BS EN 13739-2:2011:2013 Edition
$167.15
Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection – Test methods
Published By | Publication Date | Number of Pages |
BSI | 2013 | 38 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This European Standard specifies methods to test mounted, trailed and self-propelled broadcasters and full width solid fertilizer distributors used in agriculture and horticulture.
This European Standard does not apply to machines which are:
-
combined grain and fertilizer drills; or
-
equipment for distributing granulated pesticides; or
-
solid fertilizer line-distributors (which are dealt with in EN 13740-1:2003 and in EN 13740-2:2003).
If the term ‘machine’ is used it covers both full width distributors and broadcasters, except in the case of definitions in Part 1.
Two different methods are described in this European Standard to carry out the evaluation test: a transverse test and a rotating test. The rotating test is mainly adapted to centrifugal spreaders.
Status | Under Review |
---|---|
Title | Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection – Test methods |
Corrects | BS EN 13739-2:2011 |
Replaces | BS EN 13739-2:2003 |
Publisher | BSI |
Committee | AGE/32 |
Pages | 38 |
Publication Date | 2013-05-31 |
ISBN | 978 0 580 79142 0 |
Standard Number | BS EN 13739-2:2011 |
Identical National Standard Of | EN 13739-2:2011/AC:2012 |
Descriptors | Trailers, Fertilizer distributors, Pollution, Agricultural equipment, Agricultural trailers, Horticultural equipment, Performance testing, Environmental engineering, Fertilizers, Mechanically-operated devices, Crop protection |
ICS Codes | 65.060.25 - Equipment for storage, preparation and distribution of fertilizers |
Related products
-
BSI 21/30414994 DC:2021 Edition
BS EN 17549-2. Building information modelling – Information structure based on EN ISO 16739 1…
-
BS EN ISO 23739:2023
Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of zirconium oxide powders…
-
BS EN 13639:2017
Determination of total organic carbon in limestone Published By Publication Date Number of Pages BSI…
-
BS EN 1373:2015
Adhesives. Test method for adhesives for floor and wall coverings. Shear test Published By Publication…
-
BS EN 13139:2013
Aggregates for mortar Published By Publication Date Number of Pages BSI 2013 44
-
BS EN 13719:2016
Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers…
-
BS EN 13639:2002:2004 Edition
Determination of total organic carbon in limestone Published By Publication Date Number of Pages BSI…
-
BS EN 13732:2013
Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene Published…
-
BS EN 13799:2002:2007 Edition
Contents gauges for LPG tanks Published By Publication Date Number of Pages BSI 2007 28
-
BS EN 13789:2010
Industrial valves. Cast iron globe valves Published By Publication Date Number of Pages BSI 2010…
-
BS EN 13749:2011
Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames Published…
-
BS EN 13039:2011
Soil improvers and growing media. Determination of organic matter content and ash Published By Publication…
-
BS EN 13732:2002+A2:2009
Food processing machinery. Bulk milk coolers on farms Requirements for construction, performance, suitability for use,…
-
BS EN 13739-1:2003
Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection – Requirements Published By…
-
BS EN ISO 13769:2009
Gas cylinders. Stamp marking Published By Publication Date Number of Pages BSI 2009 30
-
BS EN ISO 13789:2017
Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method Published By Publication…
-
BS EN ISO 11296-4:2018+A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks – Lining with…
-
BS EN 13779:2007:2014 Edition
Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems Published By Publication Date…
-
BS EN ISO 13736:2008:2009 Edition
Determination of flash point. Abel closed-cup method Published By Publication Date Number of Pages BSI…
-
BS EN 13759:2012
Furniture. Operating mechanisms for seating and sofa-beds. Test methods Published By Publication Date Number of…
-
BS EN ISO 13736:2021
Determination of flash point. Abel closed-cup method Published By Publication Date Number of Pages BSI…
-
BS EN 13749:2021
Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames Published…
-
BS EN ISO 16092-1:2018:2020 Edition
Machine tools safety. Presses – General safety requirements Published By Publication Date Number of Pages…
-
BS EN ISO 13736:2013
Determination of flash point. Abel closed-cup method Published By Publication Date Number of Pages BSI…
-
BS EN 13739-2:2003
Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection – Test methods Published…
-
BS EN 13739-1:2011
Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection – Requirements Published By…
-
BS EN 13749:2021+A1:2023
Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames Published…
-
BS EN ISO 18739:2016
Dentistry. Vocabulary of process chain for CAD/CAM systems Published By Publication Date Number of Pages…
-
BS EN 13139:2002:2004 Edition
Aggregates for mortar Published By Publication Date Number of Pages BSI 2004 38
-
BS EN ISO 13736:2021+A1:2022
Determination of flash point. Abel closed-cup method Published By Publication Date Number of Pages BSI…
-
BSI DD ENV 13759:2001
Domestic furniture. Seating. Test method for the determination of the durability of reclining and/or tilting…
-
BS EN ISO 13734:2001
Natural gas. Organic sulfur compounds used as odorants. Requirements and test methods Published By Publication…
-
BS EN 13799:2012
LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels Published By…
-
BS EN ISO 4259-1:2017+A2:2020:2021 Edition
Petroleum and related products. Precision of measurement methods and results – Determination of precision data…
-
BS EN ISO 19739:2005:2010 Edition
Natural gas. Determination of sulfur compounds using gas chromatography Published By Publication Date Number of…
-
BS EN 13379:2001+A1:2013
Pasta processing plants. Spreader, stripping and cutting machine, stick return conveyor, stick magazine. Safety and…
-
BS EN ISO 13789:2007:2008 Edition
Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method Published By Publication…
-
BS EN ISO 13734:2013
Natural gas. Organic components used as odorants. Requirements and test methods Published By Publication Date…
-
BS EN ISO 13769:2018
Gas cylinders. Stamp marking Published By Publication Date Number of Pages BSI 2018 28
-
BS EN ISO 16092-1:2018
Machine tools safety. Presses – General safety requirements Published By Publication Date Number of Pages…