NACE SP0298-2007
$23.40
Standard Practice – Sheet Rubber Linings for Abrasion and Corrosion Service
| Published By | Publication Date | Number of Pages |
| NACE | 2007 | 20 |
Full Description
This standard practice details procedures for providing sheet rubber lining protection to new and existing equipment, such as piping and vessels. This standard provides recommendations for surface preparation and the dimensions of piping that can be rubber lined. Also covered are the types of rubber lining materials available and their curing methods. Included are several figures showing examples of the types of equipment that can be lined, and tables with typical maximum lengths and dimensions for pipe.
Related products
-
NACE SP0208-2008
Internal Corrosion Direct Assessment Methodology for Liquid Petroleum Pipelines Published By Publication Date Number of…
-
NACE SP0198-2017
Control of Corrosion under Thermal Insulation and Fireproofing Materials – A Systems Approach Published By…
-
NACE SP0191-2017
Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories Published By Publication Date…
-
NACE RP0291-2005
Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories Published By Publication…
-
BS ISO 20860-2:2009
Road vehicles. 50 ohms impedance radio frequency connection system interface – Test procedures Published By…
-
ASTM-F1856:2004 Edition
F1856-04e1 Standard Practice for Determining Toner Usage for Printer Cartridges Published By Publication Date Number…
-
NACE SP0291-2017
Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories Published By Publication…
-
NACE SP0294-2006
Standard Practice – Design, Fabrication, and Inspection of Storage Tank Systems for Concentrated Fresh and…
-
NACE SP0188-2006
Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates Published By Publication Date Number…
-
NACE SP0207-2007
Performing Close-Interval Potential Surveys and DC Surface Potential Gradient Surveys on Buried or Submerged Metallic…
-
NACE SP0108-2008
Corrosion Control of Offshore Structures by Protective Coatings Published By Publication Date Number of Pages…
-
ASTM-D4787 2018
D4787-13(2018) Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates…
-
ASTM-D4787 2013
D4787-13 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates…
-
BS EN 4531-101:2007:2008 Edition
Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts –…
-
BS EN 60684-3-420 to 422:2002
Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving – Polyethylene terephthalate…
-
NACE SP0490-2007
Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 μm (10 to…
-
BS EN 50298:1999
Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements Published By Publication Date Number…
-
BS EN 60512-10-4:1997
Connectors for electronic equipment. Tests and measurements. Impact tests (free components), static load tests (fixed…
-
NACE SP0178-2007
Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to Be Lined for Immersion…
-
BS EN 60298:1996:2001 Edition
A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and…
-
NACE SP0592-2006
Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars…
-
BS EN 14346:2006:2007 Edition
Characterization of waste. Calculation of dry matter by determination of dry residue or water content…
-
NACE SP0197-2009
Standard Format for Computerized Electrochemical Polarization Curve Data Files Published By Publication Date Number of…
-
ISO 22702:2003
Utility lighters — General consumer-safety requirements Published By Publication Date Number of Pages ISO 2003-11…
-
NACE SP0195-2017
Standard Practice – Corrosion Control of sucker Rods by Chemical treatment Published By Publication Date…
-
ASTM-F438 2017
F438-17 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 Published…
-
NACE SP0286-2007
Standard Recommended Practice – Electrical Isolation of Cathodically Protected Pipelines Published By Publication Date Number…
-
ISO 15706-1:2002/Amd 1:2008
Information and documentation — International Standard Audiovisual Number (ISAN) — Part 1: Audiovisual work identifier…
-
NACE SP0295-2008
Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars…
-
ASTM-F1959:2004 Edition
F1959/F1959M-04 Standard Test Method for Determining the Arc Thermal Performance Value of Materials for Clothing…
-
NACE SP0508-2017
Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts…
-
BS EN 10298:2005
Steel tubes and fittings for onshore and offshore pipelines. Internal lining with cement mortar Published…
-
BS EN 12817:2010
LPG equipment and accessories. Inspection and requalification of LPG tanks up to and including 13…
-
NACE SP0690-2009
Standard Format for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input…
-
ASME PTB 2 2022
ASME PTB-2-2022 Guide to Life Cycle Management of Pressure Equipment Integrity Published By Publication Date…
-
BS EN 62208:2003 2004
Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements Published By Publication Date Number…
-
BS EN ISO 24343-1:2012
Resilient and laminate floor coverings. Determination of indentation and residual indentation – Residual indentation Published…
-
BS EN ISO 15876-5:2017
Plastics piping systems for hot and cold water installations. Polybutene (PB) – Fitness for purpose…
-
NACE SP0892-2007
Standard Practice – Coatings and Linings over Concrete for Chemical Immersion and Containment Service Published…
-
BS EN 62271-200:2004:2005 Edition
High-voltage switchgear and controlgear – AC metal-enclosed switchgear and controlgear for rated voltages above 1…
