23.020.35 – Gas cylinders – PDF Standards Store ?u= Wed, 06 Nov 2024 01:29:58 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png 23.020.35 – Gas cylinders – PDF Standards Store ?u= 32 32 ISO/TS 19016:2019 ?u=/product/publishers/iso/iso-ts-190162019/ Wed, 06 Nov 2024 01:29:58 +0000 Gas cylinders — Cylinders and tubes of composite construction — Modal acoustic emission (MAE) testing for periodic inspection and testing
Published By Publication Date Number of Pages
ISO 2019-10 32
]]> This document describes the use of modal acoustic emission (MAE) testing during periodic inspection and testing of hoop wrapped and fully wrapped composite transportable gas cylinders and tubes, with aluminium-alloy, steel or non-metallic liners or of linerless construction, intended for compressed and liquefied gases under pressure.

This document addresses the periodic inspection and testing of composite cylinders constructed to ISO 11119-1, ISO 11119-2, ISO 11119-3, ISO 11515 and ISO/TS 17519 and can be applied to other composite cylinders designed to comparable standards when authorized by the competent authority.

Unless noted by exception, the use of "cylinder" in this document refers to both cylinders and tubes.

]]> ISO/TS 15453:2017 ?u=/product/publishers/iso/iso-ts-154532017/ Wed, 06 Nov 2024 01:26:46 +0000 Gas cylinders — Seamless steel and aluminium-alloy gas cylinders — Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions
Published By Publication Date Number of Pages
ISO 2017-04 16
]]> ISO/TS 15453:2017 details the checks, inspections and tests to be performed in order to qualify and certify existing seamless steel and aluminium-alloy cylinders of water capacity less than 150 l used for the transport of gases, manufactured in a jurisdiction in accordance with its national regulations, for use in jurisdictions other than that of manufacture or first use.

NOTE For specific requirements regarding gas cylinders that have been used in toxic gas service, see 5.7.

ISO/TS 15453:2017 does not address acetylene cylinders.

]]> ISO/TR 7470:1988 ?u=/product/publishers/iso/iso-tr-74701988/ Wed, 06 Nov 2024 01:18:47 +0000 Valve outlets for gas cylinders — List of provisions which are either standardized or in use
Published By Publication Date Number of Pages
ISO 1988-12 13
]]> Specifies details for types of threads and thread sizes. Tabulates nominal diameters from 9,73 mm up to and including 30 mm together with the corresponding pitches and designations, refers to the national standards of concern (table 1). Table 2 contains valve outlets for toxic gases; valve outlets for flammable gases are given in table 3. Table 4 gives valve outlets for oxidizing gases, and table 5 includes valve outlets for inert gases.

]]> ISO/TR 22694:2008 ?u=/product/publishers/iso/iso-tr-226942008/ Wed, 06 Nov 2024 01:16:01 +0000 Gas cylinders — Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing
Published By Publication Date Number of Pages
ISO 2008-05 62
]]> The aim of ISO/TR 22694:2008 is to establish a technical basis for developing quantitative, allowable flaw sizes and for setting acceptance/rejection limits for cylinders at the time of periodic inspection and testing based on the performance and mechanical properties of the cylinders.

]]> ISO/TR 19811:2017 ?u=/product/publishers/iso/iso-tr-198112017/ Wed, 06 Nov 2024 01:14:33 +0000 Gas cylinders — Service life testing for cylinders and tubes of composite construction
Published By Publication Date Number of Pages
ISO 2017-05 16
]]> ISO/TR 19811:2017 covers composite cylinders and tubes to be used under the International Regulation for Transport of dangerous Goods by sea, air and land:

– with a water capacity up to 3000 l;

– with a design life greater than 15 years.

ISO/TR 19811:2017 provides:

– information on existing service life test programmes from ISO/TC 58/SC 3 member countries;

– comments (initially for internal committee use only) on similarities and differences;

– recommendations on the feasibility of harmonization and whether it would be appropriate to develop an ISO deliverable.

]]> ISO/TR 17329:2015 ?u=/product/publishers/iso/iso-tr-173292015/ Wed, 06 Nov 2024 01:13:07 +0000 Gas cylinders — Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes
Published By Publication Date Number of Pages
ISO 2015-11 42
]]> ISO/TR 17329:2015 provides an inventory, as far as known at time of publication, of manufacturer's identification marks and their assigned radio frequency identification (RFID) codes according to ISO 21007-1 and ISO 21007-2. The listing includes marks of existing gas cylinder manufacturers, as well as cylinder manufacturers which have ceased production in the past, but whose cylinders can still be in service today.

NOTE It is intended to revise Annex A of this Technical Report from time to time in order to update the list of codes and identification marks of gas cylinder manufacturers in accordance with the progressing commercial and economic development in the cylinder manufacturing industry.

Any request for inclusion or modification of these identifications is to be made to the ISO/TC 58/SC 4 Secretariat, who would update the information in Annex A after consultation with the committee leadership.

]]> ISO/TR 16115:2013 ?u=/product/publishers/iso/iso-tr-161152013/ Wed, 06 Nov 2024 01:12:19 +0000 Gas cylinders — Classification of imperfections arising during the manufacture of seamless steel and aluminium alloy gas cylinders
Published By Publication Date Number of Pages
ISO 2013-11 30
]]> ISO/TR 16115:2013 specifies the procedure on how to evaluate and treat the most commonly found manufacturing imperfections on seamless steel and aluminium alloy gas cylinders at visual inspection at the stage of product acceptance.

It contains a template for the relevant cylinder design International Standards (i.e. ISO 9809-1, ISO 9809-2, and ISO 9809-3 for seamless steel and ISO 7866 for seamless aluminium alloy cylinders). It further contains information on how to implement the provisions into other cylinder design standards.

]]> ISO/TR 14600:2000 ?u=/product/publishers/iso/iso-tr-146002000/ Wed, 06 Nov 2024 01:11:22 +0000 Gas cylinders — International quality conformance system — Basic rules
Published By Publication Date Number of Pages
ISO 2000-08 16
]]> Gas cylinders — International quality conformance system — Basic rules
Published By Publication Date Number of Pages
ISO 2000-08 16
]]> ISO/TR 13763:1994 ?u=/product/publishers/iso/iso-tr-137631994/ Wed, 06 Nov 2024 01:10:57 +0000 Safety and performance criteria for seamless gas cylinders
Published By Publication Date Number of Pages
ISO 1994-07 44
]]> Offers guidance towards the preparation of future gas cylinder standards, revisions to existing gas cylinder standards, and identifies aspects of design criteria and tests which are recognized as providing information relevant to the safety and performance in service of seamless gas cylinders of water capacities between 0,5 l and 150 l. These principles shall also be applied, where possible, to cylinders with water capacities outside of the limits stated. Where applicable guidance is given on recommended procedures and limiting requirements.

]]> ISO/TR 13086-4:2019 ?u=/product/publishers/iso/iso-tr-13086-42019/ Wed, 06 Nov 2024 01:10:29 +0000 Gas cylinders — Guidance for design of composite cylinders — Part 4: Cyclic fatigue of fibres and liners
Published By Publication Date Number of Pages
ISO 2019-09 26
]]> This document addresses the topic of cyclic fatigue of structural reinforcing fibres as used in composite cylinders, and cyclic fatigue of structural and non-structural liners in these cylinders. This document provides a basic level of understanding of these topics.

]]>