ASTM-D1037:2012 Edition(Redline)
$46.58
D1037-12 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials (Redline)
Published By | Publication Date | Number of Pages |
ASTM | 2012 | 39 |
Direct Screw Withdrawal | 16 |
---|---|
Significance and Use | 3 |
C177 | Steady-State Heat-Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus A |
Static Bending | 9 |
Falling Ball Impact | 21 |
Cupping and Twisting | 25 |
Tension Strength Parallel to Surface | 34 |
D1666 | Conducting Machining Tests of Wood and Wood-Base Materials C |
Compression Parallel to Surface | 12 |
C423 | Sound Absorption and Sound Absorption Coefficients by the Re- verberation Room Method A |
C384 | Impedance and Absorption of Acoustical Materials by the Imped- ance Tube Method A |
Hardness | 17 |
Tension Perpendicular to Surface | 11 |
Fastener Holding Tests: | |
Lateral Nail Resistance | 13 |
D150 | A-C Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials B |
Test Specimens | 5 |
Edgewise Shear | 27 |
E72 | Conducting Strength Tests of Panels for Building Construction D |
Water Absorption and Thickness Swelling | 36 |
C236 | Steady-State Thermal Performance of Building Assemblies by Means of the Guarded Hot Box A |
D1761 | Mechanical Fasteners in Wood C |
Moisture Content and Specific Gravity | 37 |
D149 | Dielectric Breakdown Voltage and Dielectric Strength of Solid Elec- trical Insulating Materials at Commercial Power Frequencies B |
Thickness | 32 |
E136 | Behavior of Materials in a Vertical Tube Furnace at 750 |
Shear in the Plane of the Panel | 19 |
Accelerated Aging | 7 |
E84 | Surface Burning Characteristics of Building Materials D |
Moisture Content and Conditioning Requirements | 6 |
Compression-Shear | 28 |
C209 | Cellulosic Fiber Insulating Board A |
Glue-Line Shear (Block Type) | 20 |
Nail-Head Pull-Through | 15 |
D257 | D-C Resistance or Conductance of Insulating Materials B |
D495 | High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation B |
E119 | Fire Tests of Building Construction and Materials D |
Apparatus | 4 |
E90 | Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions A |
Abrasion Resistance by the U.S. Navy Wear Tester | 22 |
E97 | Directional Reflectance Factor, 45-deg 0-deg, of Opaque Specimens by Broad-Band Filter Reflectometry E |
E96 | Water Vapor Transmission of Materials A |
Size, Physical Properties and Appearance of Panels | 8 |
Linear Expansion with Change in Moisture Content | 24 |
Interlaminar Shear | 26 |
Nail Withdrawal | 14 |
Modulus of Rupture | 33 |
Tension Strength Perpendicular to Surface | 35 |
Tension Parallel to Surface | 10 |
Hardness Modulus | 18 |
Moisture Tests: |