTM-B173:2007 Edition
B173-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors Published By…
-
ASTM-B167:2023 Edition(Redline)
B167-23 Standard Specification for Nickel-Chromium-Aluminum Alloys, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy…
-
ASTM-B172:2017 Edition
B172-17 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors Published By…
-
ASTM-B167:2011 Edition
B167-11 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and…
-
ASTM-B177:2011 Edition(Redline)
B177/B177M-11 Standard Guide for Engineering Chromium Electroplating (Redline) Published By Publication Date Number of Pages…
-
ASTM-C177:2013 Edition(Redline)
C177-13 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means…
-
ASTM-B717:2006 Edition
B717-96(2006) Standard Specification for Refined Ruthenium Published By Publication Date Number of Pages ASTM 2006…
-
ASTM-B127:2009 Edition(Redline)
B127-05(2009) Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip (Redline) Published By…
-
ASTM-B117:1997 Edition
B117-97 Standard Practice for Operating Salt Spray (Fog) Apparatus Published By Publication Date Number of…
-
ASTM-G177:2008 Edition
G177-03(2008)e1 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface Published…
-
ASTM-B173:2015 Edition
B173-10(2015) Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors Published By…
