WRC 294:1984
$16.90
Part 1: Creep of Bolted Flanged Connections
| Published By | Publication Date | Number of Pages |
| WRC | 1984 | 28 |
A previous analysis of the creep of bolted flanged connections by E. O. Waters is extended to include strain hardening creep and an unspecified distribution of stress over the flange rings. The results are compared to a finite element analysis and to results obtained with Waters' equations.
Related products
-
BS 638-7:1984
Arc welding power sources, equipment and accessories – Specification for safety requirements for installation and…
-
B2.1-1-022:1994 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or PWHT Condition
B2.1-1-022:1994 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1/S-1,…
-
WRC 265:1981
Interpretive Report on Small Scale Test Correlations with Klc Data Published By Publication Date Number…
-
WRC 096:1964
Part 1: Stresses Near a Cylindrical Outlet in a Spherical Vessel Published By Publication Date…
-
WRC 194:1974 (R1978)
Fatigue Behavior of Pressure-Vessel Steels Published By Publication Date Number of Pages WRC 1974 28
-
WRC 272:1981
Part 1: Design of Beam Columns with Lateral-Torsional End Restraints Published By Publication Date Number…
-
WRC 264:1980
The Influence of Multiaxial Stress on Low-Cycle Fatigue of Cr-Mo-V Steel at 1000 degrees F…
-
WRC 193:1974
Basic Considerations for Tubular Joint Design in Offshore Construction Published By Publication Date Number of…
-
WRC 094:1964
The Design of Thick-Walled Closed-Ended Cylinders Based on Torsion Data Published By Publication Date Number…
-
ASCE CRS ComputerApplications 2020
Construction Research Congress 2020 – Computer Applications Published By Publication Date Number of Pages ASCE…
-
WRC 296:1984
Fitness-For-Service Criteria for Pipeline Girth-Weld Quality Published By Publication Date Number of Pages WRC 1984…
-
B2.1-1-018:1994 Standard Welding Procedure Specification (SWPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel, (M-1/P-1/S-1, Group 1 or 2),1/8 Through 1-1/2 Inch Thick, E71t-8, As-Welded Condition
B2.1-1-018:1994 Standard Welding Procedure Specification (SWPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel,…
-
WRC 291:1984
Fracture Control of Pressure Vessels up to 2 1/2 Inches Thick Published By Publication Date…
-
B2.1-1-016:1994 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition
B2.1-1-016:1994 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1/S-1,…
-
B2.1-1-026:1994 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010(Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition
B2.1-1-026:1994 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1/S-1,…
-
WRC 293:1984
Current Welding Research Problems Published By Publication Date Number of Pages WRC 1984 70
-
WRC 100:1964
Electron Beam Welding Published By Publication Date Number of Pages WRC 1964 29
-
WRC 316:1986
Part 1: Technical Position on Piping System Installation Tolerances; Part 2: Technical Position on Damping…
-
B2.1-1-017:1994 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010, As-Welded or PWHT Condition
B2.1-1-017:1994 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1/S-1,…
-
WRC volume 39 No. 08:1984
Progress Reports Volume 39 No. 08 Published By Publication Date Number of Pages WRC 1984…
-
WRC 274:1982
Part 1: International Benchmark Project on Simplified Methods for Elevated Temperature Design and Analysis; Problem…
-
WRC 363:1991
Recommended Practices in Elevated Temperature Design: A Compendium of Breeder Reactor Experiences (1970-1987): A Compendium…
-
BS EN 29692:1994
Specification for metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint preparations…
-
WRC 288:1983
Fracture of Pipelines and Cylinders Containing a Circumferential Crack Published By Publication Date Number of…
-
WRC 295:1984
Fundamentals of Weld Discontinuities and Their Significance Published By Publication Date Number of Pages WRC…
-
WRC 297:1987:1984 Edition
Local Stresses in Cylindrical Shells Due to External Loadings on Nozzles-Supplement to WRC Bulletin No.…
-
WRC 394:1994
Simplified Methods for Creep-Fatigue Damage Evaluations and the Application to Life Extension Published By Publication…
-
B2.1-1-021:1994 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, Er70s2 and E7018, As-Welded or PWHT Condition
B2.1-1-021:1994 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding Followed by Shielded Metal…
-
WRC 299:1984
Part 1: Engineering Aspects of CTOD Fracture Toughness Testing; Part 2: Three-Dimensional Elastic-Plastic Finite Element…
-
WRC 290:1983
Factors Affecting Porosity in Aluminum Welds – A Review Published By Publication Date Number of…
-
WRC volume 42 No. 07-08:1987
Progress Reports Volume 42 No. 07-08 Published By Publication Date Number of Pages WRC 1987…
-
WRC 298:1984
Long-Range Plan for Pressure-Vessel Research – Seventh Edition Published By Publication Date Number of Pages…
-
WRC 292:1984
PVRC Milestone Gasket Tests – First Results Published By Publication Date Number of Pages WRC…
-
BS 2782-5:Method 540B:1982
Methods of testing plastics. Optical and colour properties, weathering – Methods of exposure to laboratory…
-
WRC 279:1982
Part 1: Weldability and Fracture Toughness of Quenched and Tempered 9% Nickel Steel: Weld Simulation…
-
WRC volume 36 No. 04:1981
Progress Reports Volume 36 No. 04 Published By Publication Date Number of Pages WRC 1981…
-
WRC volume 42 No. 11-12:1987
Progress Reports Volume 42 No. 11-12 Published By Publication Date Number of Pages WRC 1987…
-
WRC 284:1983
The External Pressure Collapse Tests of Tubes Published By Publication Date Number of Pages WRC…
-
B2.1-8-023:1994 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel, (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition
B2.1-8-023:1994 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel,…
-
NZS 4702:1982
Metal-arc welding of grade 275 reinforcing bar Published By Publication Date Number of Pages SNZ…
