ASTM-D3632 2004

$40.63

D3632-98(2004) Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method

Published By	Publication Date	Number of Pages
ASTM	2004	8

Guaranteed Safe Checkout

Category: ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

ASTM D3632-98-Reapproved2004

Historical Standard: Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method

ASTM D3632

Scope

1.1 This test method describes how to estimate the relative resistance to deterioration of adhesive films and adhesive-bonded joints placed in a high-pressure oxygen environment. The instructions include both wood-to-wood and wood-to-metal joints as well as free film of adhesive. The effects of chemicals such as fire retardants, preservatives, or wood extractives, can be evaluated by using materials containing these chemicals for adherends.

1.2 This test method is primarily intended for elastomer-based construction adhesives, but is also applicable to other types of adhesives that may be susceptible to oxygen degradation. This accelerated test does not correlate exactly with the natural aging of the adhesive because of the varied conditions of natural aging and the absence of factors such as moisture and stress. The results of this accelerated test are only comparative and must be evaluated against the performance of bonded joints whose natural and accelerated aging characteristics are known.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords

accelerated aging; lapshear; oxygen pressure; shear strength

ICS Code

ICS Number Code n/a

DOI: 10.1520/D3632-98R04

PDF Catalog

PDF Pages	PDF Title
1	Scope Referenced Documents Terminology Summary of Test Method Significance and Use
2	Apparatus FIG. 1
3	Materials Sampling Test Specimens FIG. 2
4	FIG. 3 FIG. 4
5	Conditioning Specimens Adhesive Layer Thickness Measurement Tests of Unaged Specimens Procedure for Accelerated Aging FIG. 5 FIG. 6
6	Procedure Test of Aged Specimens Calculations (Tension Shear Test Specimens Only) Report Precision and Bias
7	Keywords A1. METHOD FOR DETERMINING SIGNIFICANT LOSS OF STRENGTH IN BONDED SPECIMENS EXPOSED OXYGEN-PRESSURE AGING A1.1 A1.2 Group Means A1.3 Difference of Aged Group Means from the Control Group Mean A1.4 Analysis of Variance TABLE A1.1
8	A1.5

Additional information

Standard Title	D3632-98(2004) Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
Published Code	ASTM
Publication Date	2004
Pages Count	8