ISO 9448-7:1991
$13.00
Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1
| Published By | Publication Date | Number of Pages |
| ISO | 1991-10 | 8 |
Specifies the main dimensions and tolerances, as well as the hardness and the designation of bushes. Gives guidance on the materials. Details not stated are left to the manufacturer's discretion. Annex A is for information only.
Related products
-
ISO 9448-6:1991
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type…
-
BS 5762:1979
Methods for crack opening displacement (COD) testing Published By Publication Date Number of Pages BSI…
-
BS EN 10214:1995
Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions Published By Publication…
-
BS EN 13203-3:2022
Gas-fired domestic appliances producing hot water – Assessment of energy consumption of solar supported gas-fired…
-
BS EN 13203-3:2022 – TC
Tracked Changes. Gas-fired domestic appliances producing hot water – Assessment of energy consumption of solar…
-
BS EN 10258:1997
Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape Published By…
-
BS EN ISO 9445:2006
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions…
-
BS 5447:1977
Methods of test for plane strain fracture toughness (KIc) of metallic materials Published By Publication…
-
BS EN ISO 9443:2018
Surface quality classes for hot-rolled bars and wire rod Published By Publication Date Number of…
-
IEEE 1003.1-2008
IEEE Standard for Information Technology – Portable Operating System Interface (POSIX(TM)) Published By Publication Date…
-
BS 1016-13:1980:1992 Edition
Methods for analysis and testing of coal and coke – Tests special to coke Published…
-
ISO 45:1990
Aircraft — Pressure refuelling connections Published By Publication Date Number of Pages ISO 1990-12 8
-
ISO 9448-3:1991
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain,…
-
BS 4231:1992
Classification for viscosity grades of industrial liquid lubricants Published By Publication Date Number of Pages…
-
ASHRAE Fundamentals Handbook IP 2013
2013 ASHRAE Handbook – Fundamentals – IP Edition Published By Publication Date Number of Pages…
-
ISO 9448-1:1991
Tools for pressing — Guide bushes — Part 1: Forms Published By Publication Date Number…
-
IEEE/OpenGroup 1003.1 2013Edition
IEEE Standard for Information Technology—Portable Operating System Interface (POSIX(TM)) Base Specifications, Issue 7 Published By…
-
BS AU 50-1.2.3:1993
Tyres and wheels. Tyres. Commercial vehicle tyres – Method of measuring rolling resistance Published By…
-
ISO 9448-5:1991
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed,…
-
BS EN ISO 3691-4:2020
Industrial trucks. Safety requirements and verification – Driverless industrial trucks and their systems Published By…
-
BS 349:1973
Specification for identification of the contents of industrial gas containers Published By Publication Date Number…
-
IEEE 9945-2009
IEEE/ISO/IEC International Standard – Information technology Portable Operating System Interface (POSIX(TM)) Base Specifications, Issue 7…
-
ISO 9448-2:1991
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type…
-
BS 4231:1982
Classification for viscosity grades of industrial liquid lubricants Published By Publication Date Number of Pages…
-
BS EN 10221:1996
Specification for surface quality classes for hot-rolled bars and rods. Technical delivery conditions Published By…
-
ISO 9448-8:1991
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type…
-
BS EN 10259:1997
Cold-rolled stainless and heat resisting steel wide strip and plate Tolerances on dimensions and shape…
-
IEEE 1003.1-2017
IEEE Standard for Information Technology–Portable Operating System Interface (POSIX(TM)) Base Specifications, Issue 7 (Superseded Redline)…
-
BS 7568-20:1992
Press tools – Guide bushes. Form C, gliding bushes, headed, type 1 Published By Publication…
-
ISO 9448-4:1991
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type…
-
BS 7448-1:1991:2002 Edition
Fracture mechanics toughness tests – Method for determination of KIc, critical CTOD and critical J…
-
IEEE 1003.1-2017(Redline)
IEEE Standard for Information Technology–Portable Operating System Interface (POSIX(TM)) Base Specifications, Issue 7 (Redline) Published…
-
BS 6911-10:1996:2006 Edition
Testing earth-moving machinery – Machine-mounted retrieval device. Performance requirements Published By Publication Date Number of…
-
BS 6911-7:1992
Testing earth-moving machinery – Testing of earth-moving machinery. Specification for units of measurement and tolerances…
-
BS 7568-23:1992
Press tools – Guide bushes. Form F, ball cage bushes, flanged, type 1 Published By…
-
ISO 13774:1998
Rubber and plastics hoses for fuels for internal-combustion engines — Method of test for flammability…
-
BS 7448-2:1997
Fracture mechanics toughness tests – Method for determination of KIc, critical CTOD and critical J…
-
BS 7448-4:1997:2001 Edition
Fracture mechanics toughness tests – Method for determination of fracture resistance curves and initiation values…
-
IEEE 1003.1 2008
Standard for Information Technology – Portable Operating System Interface (POSIX(R)) Published By Publication Date Number…
-
IEEE 1003.1, 2013 Edition
IEEE Standard for Information Technology—Portable Operating System Interface (POSIX(TM)) Base Specifications, Issue 7 Published By…
