ASTM-D7607 2011
$35.75
D7607-11 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
| Published By | Publication Date | Number of Pages |
| ASTM | 2011 | 3 |
1.1 This test method is for the determination of oxygen (O 2 ) in gaseous fuels and fuel type gases. It is applicable to the measurement of oxygen in natural gas and other gaseous fuels. This method can be used to measure oxygen in helium, hydrogen, nitrogen, argon, carbon dioxide, mixed gases, process gases, and ambient air. The applicable range is 0.1 ppm(v) to 25% by volume.
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Summary of Test Method Significance and Use Interferences Apparatus |
| 2 | Hazards Preparation of Apparatus and Calibration Conditioning Procedure |
| 3 | Calculation or Interpretation of Results Precision and Bias Keywords TABLE 1 |
Related products
-
ASTM-D7605 2011
D7605-11 Standard Test Method for Thermoplastic Elastomers – Measurement of Polymer Melt Rheological Properties and…
-
ASTM-D7647 2010
D7647-10 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution…
-
ASTM-D7602 2017
D7602-11(2017) Standard Practice for Installation of Vulcanized Rubber Linings Published By Publication Date Number of…
-
ASTM-D7677 2011
D7677-11 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water…
-
ASTM-D7606 2011
D7606-11 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases…
-
ASTM-D4607 2014(Redline)
D4607-14 Standard Test Method for Determination of Iodine Number of Activated Carbon (Redline) Published By…
-
ASTM-D7647 2018
D7647-10(2018) Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution…
-
ASTM-D7637 2010
D7637-10 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate) Published…
-
ASTM-D5607 2016
D5607-16 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under…
-
ASTM-D7667 2015
D7667-10(2015) Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin…
-
ASTM-D7605 2011(Redline)
D7605-11 Standard Test Method for Thermoplastic Elastomers – Measurement of Polymer Melt Rheological Properties and…
-
ASTM-D7670 2021
D7670-10(2021) Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters…
-
ASTM-D7606 2017
D7606-17 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases…
-
ASTM-D7307 2011
D7307-06(2011) Standard Practice for Sampling of Thermoplastic Traffic Marking Materials Published By Publication Date Number…
-
ASTM-D6707 2011
D6707-06(2011) Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications Published By Publication…
-
ASTM-D7707 2021(Redline)
D7707-21 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust (Redline) Published By…
-
ASTM-D7608 2018
D7608-18 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear…
-
ASTM-D7707 2011
D7707-11 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust Published By Publication…
-
ASTM-D7307 2021
D7307-21 Standard Practice for Sampling of Thermoplastic Pavement Marking Materials Published By Publication Date Number…
-
ASTM-D7603 2013(Redline)
D7603-13 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils…
-
ASTM-D7602 2011
D7602-11 Standard Practice for Installation of Vulcanized Rubber Linings Published By Publication Date Number of…
-
ASTM-D7607 2011
D7607/D7607M-11e1 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method) Published…
-
ASTM-D7605 2016
D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic…
-
ASTM-D7608 2010
D7608-10 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear…
-
ASTM-D7687 2017(Redline)
D7687-17 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water…
-
ASTM-D6607 2021
D6607-21 Standard Practice for Inclusion of Precision Statement Variation in Specification Limits Published By Publication…
-
ASTM-D7507 2014
D7507-14 Standard Specification for Woven High Stretch Fabrics Used in Apparel Published By Publication Date…
-
ASTM-D7687 2011
D7687-11 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and…
-
ASTM-D7677 2016
D7677-16 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water…
-
ASTM-D7606 2017(Redline)
D7606-17 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases…
-
ASTM-D7637 2015
D7637-10(2015) Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate) Published…
-
ASTM-D7707 2021
D7707-21 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust Published By Publication…
-
ASTM-D4607 2021
D4607-14(2021) Standard Test Method for Determination of Iodine Number of Activated Carbon Published By Publication…
-
ASTM-D7687 2021(Redline)
D7687-21 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water…
-
ASTM-D7607/D7607M 2019(Redline)
D7607/D7607M-19 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method) (Redline)…
-
ASTM-D4607 2011
D4607-94(2011) Standard Test Method for Determination of Iodine Number of Activated Carbon Published By Publication…
-
ASTM-D7667 2010
D7667-10e2 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin…
-
ASTM-D7677 2016(Redline)
D7677-16 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water…
-
ASTM-D7007 2015
D7007-15 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or…
-
ASTM-D7607/D7607M 2019
D7607/D7607M-19 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method) Published…
