ASTM-D4644 2008
$35.75
D4644-08 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
| Published By | Publication Date | Number of Pages |
| ASTM | 2008 | 4 |
1.1 This test method covers the determination of the slake durability index of a shale or other similar rock after two drying and wetting cycles with abrasion.
1.2 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D 6026 .
1.2.1 The method used to specify how data are collected, calculated, or recorded in this standard is not directly related to the accuracy to which the data can be applied in design or other uses, or both. How one applies the results obtained using this standard is beyond its scope.
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Significance and Use Apparatus |
| 2 | Test Sample and Specimen Procedure Calculations Report Precision and Bias FIG. 1 |
| 3 | Keywords REFERENCES FIG. 2 |
Related products
-
ASTM-D4684 2007
D4684-07e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils…
-
ASTM-D4643 2008
D4643-08 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven…
-
ASTM-D4444 2003
D4444-92(2003) Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters Published By Publication…
-
ASTM-D4645 2004
D4645-04e1 Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic…
-
ASTM-D4646 2003
D4646-03 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments…
-
ASTM-D4647 2006(Redline)
D4647-06e1 Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole…
-
ASTM-D4647 2006
D4647-93(2006) Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole…
-
ASTM-D4646 2008
D4646-03(2008) Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments…
-
ASTM-D4444 2008(Redline)
D4444-08 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters (Redline) Published…
-
ASTM-D4844 2003
D4844-03 Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection Published By…
-
ASTM-D444 2008
D444-88(2008) Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) Published…
-
ASTM-D4464 2000
D4464-00 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering…
-
ASTM-D6644 2002
D6644-01(2002) Standard Test Method for Tension Strength of Sew-Through Flange Buttons Published By Publication Date…
-
ASTM-D4694 2003
D4694-96(2003) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device Published By Publication…
-
ASTM-D4944 2004
D4944-04 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the…
-
ASTM-D4645 2008(Redline)
D4645-08 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method…
-
ASTM-D2644 2002
D2644-02 Standard Tolerances for Yarns Spun on the Woolen System Published By Publication Date Number…
-
ASTM-D3644 2006
D3644-06 Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins Published By Publication Date…
-
ASTM-D4544 2008
D4544-86(2008) Standard Practice for Estimating Peat Deposit Thickness Published By Publication Date Number of Pages…
-
ASTM-D5644 2008
D5644-01(2008)e1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled…
-
ASTM-D5644 2018
D5644-18 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate…
-
ASTM-D5644 2008
D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled…
-
ASTM-D4684 2007
D4684-07 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils…
-
ASTM-D4444 2008
D4444-08 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters Published By…
-
ASTM-D4644 2004
D4644-04 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks Published By…
-
ASTM-D4684 2002
D4684-02a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils…
-
ASTM-D4684 2008
D4684-08 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils…
-
ASTM-D4643 2008(Redline)
D4643-08 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven…
-
ASTM-D4654 2003
D4654-87(2003) Standard Test Method for Sulfate Basicity in Leather Published By Publication Date Number of…
-
ASTM-D4646 2008(Redline)
D4646-03(2008) Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments…
-
ASTM-D4642 2004
D4642-04 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry Published By Publication…
-
ASTM-D4044 2008
D4044-96(2008) Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for…
-
ASTM-D4674 2002
D4674-02 Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor…
-
ASTM-D4674 2002
D4674-02a Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office…
-
ASTM-D5644 2001
D5644-01 Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recylced Vulcanizate…
-
ASTM-D4645 2008
D4645-08 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method…
-
ASTM-D4684 2008(Redline)
D4684-08 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils…
-
ASTM-D4644 2008(Redline)
D4644-08 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks (Redline) Published…
-
ASTM-D4634 2004
D4634-04 Standard Specification for Styrene-Maleic Anhydride Materials (S/MA) Published By Publication Date Number of Pages…
-
ASTM-D3644 2004
D3644-98(2004) Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins Published By Publication Date…
