BS EN 4199-003:2014
$86.31
Aerospace series. Bonding straps for aircraft – Bonding strap assemblies with flat braided conductor copper, tin plated – 65°C up to 150°C and copper, nickel plated – 65°C up to 260°C. Product standard
Published By | Publication Date | Number of Pages |
BSI | 2014 | 14 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This European Standard defines the characteristics of bonding straps with flat braided copper conductors tin or nickel plated and terminal lugs tin or nickel plated, crimped on both ends for use on aircraft. This standard shall be used together with EN 4199-001.
PDF Catalog
PDF Pages | PDF Title |
---|---|
4 | Contents Page |
5 | Foreword |
6 | 1 Scope 2 Normative references 3 Terms and definitions 4 Characteristics 4.1 Temperature rating 4.2 Material and finish 4.3 Length restrictions |
7 | 4.4 Cross sectional area Table 1 — Cross sectional area 5 Dimensions, mass and resistance 5.1 General Figure 1 |
8 | 5.2 Length 5.3 Terminal selection |
9 | Table 2 — Terminal selection 5.4 Mass and resistance Table 3 — Mass and resistance |
10 | 6 Quality assurance 6.1 Qualification 6.2 Acceptance Tests 7 Designation 8 Marking |
11 | 9 Packaging |
Status | Definitive |
---|---|
Pages | 14 |
Publication Date | 2014-05-31 |
ISBN | 978 0 580 83459 2 |
Standard Number | BS EN 4199-003:2014 |
Title | Aerospace series. Bonding straps for aircraft – Bonding strap assemblies with flat braided conductor copper, tin plated – 65°C up to 150°C and copper, nickel plated – 65°C up to 260°C. Product standard |
Identical National Standard Of | EN 4199-003:2014 |
Replaces | BS EN 4199-003:2009 |
Descriptors | Straps, Temperature, Bonding, Marking, Electrical connections, Dimensions, Electric conductors, Metal coatings, Tin, Designations, Flat (shape), Aircraft components, Copper, Nickel, Braided conductors |
Publisher | BSI |
Committee | ACE/6 |
ICS Codes | 49.060 - Aerospace electric equipment and systems |
Related products
-
BS EN 4124:2004
Aerospace series. Shank nuts, self-locking, heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on…
-
BS EN 4119:2003
Aerospace series. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated…
-
BS EN ISO 11403-2:2004
Plastics. Acquisition and presentation of comparable multipoint data – Thermal and processing properties Published By…
-
BS EN ISO 11816-2:2003
Milk and milk products. Determination of alkaline phosphatase activity using a fluorimetric method – Fluorometric…
-
BS EN 60745-2-4:2009+A11:2011:2012 Edition
Hand-held motor-operated electric tools. Safety – Particular requirements for sanders and polishers other than disk…
-
BS EN 4199-001:2013
Aerospace series. Bonding straps for aircraft – Technical specification Published By Publication Date Number of…
-
BS EN 4199-004:2009
Aerospace series. Bonding straps for aircraft – Round bonding straps, copper, tin plated -65 °C…
-
BS EN 50288-4-1:2003:2004 Edition
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened…
-
BS EN 3724:2003
Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001 MoS2…
-
BS EN 61753-1-3:2014:2015 Edition
Fibre optic interconnecting devices and passive components. Performance standard – General and guidance for single-mode…
-
BS EN ISO 4499-4:2016
Hardmetals. Metallographic determination of microstructure – Characterisation of porosity, carbon defects and eta-phase content Published…
-
BS EN 4199-003:2014
Aerospace series. Bonding straps for aircraft – Bonding strap assemblies with flat braided conductor copper,…
-
BS EN 16825:2016+A1:2019
Refrigerated storage cabinets and counters for professional use. Classification, requirements and test conditions Published By…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
-
BS EN 60034-14:2004:2007 Edition
Rotating electrical machines – Mechanical vibration of certain machines with shaft heights 56 mm and…
-
BS EN 60745-2-4:2003+A1:2009:2010 Edition
Hand-held motor-operated electric tools. Safety – Particular requirements for sanders and polishers other than disk…
-
BS EN 60745-2-1:2010
Hand-held motor-operated electric tools. Safety – Particular requirements for drills and impact drills Published By…
-
BS EN IEC 61753-071-02:2020+A1:2024
Fibre optic interconnecting devices and passive components. Performance standard – Non-connectorized single-mode fibre optic 1…
-
BS EN 4199-003:2014
Aerospace series. Bonding straps for aircraft – Bonding strap assemblies with flat braided conductor copper,…
-
BS EN ISO 9080:2003
Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in…
-
BS EN 13302:2010
Bitumen and bituminous binders. Determination of dynamic viscosity of bituminous binder using a rotating spindle…
-
BS EN 13976-2:2003:2005 Edition
Rescue systems. Transportation of incubators – System requirements Published By Publication Date Number of Pages…
-
BS EN 50288-5-1:2013:2014 Edition
Multi-element metallic cables used in analogue and digital communication and control – Sectional specification for…
-
BS EN 81-70:2003
Safety rules for the construction and installation of lifts – Particular applications for passenger and…
-
BS EN 62841-2-4:2014:2016 Edition
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety – Particular requirements…
-
BS EN 4199-001:2006
Aerospace series. Bonding straps for aircraft – Technical specification Published By Publication Date Number of…
-
BS EN 4119:2004
Aerospace series. Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated…
-
BS EN ISO 26203-1:2010
Metallic materials. Tensile testing at high strain rates – Elastic-bar-type systems Published By Publication Date…
-
BS EN 4199-004:2014
Aerospace series. Bonding straps for aircraft – Round bonding straps, copper, tin plated -65°C up…
-
BS EN 1469:2004:2005 Edition
Natural stone products. Slabs for cladding. Requirements Published By Publication Date Number of Pages BSI…
-
BS EN 50288-5-1:2013:2014 Edition
Multi-element metallic cables used in analogue and digital communication and control – Sectional specification for…
-
BS EN 55022:2006+A2:2010:2011 Edition
Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement Published By Publication Date…
-
BS 4999-103:1987
General requirements for rotating electrical machines – Specification for symbols Published By Publication Date Number…
-
BS EN 60745-2-1:2003+A12:2009:2010 Edition
Hand-held motor-operated electric tools. Safety – Particular requirements for drills and impact drills Published By…
-
BS EN ISO 3745:2003 2004
Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for…
-
BS EN 62087:2009 2010
Methods of measurement for the power consumption of audio, video and related equipment Published By…
-
BS EN 14035-34:2003:2006 Edition
Fireworks – Table bombs. Specification and test methods Published By Publication Date Number of Pages…
-
BSI PD 7974-3:2011
Application of fire safety engineering principles to the design of buildings – Structural response and…
-
BS EN 4199-003:2009
Aerospace series. Bonding straps for aircraft – Bonding strap assemblies with flat braided conductor copper,…
-
BS EN 62053-21:2003+A1:2017:2018 Edition
Electricity metering equipment (a.c.). Particular requirements – Static meters for active energy (classes 1 and…