ISO 9270-1:2010
$19.50
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
| Published By | Publication Date | Number of Pages |
| ISO | 2010-08 | 14 |
ISO 9270-1:2010 specifies the dimensions and tolerances of 7/24 taper spindle noses with tenons for automatic tool changers, intended for use with the corresponding tool shanks of forms A, AD, AF, U, UD and UF according to ISO 7388-1.
Related products
-
BS EN ISO 9170-1:2020:2024 Edition
Terminal units for medical gas pipeline systems – Terminal units for use with compressed medical…
-
BS ISO 9276-2:2014
Representation of results of particle size analysis – Calculation of average particle sizes/diameters and moments…
-
ISO 6270-1:2017
Paints and varnishes — Determination of resistance to humidity — Part 1: Condensation (single-sided exposure)…
-
ISO 7270-1:2003/Amd 1:2010
Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers…
-
ISO 9270-2:2010
7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of…
-
ISO 16084:2017
Équilibrage pour outils rotatifs et systèmes d’outillage Published By Publication Date Number of Pages ISO…
-
BS EN 15224:2016:2017 Edition
Quality management systems. EN ISO 9001:2015 for healthcare Published By Publication Date Number of Pages…
-
BS EN ISO 6270-1:2018
Paints and varnishes. Determination of resistance to humidity – Condensation (single-sided exposure) Published By Publication…
-
BSI PD CEN ISO/TS 16775:2021 – TC:2022 Edition
Tracked Changes. Packaging for terminally sterilized medical devices. Guidance on the application of ISO 11607-1…
-
BS ISO 7270-2:2012
Rubber. Analysis by pyrolytic gas-chromatographic methods – Determination of styrene/butadiene/isoprene ratio Published By Publication Date…
-
ISO 20804:2022
Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering…
-
BS ISO/IEC 24727-6:2010:2011 Edition
Identification cards. Integrated circuit card programming interfaces – Registration authority procedures for the authentication protocols…
-
BS ISO 9924-2:2016
Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry…
-
BS EN ISO 9554:2010
Fibre ropes. General specifications Published By Publication Date Number of Pages BSI 2010 32
-
CSA Z5359:16 (R2020):2016 Edition
Anesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases, medical vacuum,…
-
BS EN ISO 10555-1:2013+A1:2017:2018 Edition
Intravascular catheters. Sterile and single-use catheters – General requirements Published By Publication Date Number of…
-
BS EN ISO 9170-1:2020
Terminal units for medical gas pipeline systems – Terminal units for use with compressed medical…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
-
BS EN ISO 6270-2:2018
Paints and varnishes. Determination of resistance to humidity – Condensation (in-cabinet exposure with heated water…
-
BS ISO 7270-1:2003+A1:2010:2011 Edition
Rubber. Analysis by pyrolytic gas-chromatographic methods – Identification of polymers (single polymers and polymer blends)…
-
ISO 9170-1:2017
Prises murales pour systèmes de distribution de gaz médicaux — Partie 1: Prises murales pour…
-
BSI 21/30372607 DC:2021 Edition
BS ISO 20804. Determination of the specific surface area of porous and particulate systems by…
-
CSA Z9170-1:19:2019 Edition
Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with…
-
ISO 5270:2012
Pulps — Laboratory sheets — Determination of physical properties Published By Publication Date Number of…
-
ISO 9276-4:2001/Amd 1:2017
Representation of results of particle size analysis — Part 4: Characterization of a classification process…
-
BS ISO/IEC 27033-3:2010:2011 Edition
Information technology. Security techniques. Network security – Reference networking scenarios. Threats, design techniques and control…
-
ISO 7270-1:2020
Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers…
-
BS ISO 3384-1:2011+A1:2013
Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression – Testing at constant temperature…
-
ISO/TS 9250-1:2012
Engins de terrassement — Liste multilingue de termes équivalents — Partie 1: Généralités Published By…
-
BS EN ISO 5270:2000
Pulps. Laboratory sheets. Determination of physical properties Published By Publication Date Number of Pages BSI…
-
BS ISO 7270-1:2020
Rubber. Analysis by pyrolytic gas-chromatographic methods – Identification of polymers (single polymers and polymer blends)…
-
SA TS ISO 9250.1:2021
Earth-moving machinery – Multilingual listing of equivalent terms – General Published By Publication Date Number…
-
ISO 15181-6:2012
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part…
-
BS ISO 9277:2010
Determination of the specific surface area of solids by gas adsorption. BET method Published By…
-
BS EN ISO 6270-1:2001:2002 Edition
Paints and varnishes. Determination of resistance to humidity – Continuous condensation Published By Publication Date…
-
BS EN ISO 5270:2012
Pulps. Laboratory sheets. Determination of physical properties Published By Publication Date Number of Pages BSI…
-
BS ISO 9276-4:2001+A1:2017
Representation of results of particle size analysis – Characterization of a classification process Published By…
-
BS ISO 3384-2:2012:2013 Edition
Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression – Testing with temperature cycling…
-
BSI PD ISO/TS 9250-1:2012:2013 Edition
Earth-moving machinery. Multilingual listing of equivalent terms – General Published By Publication Date Number of…
-
BS ISO 9276-2:2001
Representation of results of particle size analysis – Calculation of average particle sizes/diameters and moments…
