?u= Tue, 05 Nov 2024 23:23:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png ?u= 32 32 ?u=/product/publishers/iso/iso-47361979/ Tue, 05 Nov 2024 23:23:18 +0000 Fire tests — Small chimneys — Testing at elevated temperatures

Published By	Publication Date	Number of Pages
ISO	1979-11	8

]]> Specifies a laboratory method of test. This test is designed to test for tightness, heat insulation and mechanical strength under standard conditions and for durability against treatment such as may occur during sweeping. This test provides information on the performance under a set of prescribed temperatur and flow rate conditions, but does not provide information appropriate to specific heating appliances.

]]> ?u=/product/publishers/din/vdi-3781-part-4/ Tue, 05 Nov 2024 17:56:37 +0000 Environmental meteorology - Discharge conditions for exhaust gases - Small and medium combustion systems and other installations

Published By	Publication Date	Number of Pages
DIN	2017-07	64

]]> This standard serves to determine the minimum height of the outlets of exhaust gas discharge systems used to discharge emissions from combustion systems, from installations that release organic solvents (e.g. installations not requiring a permit within the scope of 31. BImSchV (31st German Federal Immission Control Ordinance)) and from other pollutant-emitting installations. This minimum height ensures that the air pollution control requirements are met for undisturbed removal of exhaust gas with the free airflow and for adequate dilution of the exhaust gas.

]]> ?u=/product/publishers/din/vdi-3781-blatt-4/ Tue, 05 Nov 2024 17:56:36 +0000 Umweltmeteorologie - Ableitbedingungen für Abgase - Kleine und mittlere Feuerungsanlagen sowie andere als Feuerungsanlagen

Published By	Publication Date	Number of Pages
DIN	2017-07	64

]]> Diese Richtlinie dient zur Bestimmung der Mindesthöhe der Mündungen von Abgasableiteinrichtungen, die zur Ableitung von Emissionen aus Feuerungsanlagen, aus Anlagen, die organische Lösemittel freisetzen (z. B. nicht genehmigungsbedürftige Anlagen im Anwendungsbereich der 31. BImSchV) und aus anderen Schadstoff emittierenden Anlagen eingesetzt werden. Mit dieser Mindesthöhe können die Anforderungen des Immissionsschutzes zum ungestörten Abtransport der Abgase mit der freien Luftströmung und zur ausreichenden Verdünnung der Abgase erfüllt werden.*www.vdi.de/3781

]]> ?u=/product/publishers/din/din-en-1993-3-2-na/ Tue, 05 Nov 2024 16:15:05 +0000 National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys

Published By	Publication Date	Number of Pages
DIN	2017-01	16

]]> According to EN 1993-3-2 certain parameters may be defined by the national CEN-member bodys. This national annex contents specific parameters which apply for Germany.

]]> ?u=/product/publishers/din/din-en-1993-3-2/ Tue, 05 Nov 2024 16:15:03 +0000 Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 3-2: Türme, Maste und Schornsteine - Schornsteine

Published By	Publication Date	Number of Pages
DIN	2010-12	34

]]> Ergänzung zum Eurocode 3 Teil 1. Verschiedene allgemeine Regeln und detaillierte ergänzende Regeln für die Bemessung und Konstruktion von zylindrilschen oder konischen Stahlschornsteinen.*Inhaltsverzeichnis

]]> ?u=/product/publishers/din/din-en-1859/ Tue, 05 Nov 2024 16:13:13 +0000 Chimneys - Metal chimneys - Test methods

Published By	Publication Date	Number of Pages
DIN	2013-07	50

]]> This European Standard describes test methods for metal chimney products.

]]> ?u=/product/publishers/din/din-en-1858/ Tue, 05 Nov 2024 16:13:13 +0000 Abgasanlagen - Bauteile - Betonformblöcke

Published By	Publication Date	Number of Pages
DIN	2011-09	60

]]> Diese Europäische Norm legt Werkstoffe, Maße und Leistungsanforderungen für Betonblöcke in Abgasanlagen, wie in Abschnitt 3 definiert, fest. Die Betonblöcke können einschalig oder mehrschalig sein. Diese Norm gilt nicht für Blöcke, die hinterlüftet sind. Diese Norm beschreibt eine Blockart, die mit der Schichthöhe des Mauerwerks maßlich abgestimmt ist, und als Art B (Verbundblock) bezeichnet wird.*Inhaltsverzeichnis

]]> ?u=/product/publishers/din/din-en-1856-2/ Tue, 05 Nov 2024 16:13:12 +0000 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes (Draft)

Published By	Publication Date	Number of Pages
DIN	2021-06	104

]]> This document specifies the characteristics of performance for rigid or flexible metal flue liners, rigid metal connecting flue pipes and their fittings used to convey the products of combustion from appliances to the outside atmosphere (including their supports). This document specifies sootfire resistant flue liners, connecting flue pipes and Fittings for combustion appliances burning solid,liquid and gaseous fuels and non-sootfire resistant flue liners, connecting flue pipes and Fittings for combustion appliances burning liquid and gaseous fuels only. Note: This means that flue liners, connecting flue pipes and Fittings designated "O" are not suitable for combustion appliances burning solid fuel. Vitreous enamelled connecting flue pipes are also covered by this document. Rigid flue liners can be used as flue liners for renovation or adaptation of existing chimneys and as flue liners of custom built chimneys. Flexible metal flue liners described in this document are exclusively for renovation or adaptation of existing chimneys. Flexible connecting flue pipes and extensible flexible products designed to be compressed or extended along their length are excluded from the scope of this document. This document also specifies the characteristics for marking, manufacturer's instructions, product information and evaluation of conformity. Single wall and multi-wall system chimney products (chimney sections.chimney Fittings and terminals, including supports) are covered by prEN 1856-1:2019, even if used as liners for existing chimneys or connecting flue pipes.

]]> ?u=/product/publishers/din/din-en-1856-1/ Tue, 05 Nov 2024 16:13:12 +0000 Chimneys - Requirements for metal chimneys - Part 1: System chimney products (Draft)

Published By	Publication Date	Number of Pages
DIN	2021-06	178

]]> This document specifies the characteristics of performance for single and multi-wall system chimney products with rigid metallic liners (chimney sections, chimney fittings and terminals, including supports) with nominal diameter up to and including 1200 mm, used to convey the products of combustion from appliances to the outside atmosphere. This document also specifies characteristics for the air supply ducts of concentric chimneys for room-sealed application. Additionally, it specifies characteristics for marking, manufacturer's instructions, product information and evaluation of conformity. Metal liners and metal connecting flue pipes not covered here are included in EN 1856-2:2009. This European Standard does not apply to structurally independent (free standing or self-supporting) chimneys.

]]> ?u=/product/publishers/din/din-en-1857/ Tue, 05 Nov 2024 16:13:12 +0000 Abgasanlagen - Bauteile - Betoninnenrohre

Published By	Publication Date	Number of Pages
DIN	2010-08	52

]]> Diese Europäische Norm legt Werkstoffe, Maße, Leistungsanforderungen sowie die Prüfverfahren für werkmäßig hergestellte Betoninnenrohre und -formstücke fest.*Inhaltsverzeichnis

]]>