ISO 23599:2019
$46.15
Assistive products for blind and vision-impaired persons — Tactile walking surface indicators
Published By | Publication Date | Number of Pages |
ISO | 2019-01 | 48 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This document provides product specifications for tactile walking surface indicators (TWSIs) and recommendations for their installation in order to assist in the safe and independent mobility of blind or vision-impaired persons.
This document specifies two types of TWSIs: attention patterns and guiding patterns. Both types can be used indoors and outdoors throughout the built environment where there are insufficient cues for wayfinding, or at specific hazards.
NOTE Some countries have adopted other designs of TWSIs based on the consolidated findings of science, technology and experience, ensuring that they can be detected and distinguished by most users.
This document is not intended to replace requirements and recommendations contained in such national standards, regulations or guidelines.
Published Code | ISO |
---|---|
Published By | International Organization for Standardization |
Publication Date | 2019-01 |
Pages Count | 48 |
Language | English |
Edition | 2 |
File Size | 3.8 MB |
ICS Codes | 11.180.30 - Aids for blind or partially sighted people |
Related products
-
BSI PD ISO/TR 23199:2019
Cosmetics. Calculation of organic indexes of hydrolates. Supplemental information for ISO 16128-2 Published By Publication…
-
ISO 23599:2012
Assistive products for blind and vision-impaired persons — Tactile walking surface indicators Published By Publication…
-
JIS K 6250:2019
Rubber—General procedures for preparing and conditioning test pieces for physical test methods Published By Publication…
-
BS ISO 23499:2013
Coal. Determination of bulk density for the use in charging of coke ovens Published By…
-
BS EN ISO 23999:2021
Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat Published By…
-
BS ISO/IEC 27006:2015+A1:2020
Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management…
-
ISO 23529:2010
Rubber — General procedures for preparing and conditioning test pieces for physical test methods Published…
-
BS ISO 23509:2006
Bevel and hypoid gear geometry Published By Publication Date Number of Pages BSI 2006 148
-
ISO/TR 22849:2011
Design recommendations for bevel gears Published By Publication Date Number of Pages ISO 2011-04 42
-
BS ISO 23519:2010
Sintered metal materials, excluding hardmetals. Measurement of surface roughness Published By Publication Date Number of…
-
ISO/TR 10300-30:2017
Calculation of load capacity of bevel gears — Part 30: ISO rating system for bevel…
-
ISO/TR 23199:2019
Cosmétiques — Calcul de l’indice biologique des hydrolats — Informations complémentaires à utiliser avec l’ISO…
-
BS ISO 23529:2016
Rubber. General procedures for preparing and conditioning test pieces for physical test methods Published By…
-
BS ISO 23559:2007 2008
Plastics. Film and sheeting. Guidance on the testing of thermoplastic films Published By Publication Date…
-
BS EN ISO 23999:2012
Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat Published By…
-
AGMA ISO 23509-B17:2017 Edition
Bevel and Hypoid Gear Geometry Published By Publication Date Number of Pages AGMA 2017 149
-
ISO 23519:2010
Sintered metal materials, excluding hardmetals — Measurement of surface roughness Published By Publication Date Number…
-
BS ISO 23509:2016
Bevel and hypoid gear geometry Published By Publication Date Number of Pages BSI 2016 150
-
BS ISO 23529:2010
Rubber. General procedures for preparing and conditioning test pieces for physical test methods Published By…
-
BS ISO 23499:2008
Coal. Determination of bulk density Published By Publication Date Number of Pages BSI 2008 16
-
ISO 10300-2:2014
Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting)…
-
ISO 19724:2016
Gasoline engines with direct injection — Cleanliness assessment of fuel injection equipment Published By Publication…
-
BS ISO 23529:2016 – TC:2020 Edition
Tracked Changes. Rubber. General procedures for preparing and conditioning test pieces for physical test methods…
-
BS EN ISO 23999:2021 – TC
Tracked Changes. Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat…
-
BS ISO 23559:2011
Plastics. Film and sheeting. Guidance on the testing of thermoplastic films Published By Publication Date…
-
ISO 23499:2013
Coal — Determination of bulk density for the use in charging of coke ovens Published…
-
ISO 10300-3:2014
Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength…
-
ISO 23509:2016
Géométrie des engrenages coniques et hypoïdes Published By Publication Date Number of Pages ISO 2016-11…
-
ISO 16012:2015
Plastiques — Détermination des dimensions linéaires des éprouvettes Published By Publication Date Number of Pages…
-
BS ISO 23529:2004
Rubber. General procedures for preparing and conditioning test pieces for physical test methods Published By…
-
JIS T 9251:2014
Guidelines for older persons and persons with disabilities – Shapes, dimensions and patterns of raised…
-
ISO 23529:2016
Rubber — General procedures for preparing and conditioning test pieces for physical test methods Published…
-
ISO 23559:2011
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films Published By…
-
ISO 23999:2018
Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat Published…
-
JIS A 1454:2016
Test Methods – Resilient Floor coverings Published By Publication Date Number of Pages JIS 2016-03-22…
-
BS EN ISO 23999:2018 – TC:2020 Edition
Tracked Changes. Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat…
-
ISO 10300-1:2014
Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors…
-
BS EN ISO 23999:2018
Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat Published By…
-
BS ISO 23509:2016 – TC:2020 Edition
Tracked Changes. Bevel and hypoid gear geometry Published By Publication Date Number of Pages BSI…
-
BS EN 15811:2009:2011 Edition
Agricultural machinery. Guards for moving parts of power transmission. Guard opening with tool Published By…