ISO 8510-1:1990
$12.35
Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 1: 90 degree peel
| Published By | Publication Date | Number of Pages |
| ISO | 1990-12 | 8 |
Particularly suitable for use with less flexible adherends for which a 180 ° peel test is not suitable because the adherends crack, break or delaminate. A bonded assembly of two adherends is prepared using the adhesive under test. The adherends are then pulled apart at a steady rate, starting at the open end of the bond, in such a way that separation occurs progressively along the length of the bonded adherends. The force is applied approximately normal to the plane of the bond, through the separated part of the flexible adherend. A figure shows a schematic diagram.
Related products
-
BS 5550-5.4.4:1986
Cinematography. Common to more than one gauge. Sound – Specification for the recorded characteristic for…
-
ISO 1391-3:1976
Paraformaldehyde for industrial use — Methods of test — Part 3: Determination of iron content…
-
BS 7560:1992
Method of assessing, testing and reporting characteristics and performance of combine harvesters Published By Publication…
-
ASCE 9780784476352 2012
Earthquakes and Engineers – An International History Published By Publication Date Number of Pages ASCE…
-
CAN/CSA-ISO/IEC 9805-1-04 (R2014):2004 Edition
Information Technology – Open Systems Interconnection – Protocol for the Commitment, Concurrency and Recovery Service…
-
BS 4515-1:2009:2008 Edition
Specification for welding of steel pipelines on land and offshore – Carbon and carbon manganese…
-
BS ISO 8514-1:1992
Micrographics. Alphanumeric computer output microforms. Quality control – Characteristics of the test slide and test…
-
BS 5293-4:1990
Sampling and testing carbon black for use in the rubber industry – Method for determination…
-
BS 341-1:1962
Transportable gas container valves – Valves with taper stems (excluding valves used for breathing and…
-
BS EN ISO 13690:2007
Cereals, pulses and milled products. Sampling of static batches Published By Publication Date Number of…
-
ISO 8512-1:1990
Marbres de traçage et de contrôle — Partie 1: Marbres en fonte Published By Publication…
-
BS 874-3.2:1990
Methods for determining thermal insulating properties. Tests for thermal transmittance and conductance – Calibrated hot-box…
-
BS 4232:1967
Specification for surface finish of blast-cleaned steel for painting Published By Publication Date Number of…
-
BS EN 28510-1:1993:1991 Edition
Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly – 90° peel Published By Publication…
-
ISO 1389-11:1977
Phthalic anhydride for industrial use — Methods of test — Part 11: Determination of iron…
-
ISO/IEC 9805-1:1998
Information technology — Open Systems Interconnection — Protocol for the Commitment, Concurrency and Recovery service…
-
BS EN 850:1997:2001 Edition
Transportable gas cylinders. Pin-index, yoke-type valve outlet connections for medical use Published By Publication Date…
-
BS EN 28510-2:1993:1991 Edition
Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly – 180° peel Published By Publication…
-
BS EN ISO 8560:2019
Technical drawings. Construction drawings. Representation of modular sizes, lines and grids Published By Publication Date…
-
BS EN ISO 8510-2:2010:2011 Edition
Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly – 180 degree peel Published By…
-
BS EN ISO 7510:2024
Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents Published By…
-
ASTM-D1790:2002 Edition
D1790-02 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact Published By Publication…
-
ISO 1694:1976
Cryolite, natural and artificial — Determination of iron content — 1,10- Phenanthroline photometric method Published…
-
BSI PD IEC/TR 62131-4:2011
Environmental conditions. Vibration and shock of electrotechnical equipment – Equipment transported in road vehicles Published…
-
AS 1004.1:1998
Surface plates for metrology – Cast iron Published By Publication Date Number of Pages AS…
-
BS 5510:1991
Methods for determination of maximum speeds of agricultural wheeled tractors Published By Publication Date Number…
-
BS 6069-3.2:1991
Characterization of air quality. Workplace atmospheres – Method for the determination of particulate lead and…
-
BS 6400-1:2006
Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not…
-
AS 1004.2:1998
Surface plates for metrology – Granite Published By Publication Date Number of Pages AS 1998-06-05…
-
BS 5293-4:1996
Sampling and testing carbon black for use in the rubber industry – Method for determination…
-
BS 6000:1996
Guide for the selection of an acceptance sampling system, scheme or plan for inspection of…
-
BS 4184:1994
Glossary for power presses, open front mechanical type Published By Publication Date Number of Pages…
-
BS EN ISO 7083:2021 – TC
Tracked Changes. Technical product documentation. Symbols used in technical product documentation. Proportions and dimensions Published…
-
IEEE 802.1t-2001
IEEE Standard for Information technology – Telecommunications and information exchange between systems – Local and…
-
BS EN ISO 8560:1999
Construction drawings. Representation of modular sizes, lines and grids Published By Publication Date Number of…
-
BS ISO 8514-2:1992
Micrographics. Alphanumeric computer output microforms. Quality control – Method Published By Publication Date Number of…
-
BS ISO/IEC 9805-1:1998:1999 Edition
Information technology. Open systems interconnection. Protocol for the commitment, concurrency and recovery service element –…
-
BSI PD IEC/TR 62131-4:2011
Environmental conditions. Vibration and shock of electrotechnical equipment – Equipment transported in road vehicles Published…
-
BS 6913-15:1997
Operation and maintenance of earth-moving machinery – Specification for service tools. Mechanical pullers and pushers…
-
ISO 1390-6:1977
Maleic anhydride for industrial use — Methods of test — Part 6: Determination of iron…
