ASTM-F467 1998
$40.63
F467-98 Standard Specification for Nonferrous Nuts for General Use
| Published By | Publication Date | Number of Pages |
| ASTM | 1998 | 9 |
1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general service applications.
1.2 Applicable bolts, cap screws, and studs for use with nuts covered by this specification are covered by Specification F 468.
Note 1A complete metric companion to Specification F 467 has been developedF 467M; therefore no metric equivalents are presented in this specification.
Related products
-
ASME NM.3.1 2022
ASME NM.3.1-2022 Nonmetallic Materials Part 1 – Thermoplastic Material Specifications Published By Publication Date Number…
-
ASTM-F487 1995
F487-88(1995)e1 Standard Specification for Fine Aluminum-1% Silicon Wire for Semiconductor Lead-Bonding Published By Publication Date…
-
ASME BPVC II B 2007
ASME BPVC – II – B -2007 BPVC Section II, Materials, Part B, Nonferrous Material…
-
ASTM-F464 1990
F464-76(1990) Test Methods for Fat in Meat and Meat Products by the Foss-Let Fat Analyzer…
-
ASTM-F437 1999
F437-99 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 Published…
-
ASTM-F466 1992
F466-79(1992) Test Method for Small-Signal Scattering Parameters of Low-Power Transistors in the 0.2 to 2.0…
-
ASTM-F667 1997
F667-97 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings Published By Publication Date…
-
AISC SteelConstructionManual 2023 16thEd
AISC Steel Construction Manual, 16th Edition Published By Publication Date Number of Pages AISC 2023
-
ASTM-F476 1996
F476-84(1996) Standard Test Methods for Security of Swinging Door Assemblies Published By Publication Date Number…
-
ASTM-F467M 1998
F467M-98 Standard Specification for Nonferrous Nuts for General Use [Metric] Published By Publication Date Number…
-
IEEE 802.1Q-2018(Redline)
IEEE Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks (Redline) Published By Publication…
-
ASTM-E1823:2011 Edition(Redline)
E1823-11 Standard Terminology Relating to Fatigue and Fracture Testing (Redline) Published By Publication Date Number…
-
IEEE 802.1Q-2018(Redline)
IEEE Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks (Redline) Published By Publication…
-
ASTM-F465 1981
F465-76(1981) Recommended Practice for Developing Precision and Accuracy Data on ASTM Method for the Analysis…
-
ASTM-F967 1995
F967-95 Standard Practice for Security Engineering Symbols Published By Publication Date Number of Pages ASTM…
-
ASTM-F427 1990
F427-77(1990)e1 Recommended Practice for Sampling Meat to Determine Percent Composition in a Lot Published By…
-
ASTM-F477 1999
F477-99 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe Published By Publication Date…
-
ASME BPVC CC BPV Edtn 2007
ASME BPVC CODE CASES: Boilers and Pressure Vessels-2007 Published By Publication Date Number of Pages…
-
ASTM-F2261:2006 Edition
F2261-06 Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40…
-
IEEE 802.1Q-2018
IEEE Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks (Superseded Redline) Published By…
-
IEEE 802.1Q-2018
IEEE Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks (Superseded Redline) Published By…
-
ASME BPVC II B 2015
ASME BPVC – II – B -2015 BPVC Section II, Materials, Part B, Nonferrous Material…
-
NFPA 58: LP-Gas Code Handbook 2014
NFPA 58: LP-Gas Code Handbook Published By Publication Date Number of Pages NFPA 2014 624
-
ASTM-F367 1991
F367-81(1991) Specification for Holes and Slots for Inch Cortical Bone Screws (Withdrawn 1997) Published By…
-
ASTM-F462 1999
F462-79(1999) Consumer Safety Specification for Slip-Resistant Bathing Facilities Published By Publication Date Number of Pages…
-
ICC StructuralHandbook 2009.pdf
2009 IBC Handbook: Structural Provisions Published By Publication Date Number of Pages ICC 2009 702
-
ASTM-F463 1990
F463-76(1990) Test Method for Fat in Meat and Meat Products by Ether Extraction (Withdrawn 1995)…
-
ASTM-F1467:1999 Edition
F1467-99 Standard Guide for Use of an X-Ray Tester ([approximate]10 keV Photons) in Ionizing Radiation…
-
NFPA 58: LP-Gas Code Handbook 2014
NFPA 58: LP-Gas Code Handbook Published By Publication Date Number of Pages NFPA 2014 624
-
ASTM-F417:1996 Edition
F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001) Published…
-
ASME BPVC II B 2010
ASME BPVC – II – B -2010 BPVC Section II, Materials, Part B, Nonferrous Material…
-
ASME NM.3.1 2020
ASME NM.3.1 – 2020: Nonmetallic Materials, Part 1–Thermoplastic Material Specifications Published By Publication Date Number…
-
ASTM-A467 1998
A467/A467M-98 Standard Specification for Machine and Coil Chain Published By Publication Date Number of Pages…
-
ASTM-F47 1994
F47-94 Test Method for Crystalographic Perfection of Silicon by Preferential Etch Techniques (Withdrawn 1998) Published…
-
ASTM-F468 1998
F468-98 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use Published…
-
ASTM-F2261:2011 Edition
F2261-06(2011) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40…
-
ASTM-F457 1999
F457-94(1999) Standard Test Method for Speed and Distance Calibration of a Fifth Wheel Equipped With…
-
NFPA Hdbk 58 2014
NFPA 58: LP-Gas Code Handbook Published By Publication Date Number of Pages NFPA 2014 624
-
ASME BPVC CC BPV 2010
ASME BPVC CODE CASES: Boilers and Pressure Vessels-2010 Published By Publication Date Number of Pages…
-
ASTM-F469 1978
F469-78 Practice for Assessment of Compatibility of Nonporous Polymeric Materials for Surgical Implants with Regard…
