ISO 7530-1:1990
$36.40
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: General requirements and sample dissolution
| Published By | Publication Date | Number of Pages |
| ISO | 1990-12 | 11 |
Specifies methods for the determination of up to 4 % (m/m) of cobalt, chromium, copper, iron, manganese and aluminium, up to 2 % (m/m) of silicon and from 0,05 % (m/m) to 1 % (m/m) of vanadium in nickel alloys. Typical compositions of some nickel alloys are given in annex B. This part of ISO 7530 specifies the general requirements for analysis by flame atomic absorption, preparation and dissolution of the test sample, method of calculation and the procedures used for the evaluation of the repeatability and reproducibility of the individual methods.
Related products
-
BS 7963:2000
Ergonomics of the thermal environment. Guide to the assessment of heat strain in workers wearing…
-
BS ISO/IEC 7350:1991:1992 Edition
Information technology. Registration of repertoires of graphic characters from ISO/IEC 10367 Published By Publication Date…
-
BS 5914:1980
Methods of calibrating leak-detectors of the mass-spectrometer-type used in the field of vacuum technology Published…
-
BS EN 368:1993
Protective clothing. Protection against liquid chemicals. Test method: resistance of materials to penetration by liquids…
-
BS EN ISO 7730:1995
Moderate thermal environments. Determination of the PMV and PPD indices and specification of the conditions…
-
BS 7455-6:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS EN ISO 7539-2:1995
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of bent-beam specimens…
-
ISO 7530-3:1990
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 3: Determination of chromium content…
-
ISO 7530-2:1990
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 2: Determination of cobalt content…
-
BS 7455-8:1992
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for determination of silicon…
-
BS EN ISO 7536:1996
Methods of test for petroleum and its products. Petroleum products. Determination of oxidation stability of…
-
ISO 7530-6:1990
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 6: Determination of manganese content…
-
BS 1841-1:1996
Rear-mounted, three-point linkage on agricultural wheeled tractors – Specification for categories 1, 2, 3 and…
-
BS 7087-11:1996
Herbs and spices ready for food use – Specification for ground paprika Published By Publication…
-
BS 7455-2:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS 7455-5:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS 4317-27:1992
Methods of test for cereals and pulses – Determination of rheological properties of doughs using…
-
BS 7455-1:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – General requirements and sample dissolution…
-
ISO 7530-4:1990
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 4: Determination of copper content…
-
BS 1841-1:1991
Rear-mounted, three-point linkage on agricultural wheeled tractors – Specification for categories 1, 2 and 3…
-
BS EN ISO 7500-1:1999
Metallic materials. Verification of static uniaxial testing machines – Tension/compression testing machines. Verification and calibration…
-
BS 1610-3:1990:1991 Edition
Materials testing machines and force verification equipment – Specification for the grading of the forces…
-
BS EN ISO 7500-2:1999
Metallic materials. Verification of static uniaxial testing machines – Tension creep testing machines. Verification of…
-
BS 2000-431:1998
Methods of test for petroleum and its products – Petroleum products. Determination of acid number.…
-
ASCE 9780784476352 2012
Earthquakes and Engineers – An International History Published By Publication Date Number of Pages ASCE…
-
BS EN ISO 7500-1:2004:2010 Edition
Metallic materials. Verification of static uniaxial testing machines – Tension/compression testing machines. Verification and calibration…
-
BS 2000-40:1995
Methods of test for petroleum and its products – Petroleum products. Determination of oxidation stability…
-
BS ISO 7530-1:2015
Nickel alloys. Flame atomic absorption spectrometric analysis – Determination of cobalt, chromium, copper, iron and…
-
JIS C 3662-5:2009
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V-Part 5: Flexible…
-
ISO 7530-5:1990
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 5: Determination of iron content…
-
BS 7455-7:1992
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for determination of aluminium…
-
BS EN ISO 7539-3:1995:1994 Edition
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of U-bend specimens…
-
BS 7455-4:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS 7530-1:1992
Methods for froth flotation testing of hard coal – Laboratory procedure Published By Publication Date…
-
IEC 61097-1:2007
Global maritime distress and safety system (GMDSS) – Part 1: Radar transponder – Marine search…
-
BS 1610-1:1992
Materials testing machines and force verification equipment – Specification for the grading of the forces…
-
BS EN ISO 7539-4:1995
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of uniaxially loaded…
-
BS 7455-3:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS 7455-9:1994
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for determination of vanadium…
-
BS EN ISO 7539-7:1995:1990 Edition
Corrosion of metals and alloys. Stress corrosion testing – Slow strain rate testing Published By…
