The intent of this standard is to allow a person with physical disability to independently get to, enter, and use a site, facility, building or element. The specifications in the standard makes sites, facilities, buildings and elements accessible to and usable by people with such disabilities as the inability to walk, difficulty walking, reliance on walking aids, blindness and visual impairment, deafness and hearing impairment, incoordination, reaching and manipulation disabilities, lack of stamina, difficulty in interpreting and reacting to sensory information, and extremes in physical size. This updated edition of the standard continues the tradition of aligning provisions with ADAAG and Fair Housing Design Guidelines, but it also provides greater accessibility for the evolving disabled communities and new elements of a building design. The standard includes: For new buildings and additions, enhanced dimensions for the clear floor space, turning space and the accessible route. This will affect the space provided at elements and will increase the maneuverability within such spaces for users of powered wheelchairs and scooters. Provisions incorporating many of the latest criteria for public rights of way provisions for curb cuts, blended transitions, detectable warnings, diagonal parking and street parking (PROWAG). New provision to improve safety for an accessible route traversing a parking lot. New provisions to facilitate charging of powered wheelchairs where they will be parked for duration, such as in accessible hotel rooms and at some wheelchair seating in assembly spaces. New provisions addressing accessibility at electric vehicle charging stations New provisions for water bottle filling stations. New provisions that address spaces for sign language interpreter stations and sign language video booths. A new section addressing classroom acoustics that aims to improve acoustics in the rooms and to reduce the intrusion of noises from outside the classroom, thereby enhancing the learning environment. This standard is intended for adoption by government agencies and by organizations setting model codes to achieve uniformity in the technical design criteria in building codes and other regulations.

PDF Catalog

PDF Pages	PDF Title
1	ICC A117.1-2017 STANDARD FOR ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES
2	ICC A117.1-2017 STANDARD FOR ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES AMERICAN NATIONAL STANDARD TITLE PAGE
3	COPYRIGHT
4	AMERICAN NATIONAL STANDARD
6	FOREWORD
8	ACCREDITED STANDARDS COMMITTEE A117 ON ARCHITECTURAL FEATURES AND SITE DESIGN OF PUBLIC BUILDINGS AND RESIDENTIAL STRUCTURES FOR PERSONS WITH DISABILITIES
12	TABLE OF CONTENTS
14	LIST OF FIGURES
22	CHAPTER 1 APPLICATION AND ADMINISTRATION SECTION 101 TITLE SECTION 102 PURPOSE SECTION 103 HUMAN FACTOR PROVISIONS SECTION 104 COMPLIANCE ALTERNATIVES SECTION 105 CONVENTIONS SECTION 106 REFERENCED DOCUMENTS
23	FIGURE 105.4 GRAPHIC CONVENTION FOR FIGURES
24	SECTION 107 DEFINITIONS
28	CHAPTER 2 SCOPING SECTION 201 GENERAL SECTION 202 DWELLING AND SLEEPING UNITS SECTION 203 ADMINISTRATION
30	CHAPTER 3 BUILDING BLOCKS SECTION 301 GENERAL SECTION 302 FLOOR SURFACES FIGURE 302.2 CARPET ON FLOOR SURFACES FIGURE 302.3 OPENINGS IN FLOOR SURFACES SECTION 303 CHANGES IN LEVEL FIGURE 303.2 VERTICAL CHANGE IN LEVEL FIGURE 303.3 BEVELED CHANGES IN LEVEL
31	SECTION 304 TURNING SPACE FIGURE 304.3.1.1 CIRCULAR TURNING SPACE – NEW BUILDINGS SIZE AND OVERLAP FIGURE 304.3.1.2 CIRCULAR TURNING SPACE – EXISTING BUILDINGS – SIZE AND OVERLAP FIGURE 304.3.2.1(A) T-SHAPED TURNING SPACE NEW BUILDINGS – OPTION 1
32	FIGURE 304.3.2.1(B) T-SHAPED TURNING SPACE NEW BUILDINGS – OPTION 2 FIGURE 304.3.2.1(C) T-SHAPED TURNING SPACE NEW BUILDINGS – OPTION 3 FIGURE 304.3.2.1.1 T-SHAPED TURNING SPACE NEW BUILDINGS – OVERLAP
33	FIGURE 304.3.2.2 T-SHAPED TURNING SPACE NEW BUILDINGS – SIZE AND OVERLAP FIGURE 304.3.2.2.1 T-SHAPED TURNING SPACE – EXISTING BUILDINGS OVERLAP SECTION 305 CLEAR FLOOR SPACE FIGURE 305.3.1 SIZE OF CLEAR FLOOR SPACE – NEW BUILDINGS FIGURE 305.3.2 SIZE OF CLEAR FLOOR SPACE – EXISTING BUILDINGS
34	FIGURE 305.5(A) POSITION OF CLEAR FLOOR SPACE – FORWARD FIGURE 305.5(B) POSITION OF CLEAR FLOOR SPACE – PARALLEL FIGURE 305.7.1 MANEUVERING CLEARANCE IN AN ALCOVE PARALLEL APPROACH FIGURE 305.7.2 MANEUVERING CLEARANCE IN AN ALCOVE FORWARD APPROACH SECTION 306 KNEE AND TOE CLEARANCE
35	FIGURE 306.2(A) TOE CLEARANCE – ELEVATION FIGURE 306.2(B) TOE CLEARANCE – PLAN FIGURE 306.3(A) KNEE CLEARANCE – ELEVATION FIGURE 306.3(B) KNEE CLEARANCE – PLAN
36	SECTION 307 PROTRUDING OBJECTS FIGURE 307.2 LIMITS OF PROTRUDING OBJECTS FIGURE 307.3(A) POST-MOUNTED PROTRUDING OBJECTS FIGURE 307.3(B) POST-MOUNTED PROTRUDING OBJECTS
37	FIGURE 307.4 REDUCED VERTICAL CLEARANCE SECTION 308 REACH RANGES FIGURE 308.2.1 UNOBSTRUCTED FORWARD REACH FIGURE 308.2.2 OBSTRUCTED HIGH FORWARD REACH
38	FIGURE 308.3.1 UNOBSTRUCTED SIDE REACH FIGURE 308.3.2(A) OBSTRUCTED HIGH SIDE REACH FIGURE 308.3.2(B) OBSTRUCTED HIGH SIDE REACH SECTION 309 OPERABLE PARTS
39	FIGURE 309.1 OPERABLE PARTS – EXCEPTION 3
40	CHAPTER 4 ACCESSIBLE ROUTES SECTION 401 GENERAL SECTION 402 ACCESSIBLE ROUTES SECTION 403 WALKING SURFACES FIGURE 403.5.1(A) CLEAR WIDTH OF AN ACCESSIBLE ROUTE – NEW BUILDINGS – INTERIOR
41	FIGURE 403.5.1(B) CLEAR WIDTH OF AN ACCESSIBLE ROUTE – NEW BUILDINGS – EXTERIOR FIGURE 403.5.1(C) CLEAR WIDTH OF AN ACCESSIBLE ROUTE – EXISTING BUILDINGS – INTERIOR FIGURE 403.5.1(D) CLEAR WIDTH OF AN ACCESSIBLE ROUTE – EXISTING BUILDINGS – EXTERIOR
42	FIGURE 403.5.2.1(A) CLEAR WIDTH AT 180-DEGREE TURN NEW BUILDINGS – OPTION 1 FIGURE 403.5.2.1(B) CLEAR WIDTH AT 180-DEGREE TURN NEW BUILDINGS – OPTION 2 FIGURE 403.5.2.1(C) CLEAR WIDTH AT 180-DEGREE TURN NEW BUILDINGS – OPTION 3
43	FIGURE 403.5.2.2(A) CLEAR WIDTH AT 180-DEGREE TURN EXISTING BUILDINGS FIGURE 403.5.2.2(B) CLEAR WIDTH AT 180-DEGREE TURN EXISTING BUILDINGS – EXCEPTION FIGURE 403.5.3.1(A) CLEAR WIDTH AT 90-DEGREE TURN NEW BUILDINGS – OPTION 1
44	FIGURE 403.5.3.1(B) CLEAR WIDTH AT 90-DEGREE TURN NEW BUILDINGS – OPTION 2 FIGURE 403.5.3.1(C) CLEAR WIDTH AT 90-DEGREE TURN NEW BUILDINGS – OPTION 3 FIGURE 403.5.3.1(D) CLEAR WIDTH AT 90-DEGREE TURN NEW BUILDINGS – OPTION 4 FIGURE 403.5.3.2 CLEAR WIDTH AT 90-DEGREE TURN EXISTING BUILDINGS
45	FIGURE 403.5.4.1(A) PASSING SPACE – NEW BUILDINGS – 60 X 60 OPTION FIGURE 403.5.4.1(B) PASSING SPACE – NEW BUILDINGS – T-TURN OPTION
46	FIGURE 403.5.4.2(A) PASSING SPACE – EXISTING BUILDINGS – 60 X 60 OPTION FIGURE 403.5.4.2(B) PASSING SPACE – EXISTING BUILDINGS – T-TURN OPTION SECTION 404 DOORS, DOORWAYS AND GATES
47	FIGURE 404.2.2(A) CLEAR WIDTH OF DOORWAYS – HINGED DOOR FIGURE 404.2.2(B) CLEAR WIDTH OF DOORWAYS – SLIDING DOOR FIGURE 404.2.2(C) CLEAR WIDTH OF DOORWAYS – FOLDING DOOR FIGURE 404.2.2(D) CLEAR WIDTH OF DOORWAYS – DOORWAYS WITHIN DOORS FIGURE 404.2.3.2(A) MANEUVERING CLEARANCE AT MANUAL SWINGING DOORS FRONT APPROACH – PULL SIDE FIGURE 404.2.3.2(B) MANEUVERING CLEARANCE AT MANUAL SWINGING DOORS FRONT APPROACH – PUSH SIDE – NEW BUILDINGS FIGURE 404.2.3.2(C) MANEUVERING CLEARANCE AT MANUAL SWINGING DOORS FRONT APPROACH – PUSH SIDE – EXISTING BUILDINGS FOOTNOTE 5
48	FIGURE 404.2.3.2(D) MANEUVERING CLEARANCE AT MANUAL SWINGING DOORS HINGE APPROACH – PULL SIDE FIGURE 404.2.3.2(E) MANEUVERING CLEARANCE AT MANUAL SWINGING DOORS HINGE APPROACH – PULL SIDE FIGURE 404.2.3.2(F) MANEUVERING CLEARANCE AT MANUAL SWINGING DOORS HINGE APPROACH – PUSH SIDE FIGURE 404.2.3.2(G) MANEUVERING CLEARANCE AT MANUAL SWINGING DOORS LATCH APPROACH – PULL SIDE FIGURE 404.2.3.2(H) MANEUVERING CLEARANCE AT MANUAL SWINGING DOORS LATCH APPROACH – PUSH SIDE
49	TABLE 404.2.3.2—MANEUVERING CLEARANCES AT MANUAL SWINGING DOORS AND GATES TABLE 404.2.3.3—MANEUVERING CLEARANCES AT SLIDING AND FOLDING DOORS FIGURE 404.2.3.3(A) MANEUVERING CLEARANCES AT SLIDING AND FOLDING DOORS – FRONT APPROACH – NEW BUILDINGS FIGURE 404.2.3.3(B) MANEUVERING CLEARANCES AT SLIDING AND FOLDING DOORS – FRONT APPROACH – EXISTING BUILDINGS FOOTNOTE 2 FIGURE 404.2.3.3(C) MANEUVERING CLEARANCES AT SLIDING AND FOLDING DOORS – POCKET OR HINGE APPROACH FIGURE 404.2.3.3(D) MANEUVERING CLEARANCES AT SLIDING AND FOLDING DOORS – STOP OR LATCH APPROACH
50	TABLE 404.2.3.4—MANEUVERING CLEARANCES FOR DOORWAYS WITHOUT DOORS OR GATES FIGURE 404.2.3.4(A) MANEUVERING CLEARANCES FOR DOORWAYS WITHOUT DOORS OR GATES – FRONT APPROACH – NEW BUILDINGS FIGURE 404.2.3.4(B) MANEUVERING CLEARANCES FOR DOORWAYS WITHOUT DOORS OR GATES – FRONT APPROACH – EXISTING BUILDINGS – FOOTNOTE 1 FIGURE 404.2.3.4(C) MANEUVERING CLEARANCES FOR DOORWAYS WITHOUT DOORS OR GATES – SIDE APPROACH FIGURE 404.2.3.5(A) RECESSED DOORS AND GATES – NEW BUILDINGS PULL SIDE FIGURE 404.2.3.5(B) RECESSED DOORS AND GATES – NEW BUILDINGS PUSH SIDE FIGURE 404.2.3.5(C) RECESSED DOORS AND GATES – NEW BUILDINGS PUSH SIDE – DOOR PROVIDED WITH BOTH CLOSER AND LATCH
51	FIGURE 404.2.3.5(D) RECESSED DOORS AND GATES – EXISTING BUILDINGS PULL SIDE FIGURE 404.2.3.5(E) RECESSED DOORS AND GATES – EXISTING BUILDINGS PUSH SIDE FIGURE 404.2.3.5(F) RECESSED DOORS AND GATES – EXISTING BUILDINGS PUSH SIDE – DOOR PROVIDED WITH BOTH CLOSER AND LATCH FIGURE 404.2.5(A) TWO DOORS OR GATES IN A SERIES – NEW BUILDINGS FIGURE 404.2.5(B) TWO DOORS OR GATES IN A SERIES – NEW BUILDINGS
52	FIGURE 404.2.5(C) TWO DOORS OR GATES IN A SERIES – NEW BUILDINGS FIGURE 404.2.5(D) TWO DOORS OR GATES IN A SERIES – EXISTING BUILDINGS FIGURE 404.2.5(E) TWO DOORS OR GATES IN A SERIES – EXISTING BUILDINGS FIGURE 404.2.5(F) TWO DOORS OR GATES IN A SERIES – EXISTING BUILDINGS
54	SECTION 405 RAMPS TABLE 405.2—ALLOWABLE RAMP DIMENSIONS FOR CONSTRUCTION IN EXISTING SITES, BUILDINGS AND FACILITIES FIGURE 405.7 RAMP LANDINGS
55	FIGURE 405.9 EDGE PROTECTION – LIMITED DROP OFF – EXCEPTION 3
56	FIGURE 405.9.1 EXTENDED FLOOR SURFACE FIGURE 405.9.2.1 CURB FIGURE 405.9.2.2 BARRIER SECTION 406 CURB RAMPS AND BLENDED TRANSITIONS
57	FIGURE 406.2(A) PERPENDICULAR CURB RAMP FIGURE 406.2(B) PERPENDICULAR CURB RAMP
58	FIGURE 406.3(A) PARALLEL CURB RAMP FIGURE 406.3(B) PARALLEL CURB RAMP
59	FIGURE 406.4 BLENDED TRANSITION
60	FIGURE 406.5.2 GRADE BREAK FIGURE 406.5.4 COUNTER SLOPE OF SURFACES ADJACENT TO CURB RAMPS
61	FIGURE 406.5.5 CLEAR SPACE AT BOTTOM OF CURB RAMPS AND BLENDED TRANSITIONS SECTION 407 ELEVATORS
62	FIGURE 407.2.1.1 HEIGHT OF ELEVATOR CALL BUTTONS FIGURE 407.2.1.7 DESTINATION-ORIENTED ELEVATOR INDICATION
63	FIGURE 407.2.2.2(A) ELEVATOR VISIBLE SIGNALS HEIGHT OF SIGNALS FIGURE 407.2.2.2(B) ELEVATOR VISIBLE SIGNALS SIZE OF SIGNALS FIGURE 407.2.3.1 FLOOR DESIGNATION
64	FIGURE 407.2.3.2 DESTINATION-ORIENTED ELEVATOR CAR IDENTIFICATION FIGURE 407.4.1(A) INSIDE DIMENSIONS OF ELEVATOR CARS – CENTERED DOOR LOCATION
65	FIGURE 407.4.1(B) INSIDE DIMENSIONS OF ELEVATOR CARS SIDE (OFF-CENTERED DOOR) LOCATION FIGURE 407.4.1(C) INSIDE DIMENSIONS OF ELEVATOR CARS ANY DOOR LOCATION FIGURE 407.4.1(D) INSIDE DIMENSIONS OF ELEVATOR CARS ANY DOOR LOCATION FIGURE 407.4.1(E) INSIDE DIMENSIONS OF ELEVATOR CARS EXISTING CAR CONFIGURATION TABLE 407.4.1—MINIMUM DIMENSIONS OF ELEVATOR CARS
66	FIGURE 407.4.6.2 ELEVATOR CAR CONTROL BUTTONS
67	TABLE 407.4.7.1.4 – CONTROL BUTTON IDENTIFICATION
68	SECTION 408 LIMITED-USE/LIMITED-APPLICATION ELEVATORS
69	FIGURE 408.3.3(A) DOOR LOCATION FOR LIMITED USE/LIMITED (LULA) ELEVATORS – CAR WITH SINGLE DOOR FIGURE 408.3.3(B) DOOR LOCATION FOR LIMITED USE/LIMITED APPLICATION (LULA) ELEVATORS – CAR WITH DOORS ON OPPOSITE SI FIGURE 408.3.3(C) DOOR LOCATION FOR LIMITED USE/LIMITED APPLICATION (LULA) ELEVATORS – CAR WITH DOORS ON ADJACENT SIDES
70	FIGURE 408.3.3(D) DOOR LOCATION FOR LIMITED USE/LIMITED APPLICATION (LULA) ELEVATORS – CAR WITH DOORS ON ADJACENT SIDES – EXCEPTION FIGURE 408.4.1(A) INSIDE DIMENSIONS OF LIMITED USE/LIMITED APPLICATION (LULA) ELEVATOR CARS – NEW BUILDINGS FIGURE 408.4.1(B) INSIDE DIMENSIONS OF LIMITED USE/LIMITED APPLICATION (LULA) ELEVATOR CARS EXISTING BUILDINGS – EXCEPTION 1
71	FIGURE 408.4.1(C) INSIDE DIMENSIONS OF LIMITED USE/LIMITED APPLICATION (LULA) ELEVATOR CARS EXISTING BUILDINGS – EXCEPTION 2 SECTION 409 PRIVATE RESIDENCE ELEVATORS FIGURE 409.4.1(A) PRIVATE RESIDENCE ELEVATORS NEW BUILDINGS – CAR SIZE
72	FIGURE 409.4.1(B) PRIVATE RESIDENCE ELEVATORS EXISTING BUILDINGS – CAR SIZE FIGURE 409.4.6.3 LOCATION OF CONTROLS IN PRIVATE RESIDENCE ELEVATORS SECTION 410 PLATFORM LIFTS
73	FIGURE 410.2.1(A) PLATFORM LIFT DOORS AND GATES – PLATFORM LIFT WITH DOOR AT ONE END OR AT OPPOSITE ENDS FIGURE 410.2.1 (B)PLATFORM LIFT DOORS AND GATES PLATFORM WITH DOORS ON ADJACENT SIDES FIGURE 410.5.1.1 PLATFORM LIFTS – SIZE WITH SINGLE DOOR OR DOORS ON OPPOSITE ENDS – NEW BUILDINGS FIGURE 410.5.1.2 PLATFORM LIFTS – SIZE WITH SINGLE DOOR OR DOORS ON OPPOSITE ENDS – EXISTING BUILDINGS
74	FIGURE 410.5.2.1 PLATFORM LIFTS – SIZE WITH DOORS ON ADJACENT SIDES NEW BUILDINGS FIGURE 410.5.2.2 PLATFORM LIFTS – SIZE WITH DOORS ON ADJACENT SIDES EXISTING BUILDINGS
76	CHAPTER 5 GENERAL SITE AND BUILDING ELEMENTS SECTION 501 GENERAL SECTION 502 PARKING SPACES FIGURE 502.2(A) VEHICLE PARKING SPACE SIZE FIGURE 502.2(B) VAN PARKING SPACE SIZE EXCEPTION
77	FIGURE 502.4 PARKING SPACE ACCESS AISLE
78	FIGURE 502.9.1 WIDE SIDEWALKS
79	FIGURE 502.9.1.2 NARROW SIDEWALKS FIGURE 502.9.2 PERPENDICULAR OR ANGLED PARKING SPACE
80	SECTION 503 PASSENGER LOADING ZONES FIGURE 503.3(A) PASSENGER LOADING ZONE ACCESS AISLE – NEW BUILDINGS
81	FIGURE 503.3(B) PASSENGER LOADING ZONE ACCESS AISLE – EXISTING BUILDINGS SECTION 504 STAIRWAYS FIGURE 504.2 TREADS AND RISERS FOR STAIRWAYS
82	FIGURE 504.5(A) STAIR NOSINGS – VERTICAL RISER – CURVE OR BEVEL AT LEADING EDGE FIGURE 504.5(B) STAIR NOSINGS – VERTICAL RISER CURVED NOSING FIGURE 504.5(C) STAIR NOSINGS – VERTICAL RISER BEVELED NOSING FIGURE 504.5(D) STAIR NOSINGS – VERTICAL RISER ANGLED RISER
83	SECTION 505 HANDRAILS FIGURE 505.4(A) HANDRAIL HEIGHT – STAIRS FIGURE 505.4(B) HANDRAIL HEIGHT – RAMPS FIGURE 505.5 HANDRAIL CLEARANCE
84	FIGURE 505.7(A) HANDRAIL CROSS SECTION – CIRCULAR FIGURE 505.7(B) HANDRAIL CROSS SECTION – NONCIRCULAR FIGURE 505.7(C) HANDRAIL CROSS SECTION – NONCIRCULAR
85	FIGURE 505.10.1 TOP AND BOTTOM HANDRAIL EXTENSION AT RAMPS FIGURE 505.10.2 TOP HANDRAIL EXTENSION AT STAIRS FIGURE 505.10.3 BOTTOM HANDRAIL EXTENSION AT STAIRS
86	SECTION 506 WINDOWS SECTION 507 ACCESSIBLE ROUTES THROUGH PARKING
88	CHAPTER 6 PLUMBING ELEMENTS AND FACILITIES SECTION 601 GENERAL SECTION 602 DRINKING FOUNTAINS AND BOTTLE FILLING STATIONS FIGURE 602.2.1(A) CLEAR FLOOR SPACE AT WHEELCHAIR DRINKING FOUNTAINS FIGURE 602.2.1(B) CLEAR FLOOR SPACE AT WHEELCHAIR DRINKING FOUNTAINS – PRIMARILY FOR CHILDREN’S USE EXCEPTION FIGURE 602.2.3 WHEELCHAIR DRINKING FOUNTAIN SPOUT HEIGHT AND LOCATION
89	FIGURE 602.2.4 WHEELCHAIR DRINKING FOUNTAIN SPOUT LOCATION FIGURE 602.3.2 STANDING USE DRINKING FOUNTAIN SPOUT HEIGHT AND LOCATION FIGURE 602.3.3 STANDING USE DRINKING FOUNTAIN SPOUT LOCATION SECTION 603 TOILET AND BATHING ROOMS
90	TABLE 603.6 MAXIMUM REACH DEPTH AND HEIGHT SECTION 604 WATER CLOSETS AND TOILET COMP FIGURE 604.2 WATER CLOSET LOCATION
91	FIGURE 604.3 SIZE OF CLEARANCE FOR WATER CLOSET FIGURE 604.4 WATER CLOSET SEAT HEIGHT
92	FIGURE 604.5.1 SIDE-WALL GRAB BAR FOR WATER CLOSET FIGURE 604.5.2 REAR-WALL GRAB BAR FOR WATER CLOSET
93	FIGURE 604.7.1(A) DISPENSER OUTLET LOCATION – PROTRUDING DISPENSER BELOW GRAB BAR FIGURE 604.7.1(B) DISPENSER OUTLET LOCATION PROTRUDING DISPENSER ABOVE GRAB BAR FIGURE 604.7.1(C) DISPENSER OUTLET LOCATION RECESSED DISPENSER
94	FIGURE 604.7.1(D) DISPENSER OUTLET LOCATION DISPENSER IN FRONT OF WATER CLOSET – EXCEPTION FIGURE 604.9.2(A) WHEELCHAIR TOILET COMPARTMENTS WALL HUNG CLOSET, ADULT FIGURE 604.9.2(B) WHEELCHAIR TOILET COMPARTMENTS FLOOR MOUNTED WATER CLOSET, ADULT – WALL HUNG AND FLOOR MOUNTED WATER CLOSET, CHILDREN
95	FIGURE 604.9.2.3 WHEELCHAIR TOILET COMPARTMENTS ALTERNATE WHEELCHAIR TOILET COMPARTMENT FIGURE 604.9.3(A) WHEELCHAIR TOILET COMPARTMENT DOORS DOOR SWINGING INTO THE WHEELCHAIR TOILET COMPARTMENT
96	FIGURE 604.9.3(B) WHEELCHAIR TOILET COMPARTMENT DOORS EXCEPTION 3 – ALTERNATE WHEELCHAIR COMPARTMENT FIGURE 604.9.3.1(A) WHEELCHAIR TOILET COMPARTMENT DOOR OPENING LOCATION – DOOR SWINGING IN ON FRONT WALL OF PARTITION FIGURE 604.9.3.1(B) WHEELCHAIR TOILET COMPARTMENT DOOR OPENING LOCATION DOOR SWINGING IN ON SIDE WALL OF PARTITIONS
97	TABLE 604.9.3.1—DOOR OPENING LOCATION FIGURE 604.9.5(A) TOE CLEARANCE – ELEVATION FIGURE 604.9.5(B) TOE CLEARANCE – PLAN
98	FIGURE 604.10.1 AMBULATORY COMPARTMENT FIGURE 604.11.2 CHILDREN’S WATER CLOSET LOCATION FIGURE 604.11.4 CHILDREN’S WATER CLOSET HEIGHT
99	FIGURE 604.11.7(A) CHILDREN’S DISPENSER OUTLET – LOCATION FIGURE 604.11.7(B) CHILDREN’S DISPENSER OUTLET – EXCEPTION SECTION 605 URINALS FIGURE 605.2(A) HEIGHT AND DEPTH OF URINAL WALL HUNG TYPE
100	FIGURE 605.2(B) HEIGHT AND DEPTH OF URINAL STALL TYPE SECTION 606 LAVATORIES AND SINKS FIGURE 606.3 HEIGHT OF LAVATORIES AND SINKS
101	SECTION 607 BATHTUBS FIGURE 607.2(A) CLEARANCE FOR BATHTUBS WITH REMOVABLE IN TUB SEATS FIGURE 607.2(B) CLEARANCE FOR BATHTUBS WITH SEAT AT HEAD END OF TUB
102	FIGURE 607.4.1(A) GRAB BARS FOR BATHTUBS WITH SEAT AT HEAD END OF TUB – ELEVATION FIGURE 607.4.1(B) GRAB BARS FOR BATHTUBS WITH SEAT AT HEAD END OF TUB – PLAN FIGURE 607.4.2(A) GRAB BARS FOR BATHTUBS WITH REMOVABLE SEATS – ELEVATION
103	FIGURE 607.4.2(B) GRAB BARS FOR BATHTUBS WITH REMOVABLE SEATS – PLAN FIGURE 607.5 LOCATION OF BATHTUB CONTROLS SECTION 608 SHOWER COMPARTMENTS FIGURE 608.2.1.1 TRANSFER-TYPE SHOWER COMPARTMENT SIZE
104	FIGURE 608.2.1.2(A) TRANSFER-TYPE SHOWER COMPARTMENT CLEARANCES NEW BUILDINGS – OPTION 1 FIGURE 608.2.1.2(B) TRANSFER-TYPE SHOWER COMPARTMENT CLEARANCES NEW BUILDINGS – OPTION 2 FIGURE 608.2.1.2(C) TRANSFER-TYPE SHOWER COMPARTMENT CLEARANCES EXISTING BUILDINGS FIGURE 608.2.2.1 STANDARD ROLL-IN-TYPE SHOWER COMPARTMENT SIZE
105	FIGURE 608.2.2.2 STANDARD ROLL-IN-TYPE SHOWER COMPARTMENT CLEARANCE FIGURE 608.2.3.1 ALTERNATE ROLL-IN-TYPE SHOWER COMPARTMENT SIZE
106	FIGURE 608.3.1(A) GRAB BARS IN TRANSFER-TYPE SHOWER – ELEVATION FIGURE 608.3.1(B) GRAB BARS IN TRANSFER-TYPE SHOWER – PLAN FIGURE 608.3.2(A) GRAB BARS IN STANDARD ROLL-IN-TYPE SHOWER ELEVATION FIGURE 608.3.2(B) GRAB BARS IN STANDARD ROLL-IN-TYPE SHOWER PLAN
107	FIGURE 608.3.3(A) GRAB BARS IN ALTERNATE ROLL-IN-TYPE SHOWER – ELEVATION FIGURE 608.3.3(B) GRAB BARS IN ALTERNATE ROLL-IN-TYPE SHOWER – PLAN FIGURE 608.4.1 TRANSFER-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION FIGURE 608.4.2 STANDARD ROLL-IN-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION
108	FIGURE 608.4.3(A) ALTERNATE ROLL-IN-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION – END WALL – ELEVATION FIGURE 608.4.3(B) ALTERNATE ROLL-IN-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION – CONTROL WALL – ELEVATION SECTION 609 GRAB BARS
109	FIGURE 609.2 SIZE OF GRAB BARS FIGURE 609.3 SPACING OF GRAB BARS FIGURE 609.4.2(A) POSITIONS OF CHILDREN’S GRAB BARS SIDE-WALL VIEW
110	FIGURE 609.4.2(B) POSITIONS OF CHILDREN’S GRAB BARS REAR-WALL VIEW SECTION 610 SEATS FIGURE 610.2(A) BATHTUB SEATS REMOVABLE IN-TUB SEATS FIGURE 610.2(B) BATHTUB SEATS SEAT PROVIDED AT HEAD END OF TUB
111	FIGURE 610.3.1 RECTANGULAR SHOWER COMPARTMENT SEATS FIGURE 610.3.2 L-SHAPED SHOWER COMPARTMENT SEATS SECTION 611 WASHING MACHINES AND CLOTHES DRYERS
112	FIGURE 611.2(A) CLEAR FLOOR SPACE – TOP LOADING FIGURE 611.2(B) CLEAR FLOOR SPACE – FRONT LOADING FIGURE 611.4(A) HEIGHT OF LAUNDRY EQUIPMENT – TOP LOADING FIGURE 611.4(B) HEIGHT OF LAUNDRY EQUIPMENT – FRONT LOADING
113	SECTION 612 SAUNAS AND STEAM ROOMS
114	CHAPTER 7 COMMUNICATION ELEMENTS AND FEATURES SECTION 701 GENERAL SECTION 702 ALARMS SECTION 703 SIGNS
115	TABLE 703.2.4—VISUAL CHARACTER HEIGHT FIGURE 703.3.5 CHARACTER HEIGHT
116	FIGURE 703.3.10 HEIGHT OF RAISED CHARACTERS ABOVE FLOOR FIGURE 703.3.11 LOCATION OF SIGNS AT DOORS
117	FIGURE 703.4.3 BRAILLE MEASUREMENT TABLE 703.4.3— BRAILLE DIMENSIONS
118	FIGURE 703.4.4 POSITION OF BRAILLE FIGURE 703.4.5 HEIGHT OF BRAILLE CHARACTERS ABOVE FLOOR
119	FIGURE 703.5 PICTOGRAM FIELD FIGURE 703.6.3.1 INTERNATIONAL SYMBOL FOR ACCESSIBILITY FIGURE 703.6.3.2 INTERNATIONAL TTY SYMBOL FIGURE 703.6.3.3 INTERNATIONAL SYMBOL OF ACCESS FOR HEARING LOSS FIGURE 703.6.3.4 VOLUME-CONTROLLED TELEPHONE
120	TABLE 703.7.4—LOW RESOLUTION VMS CHARACTER HEIGHT TABLE 703.7.5 PIXEL COUNT FOR LOW RESOLUTION VMS SIGNAGE 1
121	FIGURE 703.7.5 LOW RESOLUTION VMS SIGNAGE CHARACTERS SECTION 704 TELEPHONES
122	FIGURE 704.2.1.1 CLEAR FLOOR SPACE FOR TELEPHONES PARALLEL APPROACH FIGURE 704.2.1.2 CLEAR FLOOR SPACE FOR TELEPHONES FORWARD APPROACH SECTION 705 DETECTABLE WARNING SURFACES
123	FIGURE 705.5(A) TRUNCATED DOME SIZE AND SPACING FIGURE 705.5(B) ELEVATION (ENLARGED) FIGURE 705.6(A) EXTENT OF DETECTABLE WARNINGS – PERPENDICULAR
124	FIGURE 705.6(B) EXTENT OF DETECTABLE WARNINGS – RETURNED CURB FIGURE 705.6(C) EXTENT OF DETECTABLE WARNINGS – PARALLEL
125	FIGURE 705.7.1 PERPENDICULAR CURB RAMPS FIGURE 705.7.2 PARALLEL CURB RAMPS
126	FIGURE 705.7.3 BLENDED TRANSITIONS
127	FIGURE 705.7.4 PEDESTRIAN REFUGE ISLANDS FIGURE 705.7.5 PEDESTRIAN AT-GRADE RAIL CROSSINGS SECTION 706 ASSISTIVE LISTENING SYSTEMS
128	SECTION 707 AUTOMATIC TELLER MACHINES (ATMS) AND FARE MACHINES FIGURE 707.5(A) NUMERIC KEY LAYOUT – 12-KEY ASCENDING FIGURE 707.5(B) NUMERIC KEY LAYOUT – 12-KEY DESCENDING TABLE 707.6.1 – RAISED SYMBOLS
129	SECTION 708 TWO-WAY COMMUNICATION SYSTEMS
130	CHAPTER 8 SPECIAL ROOMS AND SPACES SECTION 801 GENERAL SECTION 802 ASSEMBLY AREAS FIGURE 802.3(A) WIDTH OF WHEELCHAIR SPACE IN ASSEMBLY AREA SINGLE SPACE FIGURE 802.3(B) WIDTH OF WHEELCHAIR SPACE IN ASSEMBLY AREA MULTIPLE ADJACENT SPACES FIGURE 802.4(A) DEPTH OF WHEELCHAIR SPACE IN ASSEMBLY AREA FRONT OR REAR ACCESS – NEW BUILDINGS FIGURE 802.4(B) DEPTH OF WHEELCHAIR SPACE IN ASSEMBLY AREA FRONT OR REAR ACCESS – EXISTING BUILDINGS
131	FIGURE 802.4(C) DEPTH OF WHEELCHAIR SPACE IN ASSEMBLY AREA SIDE ACCESS – NEW AND EXISTING BUILDINGS FIGURE 802.5.1(A) WHEELCHAIR SPACE LOCATION OVERLAP – REAR APPROACH – NEW AND EXISTING BUILDINGS
132	FIGURE 802.5.1(B) WHEELCHAIR SPACE LOCATION OVERLAP – SIDE APPROACH FIGURE 802.7.2(A) COMPANION SEAT ALIGNMENT – ELEVATION
133	FIGURE 802.7.2(B) COMPANION SEAT ALIGNMENT FRONT OR REAR APPROACH – EXISTING BUILDINGS FIGURE 802.7.2(C) COMPANION SEAT ALIGNMENT FRONT OR REAR APPROACH – NEW BUILDINGS FIGURE 802.7.2(D) COMPANION SEAT ALIGNMENT SIDE APPROACH
134	FIGURE 802.9.1.1 LINES OF SIGHT OVER THE HEADS OF SEATED SPECTATORS FIGURE 802.9.1.2 LINES OF SIGHT BETWEEN THE HEADS OF SEATED SPECTATORS
135	FIGURE 802.9.2 LINES OF SIGHT OVER STANDING SPECTATORS TABLE 802.9.2.2 REQUIRED WHEELCHAIR SPACE LOCATION ELEVATION OVER STANDING SPECTATORS
136	TABLE 802.10 WHEELCHAIR SPACE LOCATION DISPERSION
137	SECTION 803 DRESSING, FITTING AND LOCKER ROOMS SECTION 804 KITCHENS FIGURE 804.2.1(A) PASS-THROUGH KITCHEN CLEARANCE FIGURE 804.2.1(B) PASS-THROUGH KITCHEN CLEARANCE
138	FIGURE 804.2.2(A) U-SHAPED KITCHEN CLEARANCE FIGURE 804.2.2(B) U-SHAPED KITCHEN CLEARANCE FIGURE 804.2.2(C) U-SHAPED KITCHEN CLEARANCE – EXCEPTION
139	SECTION 805 TRANSPORTATION FACILITIES
140	FIGURE 805.2.2(A) SIZE OF BUS BOARDING AND ALIGHTING AREA – NEW BUILDINGS FIGURE 805.2.2(B) SIZE OF BUS BOARDING AND ALIGHTING AREA – EXISTING BUILDINGS
141	FIGURE 805.3 BUS SHELTERS
142	FIGURE 805.10 TRACK CROSSING SECTION 806 HOLDING CELLS AND HOUSING CELLS SECTION 807 COURTROOMS
143	SECTION 808 ENHANCED ACOUSTICS FOR CLASSROOMS
144	CHAPTER 9 FURNISHINGS AND EQUIPMENT SECTION 901 GENERAL SECTION 902 DINING SURFACES AND WORK SURFACES SECTION 903 BENCHES
145	FIGURE 903(A) BENCHES – BENCH SIZE AND CLEAR FLOOR SPACE FIGURE 903(B) BENCHES – BENCH BACK SUPPORT AND SEAT HEIGHT SECTION 904 SALES AND SERVICE COUNTERS AND WINDOWS FIGURE 904.3(A) SALES AND SERVICE COUNTERS – CROSS SECTION
146	FIGURE 904.3(B) SALES AND SERVICE COUNTERS – ELEVATION
147	FIGURE 904.4.2 HEIGHT OF CHECKOUT COUNTERS SECTION 905 STORAGE FACILITIES SECTION 906 CHARGING STATIONS SECTION 907 GAMING MACHINES AND TABLES
148	CHAPTER 10 RECREATIONAL FACILITIES SECTION 1001 GENERAL SECTION 1002 AMUSEMENT RIDES
149	FIGURE 1002.4.4.3 PROTRUSIONS IN WHEELCHAIR SPACES IN AMUSEMENT RIDES
150	SECTION 1003 RECREATIONAL BOATING FACILITIES SECTION 1004 EXERCISE MACHINES AND EQUIPMENT
151	FIGURE 1003.3.1(A) BOAT SLIP AND BOARDING PIER CLEARANCE FIGURE 1003.3.1(B) BOAT SLIP AND BOARDING PIER CLEARANCE EXCEPTION 1 – CLEAR PIER SPACE REDUCTION AT BOAT SLIPS AND BOARDING PIERS
152	FIGURE 1003.3.1(C) BOAT SLIP AND BOARDING PIER CLEARANCE – EXCEPTION 2 – EDGE PROTECTION AT BOAT SLIPS AND BOARDING PIERS SECTION 1005 FISHING PIERS AND PLATFORMS FIGURE 1005.4.2 EXTENDED GROUND OR DECK SURFACE AT FISHING PIERS AND PLATFORMS
153	SECTION 1006 GOLF FACILITIES SECTION 1007 MINIATURE GOLF FACILITIES
154	FIGURE 1007.3.2(A) GOLF CLUB REACH RANGE – NEW BUILDINGS FIGURE 1007.3.2(B) GOLF CLUB REACH RANGE – EXISTING BUILDINGS SECTION 1008 PLAY AREAS
155	TABLE 1008.3.2.1.2 NUMBER AND TYPES OF GROUND LEVEL PLAY COMPONENTS REQUIRED TO BE ON ACCESSIBLE ROUTES
157	FIGURE 1008.4.2.1 TRANSFER PLATFORMS FIGURE 1008.4.2.2 TRANSFER STEPS
158	SECTION 1009 SWIMMING POOLS, WADING POOLS, HOT TUBS AND SPAS FIGURE 1009.2.2 POOL LIFT SEAT LOCATION
159	FIGURE 1009.2.3(A) CLEAR DECK SPACE AT POOL LIFTS – NEW BUILDINGS FIGURE 1009.2.3(B) CLEAR DECK SPACE AT POOL LIFTS – EXISTING BUILDINGS FIGURE 1009.2.4 POOL LIFT SEAT HEIGHT FIGURE 1009.2.8 POOL LIFT SUBMERGED DEPTH
160	FIGURE 1009.3.2 SLOPED ENTRY SUBMERGED DEPTH FIGURE 1009.3.3 HANDRAILS FOR SLOPED ENTRY FIGURE 1009.4.1 CLEAR DECK SPACE AT TRANSFER WALLS FIGURE 1009.4.2 TRANSFER WALL HEIGHT
161	FIGURE 1009.4.3 DEPTH AND LENGTH OF TRANSFER WALLS FIGURE 1009.4.5 GRAB BARS FOR TRANSFER WALLS FIGURE 1009.5.1 SIZE OF TRANSFER PLATFORMS
162	FIGURE 1009.5.2 CLEAR DECK SPACE AT TRANSFER PLATFORMS FIGURE 1009.5.4 TRANSFER STEPS FIGURE 1009.5.6 SIZE OF TRANSFER STEPS FIGURE 1009.5.7(A) GRAB BARS – INDIVIDUAL GRAB BARS FIGURE 1009.5.7(B) GRAB BARS – CONTINUOUS GRAB BARS
163	SECTION 1010 SHOOTING FACILITIES WITH FIRING POSITIONS
164	CHAPTER 11 DWELLING UNITS AND SLEEPING UNITS SECTION 1101 GENERAL SECTION 1102 ACCESSIBLE UNITS
165	SECTION 1103 TYPE A UNITS
166	FIGURE 1103.11.2.4(A) WATER CLOSETS IN TYPE A UNITS – WATER CLOSET LOCATION
167	FIGURE 1103.11.2.4(B) WATER CLOSETS IN TYPE A UNITS – MINIMUM CLEARANCE FIGURE 1103.11.2.4(C) WATER CLOSETS IN TYPE A UNITS – CLEARANCE WITH LAVATORY (OVERLAP EXCEPTION) FIGURE 1103.11.2.4(D) WATER CLOSETS IN TYPE A UNITS – WATER CLOSET SEAT HEIGHT FIGURE 1103.11.2.5.1(A) CLEARANCE FOR BATHTUBS IN TYPE A UNITS WITH REMOVABLE SEAT FIGURE 1103.11.2.5.1(B) CLEARANCE FOR BATHTUBS IN TYPE A UNITS WITH PERMANENT SEAT
168	FIGURE 1103.11.2.5.2 STANDARD ROLL-IN-TYPE SHOWER COMPARTMENT IN TYPE A UNITS FIGURE 1103.12.1.1 MINIMUM KITCHEN CLEARANCE IN TYPE A UNITS
169	FIGURE 1103.12.1.2(A) U-SHAPED KITCHEN CLEARANCE IN TYPE A UNITS FIGURE 1103.12.1.2(B) U-SHAPED KITCHEN CLEARANCE IN TYPE A UNITS EXCEPTION FIGURE 1103.12.3 WORK SURFACE IN KITCHEN FOR TYPE A UNITS
170	FIGURE 1103.12.4 KITCHEN SINK FOR TYPE A UNITS
171	SECTION 1104 TYPE B UNITS FIGURE 1104.1.1 CLEAR FLOOR SPACE FOR TYPE B UNITS
172	FIGURE 1104.9 REACH OVER A KITCHEN OR BATHROOM CABINET
173	FIGURE 1104.11.1.1 SWING-UP GRAB BARS FOR WATER CLOSETS
174	FIGURE 1104.11.3.1.1 LAVATORY IN TYPE B UNITS – OPTION A BATHROOMS FIGURE 1104.11.3.1.2(A) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS WATER CLOSET LOCATION FIGURE 1104.11.3.1.2(B) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS CLEARANCE WIDTH AND DEPTH
175	FIGURE 1104.11.3.1.2(C) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS INCREASED CLEARANCE DEPTH – FORWARD APPROACH FIGURE 1104.11.3.1.2(D) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS CLEARANCE WITH LAVATORY OVERLAP
176	FIGURE 1104.11.3.1.3.1 PARALLEL APPROACH BATHTUB IN TYPE B UNITS – OPTION A BATHROOM
177	FIGURE 1104.11.3.1.3.2 FORWARD APPROACH BATHTUB IN TYPE B UNITS OPTION A BATHROOM FIGURE 1104.11.3.1.3.3(A) TRANSFER-TYPE SHOWER COMPARTMENT IN TYPE B UNITS FIGURE 1104.11.3.1.3.3(B) TRANSFER-TYPE SHOWER COMPARTMENT IN TYPE B UNITS EXCEPTION FIGURE 1104.11.3.2.1 LAVATORY IN TYPE B UNITS – OPTION B BATHROOM
178	FIGURE 1104.11.3.2.3.1 BATHROOM CLEARANCE IN TYPE B UNITS OPTION B BATHROOM FIGURE 1104.12.1.1 MINIMUM CLEARANCE IN TYPE B UNITS
179	FIGURE 1104.12.1.2(A) U-SHAPED KITCHEN CLEARANCE IN TYPE B UNITS FIGURE 1104.12.1.2(B) U-SHAPED KITCHEN CLEARANCE IN TYPE B UNITS – EXCEPTION
180	SECTION 1105 TYPE C (VISITABLE) UNITS
181	SECTION 1106 UNITS WITH COMMUNICATION FEATURES
182	INDEX
198	ICC MEMBERSHIP
199	ICC EVALUATION SERVICE
200	GET IMMEDIATE DOWNLOADS
201	ICC PLAN REVIEW SERVICES

Published By	Publication Date	Number of Pages
ICC	2017	201


PDF Format	Searchable	Printable	Preview Now

Standard Title	ICC A117.1-2017 Standard for Accessible and Usable Buildings and Facilities
Published Code	ICC
Publication Date	2017
Pages Count	201

ICC A117.1 2017

PDF Catalog

Related products