ISO 15973:2000
$13.00
Rivets aveugles à rupture de tige à corps fermé, à tête bombée — AlA/St
| Published By | Publication Date | Number of Pages |
| ISO | 2000-12 | 10 |
La présente Norme internationale spécifie les caractéristiques dimensionnelles et mécaniques ainsi que les données d'application pour les rivets aveugles à rupture de tige à corps fermé, à tête bombée, avec un corps en alliage d'aluminium (AIA) et une tige en acier (St), de diamètres nominaux compris entre 3,2 mm et 6,4 mm inclus.
Related products
-
ISO 15873:2002
Irrigation equipment — Differential pressure Venturi-type liquid additive injectors Published By Publication Date Number of…
-
ISO 15976:2002
Closed end blind rivets with break pull mandrel and protruding head — St/St Published By…
-
ISO 19973-1:2007
Pneumatic fluid power — Assessment of component reliability by testing — Part 1: General procedures…
-
ISO 15673:2005
Guidelines for the simplified design of structural reinforced concrete for buildings Published By Publication Date…
-
BS EN ISO 15473:2020
Soil quality. Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic…
-
ISO 15983:2002
Open end blind rivets with break pull mandrel and protruding head — A2/A2 Published By…
-
BS EN ISO 15979:2002:2004 Edition
Open end blind rivets with break pull mandrel and protruding head. St/St Published By Publication…
-
ISO 19973-4:2007
Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators…
-
BS ISO 15903:2002
Soil quality. Format for recording soil and site information Published By Publication Date Number of…
-
ISO 15373:2001
Plastics — Polymer dispersions — Determination of free formaldehyde Published By Publication Date Number of…
-
BS ISO 17973:2002:2003 Edition
Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis Published…
-
BS EN ISO 15983:2002:2004 Edition
Open end blind rivets with break pull mandrel and protruding head. A2/A2 Published By Publication…
-
BS EN ISO 15976:2002:2004 Edition
Closed end blind rivets with break pull mandrel and protruding head. St/St Published By Publication…
-
ISO 15970:2008
Gaz naturel — Mesurage des caractéristiques — Caractéristiques volumétriques: masse volumique, pression, température et facteur…
-
ISO 15979:2002
Open end blind rivets with break pull mandrel and protruding head — St/St Published By…
-
ISO 15793:2000
Durum wheat semolinas — Determination of the undersize fraction Published By Publication Date Number of…
-
BS ISO/IEC 15963:2009:2012 Edition
Information technology. Radio frequency identification for item management. Unique identification for RF tags Published By…
-
ISO 19973-3:2007
Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders with…
-
BS EN ISO 15978:2002:2004 Edition
Open end blind rivets with break pull mandrel and countersunk head. AIA/St Published By Publication…
-
ISO 15978:2002
Open end blind rivets with break pull mandrel and countersunk head — AIA/St Published By…
-
ISO 15903:2002
Soil quality — Format for recording soil and site information Published By Publication Date Number…
-
ISO 19973-2:2007
Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control…
-
ISO 15913:2000
Water quality — Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography…
-
ISO 15473:2002
Soil quality — Guidance on laboratory testing for biodegradation of organic chemicals in soil under…
-
BS ISO 15373:2001
Plastics. Polymer dispersions. Determination of free formaldehyde Published By Publication Date Number of Pages BSI…
-
ISO 15974:2000
Rivets aveugles à rupture de tige à corps fermé, à tête fraisée — AlA/St Published…
-
ISO/IEC 15963-1:2020
Information technology — Radio frequency identification for item management — Part 1: Unique identification for…
-
AS ISO/IEC 15963:2006
Information technology – Radio frequency identification for item management – Unique identification for RF tags…
-
ISO 15975:2002
Closed end blind rivets with break pull mandrel and protruding head — AI/AIA Published By…
-
ISO 15977:2002
Open end blind rivets with break pull mandrel and protruding head — AIA/St Published By…
-
BS EN ISO 15973:2001:2004 Edition
Closed and blind rivets with break pull mandrel and protruding head. AIA/St Published By Publication…
-
BS EN ISO 1597:2000
Plastics. Unplasticized cellulose acetate. Determination of acetic acid yield Published By Publication Date Number of…
-
ISO 15971:2008
Natural gas — Measurement of properties — Calorific value and Wobbe index Published By Publication…
-
ISO/IEC 15963:2009
Information technology — Radio frequency identification for item management — Unique identification for RF tags…
-
ISO 17973:2002
Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental…
-
BS EN ISO 15913:2003
Water quality. Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and…
-
ISO/IEC 15963-2:2020
Information technology — Radio frequency identification for item management — Part 2: Unique identification for…
-
BS EN ISO 15974:2001:2004 Edition
Closed and blind rivets with break pull mandrel and countersunk head. AIA/St Published By Publication…
-
ISO 2300:1973
Sawn timber of broadleaved species — Defects — Terms and definitions Published By Publication Date…
-
ISO 2900:1973
Potassium hydroxide for industrial use — Determination of carbon dioxide content — Titrimetric method Published…
