ASTM-C880 2006
$35.75
C880-06 Standard Test Method for Flexural Strength of Dimension Stone
| Published By | Publication Date | Number of Pages |
| ASTM | 2006 | 3 |
ASTM C880-06
Historical Standard: Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880
Scope
1.1 This test method covers the procedure for determining the flexural strength of stone by use of a simple beam using quarter-point loading.
1.2 Stone tests shall be made when pertinent for the situation when the load is perpendicular to the bedding plane and when the load is parallel to the bedding plane.
1.3 As required, the flexural tests shall also be conducted under wet conditions.
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Keywords
dimension stone; flexural strength; flexure; stone; test
ICS Code
ICS Number Code 91.100.15 (Mineral materials and products)
DOI: 10.1520/C0880-06
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Significance and Use Apparatus Sampling Test Specimen |
| 2 | Conditioning Procedure Calculation Report FIG. 1 |
| 3 | Precision and Bias Keywords |
Related products
-
ASTM-C780 2006
C780-06 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced…
-
ASTM-B880 2008
B880-03(2008) Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys…
-
ASTM-C840 2000
C840-00 Standard Specification for Application and Finishing of Gypsum Board Published By Publication Date Number…
-
ASTM-C885 2002
C885-87(2002) Standard Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance Published By…
-
ASTM-C830 2000
C830-00 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density…
-
ASTM-C830 2006
C830-00(2006) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density…
-
ASTM-C890 2006
C890-06 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water…
-
ASTM-F880 2001
F880-01a Standard Specification for Stainless Steel Socket-Set Screws Published By Publication Date Number of Pages…
-
ASTM-C880 2009(Redline)
C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone (Redline) Published By Publication Date…
-
ASTM-F880 2008
F880-02(2008)e1 Standard Specification for Stainless Steel Socket-Set Screws Published By Publication Date Number of Pages…
-
ASTM-C780 2016
C780-16 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced…
-
ASTM-C780 2007
C780-07 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced…
-
ASTM-C680 2003
C680-03a Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures…
-
ASTM-C884 2005
C884/C884M-98(2005) Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay Published By…
-
ASTM-B880 2003
B880-03 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys,…
-
ASTM-C887 2005
C887-05 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar Published By Publication…
-
ASTM-C840 2004
C840-04a Standard Specification for Application and Finishing of Gypsum Board Published By Publication Date Number…
-
ASTM-F880 2008(Redline)
F880-02(2008) Standard Specification for Stainless Steel Socket-Set Screws (Redline) Published By Publication Date Number of…
-
ASTM-C840 2006
C840-06 Standard Specification for Application and Finishing of Gypsum Board Published By Publication Date Number…
-
ASTM-C580 2002
C580-02 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts,…
-
ASTM-C780 2007
C780-07a Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced…
-
ASTM-C780 2005
C780-05 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced…
-
ASTM-D880 2008
D880-92(2008) Standard Test Method for Impact Testing for Shipping Containers and Systems Published By Publication…
-
ASTM-D880 2002
D880-92(2002) Standard Test Method for Impact Testing for Shipping Containers and Systems Published By Publication…
-
ASTM-C780 2006
C780-06a Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced…
-
ASTM-C860 2000
C860-00 Standard Practices for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test Published…
-
ASTM-C808 2005
C808-75(2005) Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite…
-
ASTM-C885 2007
C885-87(2007) Standard Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance Published By…
-
ASTM-C830 2016
C830-00(2016) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density…
-
ASTM-C880 2009
C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone Published By Publication Date Number…
-
ASTM-C882 2005
C882/C882M-05e1 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant…
-
ASTM-C840 2016(Redline)
C840-16 Standard Specification for Application and Finishing of Gypsum Board (Redline) Published By Publication Date…
-
ASTM-C680 2002
C680-89(2002) Standard Practice for Determination of Heat Gain or Loss and the Surface Temperatures of…
-
ASTM-F880 2001
F880-01 Standard Specification for Stainless Steel Socket-Set Screws Published By Publication Date Number of Pages…
-
ASTM-C889 2006
C889-06 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3)…
-
ASTM-C888 2008(Redline)
C888-03(2008) Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder (Redline) Published By Publication Date Number…
-
ASTM-C882 2005
C882-05 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant…
-
ASTM-C840 2007
C840-07 Standard Specification for Application and Finishing of Gypsum Board Published By Publication Date Number…
-
ASTM-C830 2006
C830-00(2006)e1 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density…
-
ASTM-C870 2000
C870-96(2000) Standard Practice for Conditioning of Thermal Insulating Materials Published By Publication Date Number of…
