ASTM-E683 2007
$40.63
E683-91(2007) Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
| Published By | Publication Date | Number of Pages |
| ASTM | 2007 | 5 |
ASTM E683-91-Reapproved2007
Historical Standard: Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
ASTM E683
Scope
1.1 This practice covers solar space heating systems for one- and two-family dwellings. It sets forth acceptable installation and service practices to help ensure adequate performance, safety, and consumer satisfaction.
1.2 This practice is intended to describe acceptable practices for space heating systems in new and existing dwellings and shall not be construed as the optimization of good practices.
1.3 This practice does not apply to Rankine cycle, heat pump, or high pressure vapor systems.
1.4 This practice is not intended to abridge safety or health requirements. All systems shall be installed in accordance with local codes and ordinances.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (For specific safety precautions, see Section 6).
Keywords
residential solar space heating; solar energy; solar energy collectors; solar heating systems; solar space heating systems; space heating
ICS Code
ICS Number Code 27.160 (Solar energy engineering)
DOI: 10.1520/E0683-91R07
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology |
| 2 | Collector Subsystems Thermal Storage Devices |
| 3 | Controls and Safety Devices Piping, Ducting and Ancillary Equipment |
| 4 | Electric Wiring Auxiliary (Nonsolar) Space-Heating Equipment System Start-Up and Check-Out Procedures Service Practices Keywords |
Related products
-
ASTM-E673 2003
E673-03 Standard Terminology Relating to Surface Analysis Published By Publication Date Number of Pages ASTM…
-
ASTM-E2683 2009
E2683-09 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages Published By…
-
ASTM-E653 2003
E653-91(2003) Standard Test Method for Effectiveness of Aerosol and Pressurized Space Spray Insecticides Against Flying…
-
ASTM-E603 2017(Redline)
E603-17 Standard Guide for Room Fire Experiments (Redline) Published By Publication Date Number of Pages…
-
ASTM-E682 2000
E682-92(2000) Standard Practice for Liquid Chromatography Terms and Relationships Published By Publication Date Number of…
-
ASTM-E684 2004
E684-04 Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter…
-
ASTM-E673 2002
E673-02 Standard Terminology Relating to Surface Analysis Published By Publication Date Number of Pages ASTM…
-
ASTM-E683 2001
E683-91(2001) Standard Practice for Installation and Service of Solar Space Heating Systems for One- and…
-
ASTM-E693 2007
E693-01(2007) Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms…
-
ASTM-F683 2000
F683-00 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery Published…
-
ASTM-E680 2005
E680-79(2005) Standard Test Method for Drop Weight Impact Sensitivity Of Solid-Phase Hazardous Materials Published By…
-
ASTM-E684 2004(Redline)
E684-04 Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter…
-
ASTM-E633 2000
E633-00 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C)…
-
ASTM-E643 2009(Redline)
E643-09 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material (Redline) Published By…
-
ASTM-A683 2005
A683-05e1 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types Published By Publication Date Number of…
-
ASTM-E633 2005(Redline)
E633-00(2005) Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C)…
-
ASTM-A683 2005
A683-05 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types Published By Publication Date Number of…
-
ASTM-E2683 2017(Redline)
E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages (Redline) Published…
-
ASTM-E693 2017
E693-17 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms…
-
ASTM-B683 2006
B683-01(2006) Standard Specification for Pure Palladium Electrical Contact Material Published By Publication Date Number of…
-
ASTM-E883 2002
E883-02 Standard Guide for Reflected-Light Photomicrography Published By Publication Date Number of Pages ASTM 2002…
-
ASTM-E685 2000
E685-93(2000) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography Published By Publication…
-
ASTM-E689 2004
E689-95(2004)e1 Standard Reference Radiographs for Ductile Iron Castings Published By Publication Date Number of Pages…
-
ASTM-F683 2003
F683-03a Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery Published…
-
ASTM-E693 2001
E693-01 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms…
-
ASTM-E883 2007
E883-02(2007) Standard Guide for Reflected–Light Photomicrography Published By Publication Date Number of Pages ASTM 2007…
-
ASTM-E603 2017
E603-17 Standard Guide for Room Fire Experiments Published By Publication Date Number of Pages ASTM…
-
ASTM-E685 2005
E685-93(2005) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography Published By Publication…
-
ASTM-E693 2017(Redline)
E693-17 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms…
-
ASTM-F683 2002
F683-02 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery Published…
-
ASTM-E643 2009
E643-09 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material Published By Publication…
-
ASTM-E603 2006
E603-06 Standard Guide for Room Fire Experiments Published By Publication Date Number of Pages ASTM…
-
ASTM-E283 2004
E283-04 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls,…
-
ASTM-E603 2007
E603-07 Standard Guide for Room Fire Experiments Published By Publication Date Number of Pages ASTM…
-
ASTM-E983 2005
E983-05 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy Published By…
-
ASTM-E684 2000
E684-95(2000) Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter…
-
ASTM-E673 2003(Redline)
E673-03 Standard Terminology Relating to Surface Analysis (Redline) Published By Publication Date Number of Pages…
-
ASTM-E688 2006
E688-94(2006) Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing Published…
-
ASTM-E603 2004
E603-04 Standard Guide for Room Fire Experiments Published By Publication Date Number of Pages ASTM…
-
ASTM-E682 2006
E682-92(2006) Standard Practice for Liquid Chromatography Terms and Relationships Published By Publication Date Number of…
