BS L 171:1990
$86.31
Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
| Published By | Publication Date | Number of Pages |
| BSI | 1990 | 8 |
This British Standard specifies the chemical composition, heat treatment, mechanical properties and the inspection and testing procedures applicable to forgings of aluminium-zinc-magnesium-manganese-copper alloy supplied in the as-forged or annealed condition for use in the solution treated and overaged condition (see note 1 to the table).
Chemical composition, heat treatment, mechanical properties and inspection and testing procedures.
Related products
-
BS EN 2100:1992
Aluminium alloy AL-P2014A-T4511. Extruded bars and sections a or D ≤ 200 mm Published By…
-
BS L 174:1991
Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an…
-
BS 5440-1:2008
Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st,…
-
BS 6068-2.37:1990
Water quality. Physical, chemical and biochemical methods – Method for the determination of chloride via…
-
BS 4839-3:1992
Plastics containers – Specification for closed head plastics drums over 70 L up to and…
-
BS EN 62020:1999:2006 Edition
Electrical accessories. Residual current monitors for household and similar uses (RCMs) Published By Publication Date…
-
BS EN 840-3:1997
Mobile waste containers – Containers with four wheels with a capacity from 770 l to…
-
NA to BS EN 1991-2:2003:2008 Edition
UK National Annex to Eurocode 1. Actions on structures – Traffic loads on bridges Published…
-
BS ISO 6916-1:1995:2007 Edition
Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification – Sheeting Published By…
-
BSI PAS 43:2008
Safe Working of Vehicle Breakdown, Recovery and Removal Operations. Management System Specification Published By Publication…
-
BS 5975:2008+A1:2011
Code of practice for temporary works procedures and the permissible stress design of falsework Published…
-
BSI PAS 9980:2022
Fire risk appraisal of external wall construction and cladding of existing blocks of flats. Code…
-
BSI PD 6687-2:2008
Recommendations for the design of structures to BS EN 1992-2:2005 Published By Publication Date Number…
-
BS L 160:1976
Specification. Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an…
-
BS 9000-3:1987
General requirements for a system for electronic components of assessed quality – Specification for national…
-
BS G 198-5:1997:2005 Edition
Sleeves and moulded components for aircraft electric cables and equipment wires – Specification for heat…
-
BS L 156:1978
Specification for sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature)…
-
BS L 102:1971
Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room…
-
BS EN 840-4:2004
Mobile waste containers – Containers with 4 wheels with capacity up to 1 700 l…
-
BS L 170:1989:1990 Edition
Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially…
-
BS EN ISO 7083:2021 – TC
Tracked Changes. Technical product documentation. Symbols used in technical product documentation. Proportions and dimensions Published…
-
BS EN 61221:2004
Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications Published By…
-
BS 6700:2006+A1:2009
Design, installation, testing and maintenance of services supplying water for domestic use within buildings and…
-
BS EN ISO 4037-1:2021
Radiological protection. X and gamma reference radiation for calibrating dosemeters and doserate meters and for…
-
BS 5975:2019 – TC
Tracked Changes. Code of practice for temporary works procedures and the permissible stress design of…
-
BS L 157:1978
Specification for sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4,…
-
BS 7181:1989:1990 Edition
Specification for storage cisterns up to 500 L actual capacity for water supply for domestic…
-
BSI PD 6695-1-9:2008
Recommendations for the design of structures to BS EN 1993-1-9 Published By Publication Date Number…
-
IEEE 802.16-2009
IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Broadband Wireless…
-
BS CECC 00114-6:1994
Rule of procedure 14. Quality assessment procedures – Technology approval of electronic component manufacturers Published…
-
BS EN 2326:1992
Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D ≤ 200 mm Published By…
-
BS 8476:2007
Code of practice for the safe use of concrete pumps Published By Publication Date Number…
-
BS EN 60068-2-68:1996
Environmental testing. Test methods – Test L. Dust and sand Published By Publication Date Number…
-
BS 6618:1985
Specification for photographic grade potassium sulphite, 650 g/L aqueous solution Published By Publication Date Number…
-
BS 5975:2019
Code of practice for temporary works procedures and the permissible stress design of falsework Published…
-
BS L 111:1971
Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable…
-
BS ISO 5507:2002
Oilseeds, vegetable oils and fats. Nomenclature Published By Publication Date Number of Pages BSI 2002…
-
BS EN 840-2:1997
Mobile waste containers – Containers with four wheels with a capacity from 500 l to…
-
BS L 173:1991
Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an…
-
BS L 172:1989:1990 Edition
Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings…
