ISO 12003-2:2008
$50.70
Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 2: Rear-mounted ROPS
| Published By | Publication Date | Number of Pages |
| ISO | 2008-08 | 46 |
ISO 12003-2:2008 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post roll bar, frame and cab ROPS, and is applicable to tractors so equipped having the following characteristics.
- A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential).
- A fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle.
- A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.
Related products
-
ISO 16663-2:2003
Fishing nets — Method of test for the determination of mesh size — Part 2:…
-
ISO 2580-2:2003
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 2: Preparation of test specimens…
-
ISO 14621-2:2003
Space systems — Electrical, electronic and electromechanical (EEE) parts — Part 2: Control programme requirements…
-
ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes…
-
BS ISO 12003-2:2002
Agricultural and forestry tractors. Narrow-track wheeled tractors – Rear-mounted roll-over protective structures Published By Publication…
-
ISO 16031-2:2003
Systèmes aérospatiaux de fluides — Joints toriques, série en inches: diamètres intérieurs et sections, tolérances…
-
ISO 15876-2:2003
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2:…
-
ISO 16017-2:2003
Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent…
-
ISO 2897-2:2003
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test…
-
ISO 8254-2:2003
Paper and board — Measurement of specular gloss — Part 2: 75 degree gloss with…
-
ISO 3823-2:2003/Amd 1:2008
Dentistry — Rotary bur instruments — Part 2: Finishing burs — Amendment 1 Published By…
-
ISO 7240-2:2003
Fire detection and alarm systems — Part 2: Control and indicating equipment Published By Publication…
-
ISO 10540-2:2003
Animal and vegetable fats and oils — Determination of phosphorus content — Part 2: Method…
-
ISO 14368-2:2003
Verres de montres minéraux et en saphir — Partie 2: Fixation à la boîte par…
-
ISO 15106-2:2003
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 2:…
-
ISO 13555-2:2003
Diesel engines — Procedure for checking the dynamic timing of diesel fuel injection equipment —…
-
ISO 11003-2:2001
Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method…
-
ISO 4263-2:2003
Pétrole et produits connexes — Détermination du comportement au vieillissement des fluides et huiles inhibées…
-
ISO 15186-2:2003
Acoustique — Mesurage par intensité de l’isolation acoustique des immeubles et des éléments de construction…
-
BS ISO 3888-2:2002 2003
Passenger cars. Test track for a severe lane-change manoeuvre – Obstacle avoidance Published By Publication…
-
ISO 20783-2:2003
Pétrole et produits connexes — Détermination de la stabilité d’émulsions de fluides difficilement inflammables —…
-
ISO 15745-2:2003
Industrial automation systems and integration — Open systems application integration framework — Part 2: Reference…
-
ISO 10059-2:2003
Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with…
-
ISO 18436-2:2003
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel —…
-
ISO 10081-2:2003
Classification of dense shaped refractory products — Part 2: Basic products containing less than 7…
-
ISO 15616-2:2003
Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 2:…
-
ISO 2884-2:2003
Peintures et vernis — Détermination de la viscosité au moyen de viscosimètres rotatifs — Partie…
-
ISO 14698-2:2003
Cleanrooms and associated controlled environments — Biocontamination control — Part 2: Evaluation and interpretation of…
-
BS ISO 12003-2:2008:2009 Edition
Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors – Rear-mounted ROPS Published…
-
ISO 15023-2:2003
Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 2: Determination of properties Published By Publication…
-
ISO 6887-2:2003
Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and…
-
ISO 7638-2:2003
Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part…
-
ISO 5167-2:2003
Mesure de débit des fluides au moyen d’appareils déprimogènes insérés dans des conduites en charge…
-
ISO 7617-2:2003
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics Published By Publication…
-
ISO 17294-2:2003
Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination…
-
ISO 899-2:2003
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading Published…
-
ISO 6626-2:2003
Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow…
-
BS ISO 4046-2:2002 2003
Paper, board, pulps and related terms. Vocabulary – Pulping terminology Published By Publication Date Number…
-
ISO 7494-2:2003
Dentistry — Dental units — Part 2: Water and air supply Published By Publication Date…
-
ISO 15152:2003/Amd 2:2018
Tobacco — Determination of the content of total alkaloids as nicotine — Continuous-flow analysis method…
